Finally, Emax's tinyhawk III! Its superb that they made the new version in a short period of time! As Tinyhawk II is not that old. Their RTF kits are amazing and the tinyhawks' mass is same as always... Negligible like one is holding a paper! Controller is really beautiful... And the goggles are also mind blowing!!! Never knew that it was that good. Looks really stable indoors... I like these types of drones which are really small amazing cinewhoops, which are durable, that can do impressive and astonishing cool things and also costs not much!
Easily one of the best RTF starter kits you've reviewed on this channel. I'm impressed that the goggles still have some utility even if you want to purchase a more advanced set to replace them. Only other goggles I know that can do that would be Eachine's EV800D and the FXT Viper. Still not quite as impressive as the Novice IV kit, but this is roughly half the price so that's something to consider. Thanks for the great review as always!
Love my tinyhawk II.. this seems to have a lil better camera and less kV motors less power & longer flight time.. outside seems the same. Looks tiny bit different. I use my old tinyhawk ii rtf case for x9 lite transmitter and 03o goggles
i think this is the best beginner kit shown to date, especially because there is a screen and no need to have a cell phone, just because of that i'd consider it even not being a beginner
I just ordered mine. I had a wonderful time with my Hubsan Zino GPS drone but now it's time to start doing stunt FPV. I could have the drone tomorrow in another store if I want, however one store is closed for 2 weeks and they give 15% discount on all orders while closed. I'm a patient man.
I just ordered one of these, an upgrade from my Makerfire Micro FPV Shark drone. Love that little blue bugger but I think this'll be a great upgrade. Thanks for the review!
Best review I've seen so far for a fpv beginner. If I order it now from banggood. I might get it by spring here in the US. I wish Amazon would have these. Thanks Cap't!!
So I just got my fix for glasses yesterday. I own the BetaFPV Cetus Lite kit (got it about a week ago) I tried using Armless reading glasses with the Cetus goggles. they sort of worked but after a few minutes they tended (about 50% of the time) to tilt on my nose inside the goggles. sometimes falling off entirely. my fix was to buy a comfort kit for a VR headset (Quest 2) by KIWI. its a padded face pad with glasses extension for VR goggles($19.99). I Duct taped them on. they hold solid. my regular glasses fit inside and the FPV goggles are very comfy. I'm hoping when upgrading to a bigger drone kit (I'm not a serious FPVer so my next kit will probably be the E_MAX EAZY Pilot Pro) that they will fit that as well.
Love my TH3. The dogs snatched it out of the air a few too many times and the frame is cracked in several places. I like to fly it outdoors in a stiff gusty breeze. It shimmies when the wind kicks up because of the broken frame, but it still flies great. Reminds me of the movie "Batteries Not Included" where the heroic little injured drone was trying to fly. Probably will get another frame for it, but have been looking for something similar in an ARF. I've been watching your beginner videos but you are so enthusiastic, it is hard to make a decision based on your glowing reviews.
This is awesome! I had to sell all my FPV gear last summer to help start my business. I have been sad ever since, so this will be a great kit to get back into it!
Yup, EMAX wanted to launch this drone today and anyone who received an advanced copy was only permitted to post their reviews all at the same time. Same thing DJI does.
what's happen Steven just want thank you i just flew my dji Mavic Air 2 I'm blown away thank you for helping me decide through your video review thank you sir again
Thanks to the Emax Tinyhawk 2 series of quads I got into fpv. I’ll always have a special place in my fpv heart for Emax. What a great company for beginners and beyond. Great review! Thank you !
I was never going to be able to use these goggles I am old and need reading glasses now. I got a digiadapter and a rapid fire module today and am now flying my tinyhawk 3 using my dji v2 goggles. 🙂😄😁😀
Well… First of all … as a beginner myself… I call it Fascinating 😜… as far as the drone itself and the whole kit is concerned… impressive 👍 Here in Germany only the „old“ version no.2 is available… so I guess I wait 🙏🏻 Stay safe everybody…👋
I was looking at the BETAFPV Cetus Lite FPV Drone after your review, but now I'm looking at this Tiny Hawk 3.... I love your enthusiasm. I'm just looking for a drone to mess around with inside my house. not sure I won't have motion sickness with FPV. I get a little VR sickness with my VR headset when doing Flight sims or Roller Coasters sims. but only when not looking straight ahead when doing those sims (ie. if I turn my head while flying a plane to watch an enemy plane go down or look to the side when on a Roller Coaster to watch scenery go by). if I look straight ahead my stomach is fine.
I bought the Betafpv Cetus lite. came today. "OMG that thing is tiny!" (first thoughts upon opening the box). I charged everything. was so happy the batteries only take 20 minutes to charge. never having flown anything RC before I was very careful with my first take off from my coffee table. not sure why but the thing tends to "jump" into the air. after hours of practice, it still jumps into the air. by jump I mean about 6" from resting to airborne. I thought I saw you do a smooth take off. anyway, the "jump" doesn't bother me that much. flying around the house minus the goggles was fun! after I was able to complete a circuit of my living room and kitchen several times without getting confused as to what joystick does what I decided to try the Goggles. I wear glasses but I have a pair of Arm less reading glasses ($9.99 Amazon) that clip onto my nose. they worked great! fit right into the headset. I was able to fly around the same living room and kitchen. it was a blast of a day! get the oval arm less reading glasses not the rectangle ones. THANKS for your review. I think I'm on my way to a new hobby.
its the next day, I flew it around the house last night for awhile, went to bed. got up this morning and went to get my new "Toy". I found that at some point last night I sort of "bent" one of the batteries. possibly in one of my many crashes last night. the battery still works, still takes a charge and still puts out a charge. so I'll continue to use it. thank god the batteries are so cheap! this thing really is fun. is it $153.00 fun? don't know yet. side note: yesterday my German Shepherd/Retriever was very wary of the drone and didn't want to be in the same room with it. this morning all the doors out of my living room are closed (because peeps are sleeping) so she just layed at my feet. that is until I lost control and almost hit my head with it. got control inches from my head. and as I was flying away, all of a sudden the dog went laying to a full jump and tried to take it out of the air. LOL. she was sort of fine with until she saw it "attack" me, or "threaten" me. (8 batteries for $40.00, Amazon, not bad).
I’d highly recommend new pilots know how to calibrate the gyro and fix trim through the remote. This will really make flying much more enjoyable. To have your tiny, just hover when you push up on the throttle rather then drift makes learning so much easier. Joshua did a great video on this: czcams.com/video/otJNzZrE-yk/video.html
No Beginner here I’m just starting over🧐😎. Captain if you confirm the controller will bind with a FRS D8 please let me know. Another very informative video. Thanks Captain
The manual says it defaults to D8 mode (out of the box) which means it should bind to Frsky D8 receivers. The online manual explains how to switch it to D16 mode for binding to such receivers.
Nice video cap, wow all the brands that make rtf fpv kit is getting more interesting Hey there is a new version of fimi x8 2022 that has 1/2 inch sensor, are you going to review it?
If you are new to the world of marketing, companies like DJI will have a flood of reviews when a product is launched (DJI controls the launch). Other companies like EMAX do the same thing. They control when the videos are launched for a new product release.
Thanks for another great video. A few years ago (🤔actually many years ago😟) I used to fly radio controlled model aeroplanes, panic biplanes to be precise. They were aerobatic planes fitted with fast petrol engines. I would practise aerobatics and have dog fights with other flyers using paper streamers attached to the planes (chew up you opponents streamer with your prop) Anyway with that model flying experience behind me do you think I would be OK with a drone or would I struggle, should I be looking at something like this as a starter or something else. Your opinion would be great, thank you. Dang how I wish mini cameras had been available back then.
Am I understanding correctly that the only video you can record with this one over say a GEPRC TinyGO 4K, is the analog video that the goggles see? I feel like thats a huge difference between the two if so. Im struggling between them both right now and cannot make up my mind!
Oh bro... 🤦♂️ I just bought me the Emax TinyHawk Freestyle 2 a coupl'a weeks ago. Now this bloody thing comes out! But i gotta say, that's a pretty bloody sweet controller, i reckon. 😁 Surely this'll give GEPRC TinyGO a run for their money. I wonder if its sold drone & controller only. And if it also runs on 2s Emax batteries too.
so I got this drone but the beeper doesn't work and it won't show the battery voltage on the screen it says zero even when I fly is there a way to fix that
Hi Cap, Great vids and reviews!! Torn between TH3 and TinyGo, which do you recommend for beginners like me that wants to start on RTF kits? Both drones are almost in the same price point from where I live. Or should I go and buy separate goggles, radio & drone (eyeing on the Mobula6 or Eachine Trashcan) Thanks Cap!
Save your money, get Uncrashed on Steam instead, and something like a TX-16s for controller. Stick my free sound pack on it. Fly all you want for as long as you want, crash all you want, pay not a cent more.
@@Trekeyus I loved my TX16s all teh way up to the point it died in less than a year. I havetwo, so... 50% failure rate? Be very careful with those junk USB-C connectors - they are not voltage protected and not rated for that many push pulls. They will be the first thing to fail on your radio. In my case, it was the main board that failed when I inserted the top USB-C connector in to play a sim. Still the best radio IMHO but.. that being said, leaves a lot to be desired as there's a lot far less than perfect from it. All the other radios though are just really much worse.
@@Trekeyus That's what I use, the NetDot12 L shaped variety, but be careful with them, they don't always line up, and the donut magnets will come out... you may need to glue them back in iwth super glue. I have one like that now. What I do is unplug and plug things with the other end of the cable into a hub... the USB-A connector side... so the wear and tear happens on the other end of the cable, and not the radio. That's my main fault with the TX-15s.. the USB-C connectors instead of USB-A. If you have phones or tablets, you know these microsub connectors are the first to fail... and then your device is useless.
So in the package you receive from Amazon (or the place you purchase the drone from) where does it say to push all of the switches forward before tying to activate? Where are the instructions to customize without using a 3rd party vendor? (Whom ever scanned that QR code for you was not included in the package)… As a promoter/sales rep, before you submit your next video, imagine being a rural teacher who blew their entire 5th grade classroom budget on this bc it was so “beginner friendly”. Only to find it’s a piece of junk. My hairline isn’t receding as much but when it starts. I hope to still remember the equity and aptitude of those without a massive CZcams following.
I bought a couple of these for me and my neighbor. How do we get them on separate channels so we don't get interference while flying next to each other?
Are you saying they are on the same controller frequency (like you move a joystick and both drones move)? That would be odd. Now if you mean the same video frequency then that is normal and it is up to one of you to change that on the drone & goggles.
I honestly don’t know because with DJI it is just a simple software setting adjustment for a GPS drone where both sticks are centered. In the FPV hobby the left (throttle) joystick is not centered. See if you can download the manual
If you are a beginner then stick with something you can use in your house as well as outside, and something that you don't mind destroying, because as a newbie, you'll destroy your FPV drone within a day or two unless you have some skills. Another option to consider is the BETAFPV CETUS PRO or CETUS X
@@CAPTAINDRONE798 thank you! I'm trying to make a gift to my brother. He's flown 2 drones but not a lot. He has crashed both so I'm trying to find something that will take a beating and not cheap quality. He flies outdoors. I'll take a look!
Goggles with individual lenses usually cost around $500 and up for anything worth buying, and that is just for the goggles...... so I believe that answers your question.
@@CAPTAINDRONE798 oh perfect! Because i am considering this kit, unfortunately i can only see properly through one eye so the single lense googles are my only way to go. If this kit has a single lens then it is a win for me 😁
I just got the Tinyhawk3 to practice indoors, I'm trying to bind it to my E6 transmitter that I got from the Tinyhawk 2 Freestyle RTF kit but for whatever reason it will not bind. They are both FrSky D8 so it should work. Anyone any ideas or like a specific step-by-step guide? I'm new into this hobby and can't seem to find clear instructions on this on any emax guide, forum or so.
You’ll have to ask Emax for the binding steps. There is a certain way to put the drone in bind mode and a certain way to put the controller in bind mode. Once you have that then they should bind.
I did it. This old fart with too many drones just picked this up. Figured my decades of R/C airplane flying would help. This little guy is TOUGH!!! I'll get it though.
Hiw do you record I press the record button once I'm done flying I take it out and then put the SD into an adapter and the adapter in my DVD player and it sais this devise is empty
If you don't see the RECORD red dot in your goggles then it probably is not recording which means you more than likely stuck an unreadable card in the unit like one that is WAY TOO BIG in size or formatted in a way that only your computer can read.
Finally, Emax's tinyhawk III!
Its superb that they made the new version in a short period of time!
As Tinyhawk II is not that old.
Their RTF kits are amazing and the tinyhawks' mass is same as always...
Negligible like one is holding a paper!
Controller is really beautiful...
And the goggles are also mind blowing!!!
Never knew that it was that good.
Looks really stable indoors...
I like these types of drones which are really small amazing cinewhoops, which are durable, that can do impressive and astonishing cool things and also costs not much!
Easily one of the best RTF starter kits you've reviewed on this channel. I'm impressed that the goggles still have some utility even if you want to purchase a more advanced set to replace them. Only other goggles I know that can do that would be Eachine's EV800D and the FXT Viper. Still not quite as impressive as the Novice IV kit, but this is roughly half the price so that's something to consider. Thanks for the great review as always!
Two years i have abused crashed and enjoyed the tiny hawk 2, still original everything, a great beginner drone.
so this one will be a great buy.
Another great Video! And to top it off, my stickers arrived all the way over here in the UK today! Thanks Steve & Nikki!
You're most welcome!
Well, I did it I pulled the trigger I purchased this today! All because of Captain Drones review. Rhank you very much sir.
Glad I could help! Enjoy!
Ah that's the starter kit I need as a glasses wearer .Sweet !
Love my tinyhawk II.. this seems to have a lil better camera and less kV motors less power & longer flight time.. outside seems the same. Looks tiny bit different. I use my old tinyhawk ii rtf case for x9 lite transmitter and 03o goggles
i think this is the best beginner kit shown to date, especially because there is a screen and no need to have a cell phone, just because of that i'd consider it even not being a beginner
Great review Captain i think i might venture into the FPV world with this piece of kit. Thanks for the review, Cheers from Australia
I just ordered mine. I had a wonderful time with my Hubsan Zino GPS drone but now it's time to start doing stunt FPV.
I could have the drone tomorrow in another store if I want, however one store is closed for 2 weeks and they give 15% discount on all orders while closed.
I'm a patient man.
I still think that this review is probably one of the best reviews on this kit.
Thank you!
I just ordered one of these, an upgrade from my Makerfire Micro FPV Shark drone. Love that little blue bugger but I think this'll be a great upgrade. Thanks for the review!
Nice review. The only things I would have liked you to cover was flying it with the included display and it’s indoor and outdoor ranges.
Best review I've seen so far for a fpv beginner. If I order it now from banggood. I might get it by spring here in the US. I wish Amazon would have these. Thanks Cap't!!
Thanks! Good news. In the past 4 months products shipped from Banggood by postal have been showing up within two to three weeks vice the 3 months.
@@CAPTAINDRONE798 That is good news TY. So many other items from them I thought about. 3weeks WOW. Years ago it was 6 to 8 weeks. Appreciate the info.
So I just got my fix for glasses yesterday. I own the BetaFPV Cetus Lite kit (got it about a week ago) I tried using Armless reading glasses with the Cetus goggles. they sort of worked but after a few minutes they tended (about 50% of the time) to tilt on my nose inside the goggles. sometimes falling off entirely. my fix was to buy a comfort kit for a VR headset (Quest 2) by KIWI. its a padded face pad with glasses extension for VR goggles($19.99). I Duct taped them on. they hold solid. my regular glasses fit inside and the FPV goggles are very comfy. I'm hoping when upgrading to a bigger drone kit (I'm not a serious FPVer so my next kit will probably be the E_MAX EAZY Pilot Pro) that they will fit that as well.
Cool! Thanks for sharing
Love my TH3. The dogs snatched it out of the air a few too many times and the frame is cracked in several places. I like to fly it outdoors in a stiff gusty breeze. It shimmies when the wind kicks up because of the broken frame, but it still flies great. Reminds me of the movie "Batteries Not Included" where the heroic little injured drone was trying to fly. Probably will get another frame for it, but have been looking for something similar in an ARF. I've been watching your beginner videos but you are so enthusiastic, it is hard to make a decision based on your glowing reviews.
I love this video so much because I’m geting the tiny hawk 3 tomorrow so thank you so much for this video
It's sad I didn't discover this channel before. Thanks for the amazing reviews 👍
Thank you for that & welcome to the channel!
U and Drone Camps need to make a Collab
This is awesome! I had to sell all my FPV gear last summer to help start my business. I have been sad ever since, so this will be a great kit to get back into it!
To me Emax has some of the best drones especially for beginners
Looks awesome. Might buy one for Christmas!
7 reviews for this all in 5 min lol. Thanks for representing us Canadian folks haha. Great review as always 👍
Yup, EMAX wanted to launch this drone today and anyone who received an advanced copy was only permitted to post their reviews all at the same time. Same thing DJI does.
Hi Rick air2 s army out
what's happen Steven just want thank you i just flew my dji Mavic Air 2 I'm blown away thank you for helping me decide through your video review thank you sir again
Glad you are enjoying it!
Another good review Steve. Neat little drone.
Thanks to the Emax Tinyhawk 2 series of quads I got into fpv.
I’ll always have a special place in my fpv heart for Emax. What a great company for beginners and beyond.
Great review! Thank you !
Excellent Review, and Excellent Flying Of The Emax Tinyhawk 3. Excellent Value! Thank You.
Tinyhawk 3, 5-28-2023 - 6-11-2023. Rest in peace. 😕 Bad board I'm hearing. Back to the shop.
nice review. I'm interested in flying FBV. This looks like a fun one to learn on. Thanks again
Do it mate - you’ll never look back I promise you 👍🤜🏻🤛🏻
I was never going to be able to use these goggles I am old and need reading glasses now. I got a digiadapter and a rapid fire module today and am now flying my tinyhawk 3 using my dji v2 goggles. 🙂😄😁😀
Well…
First of all … as a beginner myself…
I call it Fascinating 😜… as far as the drone itself and the whole kit is concerned… impressive 👍
Here in Germany only the „old“ version no.2 is available… so I guess I wait 🙏🏻
Stay safe everybody…👋
In Deutschland könnten wir die überall fliegen oder?
Try disarming in the air and arm it back
I was looking at the BETAFPV Cetus Lite FPV Drone after your review, but now I'm looking at this Tiny Hawk 3.... I love your enthusiasm. I'm just looking for a drone to mess around with inside my house. not sure I won't have motion sickness with FPV. I get a little VR sickness with my VR headset when doing Flight sims or Roller Coasters sims. but only when not looking straight ahead when doing those sims (ie. if I turn my head while flying a plane to watch an enemy plane go down or look to the side when on a Roller Coaster to watch scenery go by). if I look straight ahead my stomach is fine.
I bought the Betafpv Cetus lite. came today. "OMG that thing is tiny!" (first thoughts upon opening the box). I charged everything. was so happy the batteries only take 20 minutes to charge. never having flown anything RC before I was very careful with my first take off from my coffee table. not sure why but the thing tends to "jump" into the air. after hours of practice, it still jumps into the air. by jump I mean about 6" from resting to airborne. I thought I saw you do a smooth take off. anyway, the "jump" doesn't bother me that much. flying around the house minus the goggles was fun! after I was able to complete a circuit of my living room and kitchen several times without getting confused as to what joystick does what I decided to try the Goggles. I wear glasses but I have a pair of Arm less reading glasses ($9.99 Amazon) that clip onto my nose. they worked great! fit right into the headset. I was able to fly around the same living room and kitchen. it was a blast of a day! get the oval arm less reading glasses not the rectangle ones. THANKS for your review. I think I'm on my way to a new hobby.
its the next day, I flew it around the house last night for awhile, went to bed. got up this morning and went to get my new "Toy". I found that at some point last night I sort of "bent" one of the batteries. possibly in one of my many crashes last night. the battery still works, still takes a charge and still puts out a charge. so I'll continue to use it. thank god the batteries are so cheap! this thing really is fun. is it $153.00 fun? don't know yet. side note: yesterday my German Shepherd/Retriever was very wary of the drone and didn't want to be in the same room with it. this morning all the doors out of my living room are closed (because peeps are sleeping) so she just layed at my feet. that is until I lost control and almost hit my head with it. got control inches from my head. and as I was flying away, all of a sudden the dog went laying to a full jump and tried to take it out of the air. LOL. she was sort of fine with until she saw it "attack" me, or "threaten" me. (8 batteries for $40.00, Amazon, not bad).
Let’s try this again. 🤔
Awesome thanks, I am looking to get into FPV and this would be perfect
Do it mate, it’s so immersive it’s incredible 👍🤜🏻🤛🏻
That’s awesome! Christmas list!!!!!
So… the video will not in fact play back on the display only with the card in a computer. Contrary to what many reviewers have stated. Good demo here.
The video recorded on the included screen, can play back on the screen for sure.
Was about to order the tinygo but since this drones controller is compatible with other drones I might go with the tiny hawk
whoa the tinyhawk 3 pack is so much better that the tinyhawk 2 pack that i have
Emax Tinyhawk 3 Freestyle RTF kit? Please Emax!
I like the simplicity. But as a beginner, I'll be starting out with digital because like the clearer image.
I would love this kit minus the drone
I still use my emax tiny hawk 1 all the time :) awesome little drones
Soon bro, tinyhawk3 😊
Thank you for recommending this one
I’d highly recommend new pilots know how to calibrate the gyro and fix trim through the remote. This will really make flying much more enjoyable. To have your tiny, just hover when you push up on the throttle rather then drift makes learning so much easier. Joshua did a great video on this: czcams.com/video/otJNzZrE-yk/video.html
Detachable display idms great
I tried to order 2 of the tinyhawk 2 kits and both were cancelled on me. Maybe it was a sign :)
I love my EMax Tinyhawk II Freestyle, just not for beginners.
Nice flying Captain Drone and very educational, thanks.
Glad you enjoyed it
No Beginner here I’m just starting over🧐😎.
Captain if you confirm the controller will bind with a FRS D8 please let me know. Another very informative video.
Thanks Captain
The manual says it defaults to D8 mode (out of the box) which means it should bind to Frsky D8 receivers. The online manual explains how to switch it to D16 mode for binding to such receivers.
@@CAPTAINDRONE798 this is great information 🤝
Thank you for this review!
You can fly 2s on the th3 aswell. No one on youtube has done it
I hope They Will make a freestyle version of this!
Nice video cap, wow all the brands that make rtf fpv kit is getting more interesting
Hey there is a new version of fimi x8 2022 that has 1/2 inch sensor, are you going to review it?
I did tell the company I would review it, but have not seen it.
I've just got 5 notifications of 5 different youtubers reviewing the Emax TinyHawk 3 in a row.
I posted this on the 5 channels.
If you are new to the world of marketing, companies like DJI will have a flood of reviews when a product is launched (DJI controls the launch). Other companies like EMAX do the same thing. They control when the videos are launched for a new product release.
@@CAPTAINDRONE798 so far your the second channel to point out companies do timed releases. One of them told me to ask emax themselves. 😄
Nice drone cool video
The screen was cool!
The video flickers and freezes at times as seen, is this how the video recording will playback .
Yes, that is analog FPV. Your brain does not notice it when you fly since you are more concentrating on where you are flying.
Thanks for another great video.
A few years ago (🤔actually many years ago😟) I used to fly radio controlled model aeroplanes, panic biplanes to be precise. They were aerobatic planes fitted with fast petrol engines. I would practise aerobatics and have dog fights with other flyers using paper streamers attached to the planes (chew up you opponents streamer with your prop) Anyway with that model flying experience behind me do you think I would be OK with a drone or would I struggle, should I be looking at something like this as a starter or something else. Your opinion would be great, thank you. Dang how I wish mini cameras had been available back then.
Should I get tinyhawk 3 rtf or babyhawk 2 rtf on banggood
Nice hat👍
what's the best antenna upgrade I can get for the googles
Am I understanding correctly that the only video you can record with this one over say a GEPRC TinyGO 4K, is the analog video that the goggles see? I feel like thats a huge difference between the two if so. Im struggling between them both right now and cannot make up my mind!
This thing looks awsome
Hello is this kit better than the Cetus Pro kit?
Last week I just bought the beta FPV kit one week clearly too early
i need this.
5:12 yo that cool
Is this kit better than the Cetus pro kit
Oh bro... 🤦♂️
I just bought me the Emax TinyHawk Freestyle 2 a coupl'a weeks ago. Now this bloody thing comes out!
But i gotta say, that's a pretty bloody sweet controller, i reckon. 😁
Surely this'll give GEPRC TinyGO a run for their money.
I wonder if its sold drone & controller only.
And if it also runs on 2s Emax batteries too.
so I got this drone but the beeper doesn't work and it won't show the battery voltage on the screen it says zero even when I fly is there a way to fix that
If it is brand new, you then need to contact EMAX.
Hi Cap,
Great vids and reviews!!
Torn between TH3 and TinyGo, which do you recommend for beginners like me that wants to start on RTF kits? Both drones are almost in the same price point from where I live.
Or should I go and buy separate goggles, radio & drone (eyeing on the Mobula6 or Eachine Trashcan)
Thanks Cap!
Tiny Hawk 3 has a drone that can be smashed around and still survive. All beginners in the FPV hobby crash their drones a heck of alot.
@@CAPTAINDRONE798 Thanks for the reply Cap, you're awesome. I'll definitely consider this!
Save your money, get Uncrashed on Steam instead, and something like a TX-16s for controller.
Stick my free sound pack on it. Fly all you want for as long as you want, crash all you want, pay not a cent more.
This controller also works with flight sims.
I love my tx16s I upgraded to Edge TX. been using liftoff to practice and I'm loving it.
@@Trekeyus I loved my TX16s all teh way up to the point it died in less than a year. I havetwo, so... 50% failure rate?
Be very careful with those junk USB-C connectors - they are not voltage protected and not rated for that many push pulls. They will be the first thing to fail on your radio. In my case, it was the main board that failed when I inserted the top USB-C connector in to play a sim.
Still the best radio IMHO but.. that being said, leaves a lot to be desired as there's a lot far less than perfect from it. All the other radios though are just really much worse.
@@choppergirl sounds like I might want to get one of the magnetic quick disconnect USB c cable's then
@@Trekeyus That's what I use, the NetDot12 L shaped variety, but be careful with them, they don't always line up, and the donut magnets will come out... you may need to glue them back in iwth super glue. I have one like that now.
What I do is unplug and plug things with the other end of the cable into a hub... the USB-A connector side... so the wear and tear happens on the other end of the cable, and not the radio.
That's my main fault with the TX-15s.. the USB-C connectors instead of USB-A. If you have phones or tablets, you know these microsub connectors are the first to fail... and then your device is useless.
Qual a velocidade máxima ? E distância ??
I love Your videos! Mate do it more and more 👍
Thanks! Will do!
Yes is my first quad 👍😉👌
Doesn't the connection swivel around ?
What do you mean “connection swivel around” ???
Can you use a Tinyhawk 3 Remote and goggles with the bind and fly tiny hawk 2 freestyle?
Probably, but I've never tried it
Thank u
So in the package you receive from Amazon (or the place you purchase the drone from) where does it say to push all of the switches forward before tying to activate? Where are the instructions to customize without using a 3rd party vendor? (Whom ever scanned that QR code for you was not included in the package)… As a promoter/sales rep, before you submit your next video, imagine being a rural teacher who blew their entire 5th grade classroom budget on this bc it was so “beginner friendly”. Only to find it’s a piece of junk.
My hairline isn’t receding as much but when it starts. I hope to still remember the equity and aptitude of those without a massive CZcams following.
Super drone.
Sir please give
great review
Thank You
I bought a couple of these for me and my neighbor. How do we get them on separate channels so we don't get interference while flying next to each other?
Are you saying they are on the same controller frequency (like you move a joystick and both drones move)? That would be odd. Now if you mean the same video frequency then that is normal and it is up to one of you to change that on the drone & goggles.
Have fun
great video is it possible to fly in stick mode 3 on this drone? Been wanting to try FPV and unfortunately fly mode 3 on DJI. Thanks
I honestly don’t know because with DJI it is just a simple software setting adjustment for a GPS drone where both sticks are centered. In the FPV hobby the left (throttle) joystick is not centered. See if you can download the manual
What are your thoughts on the GEPRC TinyGO 4K FPV vs Tinyhawk III FPV Racing Drone?
If you are a beginner then stick with something you can use in your house as well as outside, and something that you don't mind destroying, because as a newbie, you'll destroy your FPV drone within a day or two unless you have some skills. Another option to consider is the BETAFPV CETUS PRO or CETUS X
@@CAPTAINDRONE798 thank you! I'm trying to make a gift to my brother. He's flown 2 drones but not a lot. He has crashed both so I'm trying to find something that will take a beating and not cheap quality. He flies outdoors. I'll take a look!
Great review bro.
I got this drone but accidentally pressed the button on the drone my signal hasn’t been the same since
The goggles that come with kit, are they like the eachine vrd2 googles that just have a magnifying len as opposed to, two individual lens?
Goggles with individual lenses usually cost around $500 and up for anything worth buying, and that is just for the goggles...... so I believe that answers your question.
@@CAPTAINDRONE798 oh perfect! Because i am considering this kit, unfortunately i can only see properly through one eye so the single lense googles are my only way to go. If this kit has a single lens then it is a win for me 😁
Wish it were digital and had a gimbal for the camera. Still, good item for beginners! 👍👍
I'm now picturing tinyhawk that too heavy to get off the ground so it's just sliding around on the ground lmao
I just got the Tinyhawk3 to practice indoors, I'm trying to bind it to my E6 transmitter that I got from the Tinyhawk 2 Freestyle RTF kit but for whatever reason it will not bind. They are both FrSky D8 so it should work. Anyone any ideas or like a specific step-by-step guide? I'm new into this hobby and can't seem to find clear instructions on this on any emax guide, forum or so.
You’ll have to ask Emax for the binding steps. There is a certain way to put the drone in bind mode and a certain way to put the controller in bind mode. Once you have that then they should bind.
I did it. This old fart with too many drones just picked this up. Figured my decades of R/C airplane flying would help. This little guy is TOUGH!!! I'll get it though.
Every FPV pilot began at level zero. With practice it will come.
Can two head sets be used with one drone? I would like to give a tour to several people in real time with a drone. Will TIny Hawk III support that?
Yes. When you fly an Analog FPV drone there is no limit to the number of people that can tune into the signal.
Are there any more upcoming RTF kit videos? I'm loving them
Yes, two more.
Brilliant 👏
I have the same light in my dinning room,lmao
Which is better, the tinyhawk 3 or the tinygo 4k?
Question for you, Captain: Do most FPV radios allow for stick mode 3? As I lefty I've flown mode 3 since I began my drone journey.
I would think YES since most radios can be configured to any Mode both physically and in the radio settings.
Hiw do you record I press the record button once I'm done flying I take it out and then put the SD into an adapter and the adapter in my DVD player and it sais this devise is empty
If you don't see the RECORD red dot in your goggles then it probably is not recording which means you more than likely stuck an unreadable card in the unit like one that is WAY TOO BIG in size or formatted in a way that only your computer can read.
@@CAPTAINDRONE798 ok but how do you record maybe I'm doing something wrong
Please review polltar jt drone, its cheap but good camera and stabilizer, cheaper than mavic mini