PRACTICAL Hotrod! [Emisar D4SV2]
Vložit
- čas přidán 23. 07. 2024
- Bigger AND better, the Emisar D4SV2 is another awesome flashlight from Hank Wang. With four main emitters, 16 RGB auxiliaries, larger thermal mass, a throwier optic, and bigger batteries, this is more than just a hotrod, this is actually a pretty practical light for more serious usage. It offers everything I loved about the D4V2, and in my opinion it is far superior as an overall package.
This review covers three variants of the light: the standard D4SV2 with the FET+3+1 driver and Osram CSLPM1 (aka W2) LEDs, a dual-channel light with Osram CSLNM1 (W1) and Cree XPL-HD LEDs, and another tint-ramping light with Nichia 219b LEDs in 2700K and 4500K temps.
This review is a very positive one, simply because I love this flashlight. All three lights seen here were provided to me free of charge by both Hank Wang and Jackson Lee, though I was not otherwise paid for the video. All opinions ansd test results are my own.
Use the code "LUX5" at Jackson Lee's store for a discount! (not an affiliate code)
jlhawaii808.com/collections/e...
From Hank direct:
Single-Channel D4SV2:
intl-outdoor.com/emisar-d4sv2...
Dual-Channel D4SV2:
intl-outdoor.com/tint-ramping...
If you have any questions, feel free to leave them in the comments below.
For more info, check out
/ flashlight
/ hanklights
budgetlightforum.com/
If you enjoy Anduril and want to support the creator, consider joining
ToyKeeper's official Patreon: / toykeeper
You can also consider joining my own Patreon, though I'm basically just
going to steal your money: / luxwad
**************************************************************************
TIMESTAMPS:
INTRO: 00:00
Overview: 00:38
Output & Runtimes: 02:51
GRAPHS: 04:06
Drivers: 05:34
Beam Quality: 08:00
Build: 11:37
Battery Tubes: 12:35
Interface (Anduril): 14:13
Aux Lights: 15:06
Assessment 15:31
OUTRO: 18:35
Music used in this video:
"Rinse Repeat" - DivKid
"Wild Pogo" - Francis Preve
"Videomusik" - Mylar Melodies
"Zoom" - Video Tracks
"Commander Impulse" - DivKid
*****************************************************************************
Camera Gear:
Camera: BMPCC4K
www.bhphotovideo.com/c/produc...
Lenses:
Meike 25mm T2.2
www.bhphotovideo.com/c/produc...
Auto-Vivitar 35mm f/2.8
Auto Tele-Lentar 135mm f/2.8
Edited in Adobe Premiere Pro, After Effects, and Audition CC2022 - Věda a technologie
![DANGEROUSLY FUN - Emisar D4V2 [In-Depth Review]](http://i.ytimg.com/vi/Dk3Q1YYqU2c/mqdefault.jpg)
![DANGEROUSLY FUN - Emisar D4V2 [In-Depth Review]](/img/tr.png)
Sorry guys, I used the wrong discount code in the video - use the code "LUX5" to get a discount on your order at jlhawaii808.com
How many lumens do u think she'll make with the queens 26800 6800 mah battery?
About 4,500-5,000, it's a 20A cell
@@LuxWad I have the vapcell 32 amp 26650 now and it's crazy bright but doesn't seem to last that long.
I have the osram W2
@@LuxWad can u adjust the brightness of turbo like u can max ramp? I wouldn't want to but was just wondering
Thank you for joining the flashlight community. You bring a whole new level of production value to this hobby. Great content like this inspires others to step up their game. At least for me, it's making me think twice whenever I upload a video. For now, I'll keep doing my 1-shot, no edit phone videos, but when I have more time, I'll dust off Premiere and start learning After Effects.
Keep up the good work bro.
I'm happy to hear the videos are inspiring :)
As always very Good video LuxWad, you're my Favourite Flashlight CZcamsr! My D4S was my first real flashlight and now I'm waiting for a D4V2. Very good lights from Hank!
I love the work you put into these reviews! Top quailty! 🙂👌
Production quality of your recent videos are top notch! Content is always great as usual.
I want you to make all the videos. So good. Way beyond what anyone else in this community is putting out. Love it so much.
Nice timing. I just recieved my dual channel yesterday. You’re like the Nutnfancy of flashlight youtube vids. Good job man
Even though I'm not buying these, I will watch this from start to finish, twice. These videos are too good.
I love these formats, very enjoyable and high quality!
Thank you! Iv been itching for more flashlight content 🤘🏼
its been a while stranger! LOL very glad to see another video and extremely gad its of one of my favorite lights!
Just excellent. Thanks for putting this together. I have a dual channel D4sV2 with W1/219b mix. It’s fantastic. Next one will be a single channel XPL HI mix.
The quality of your videos is amazing! I'm also really biased too when it comes to Hank lights 👍
holy sh*t can you start a carreer in commercials already? your videos blow everything else with 2mil views out of the water.
Thanks! I still got a ways to go before my videos are commercial quality ;)
One of the Best Emisars review! Thanks!
I know I'm late to the party on this video (actually was watching your D4K video) but incredible review. Great job!
What a beautiful review! I've never signing in, just to praise a video before, hope you know how much I appreciate the effort you've gone to! I've been toying with buying my first Hank light, and the W1/219B combo is what I was considering.
I'm glad you liked the review!
I agree, the D4S is well-made and has a very practical design. The only things I can really criticize about it are the overall size and the lack of a clip. It's just slightly too big to carry around all the time, so I don't use it as much as smaller EDC-style lights. I use a KR4 a lot more, because it's smaller and has a fantastic clip. But I'd probably rank the D4S as a close second.
Outdoors with a coat on, however, is a different story. The D4S is _much_ better at that.
Hey, you are in luck now. Go get a D4K. 21700 and closer in size to D4V2
I currently have two of these with a third on the way, they are now my favourite lights.
Just bought one, Superb light as all the Emisars
Great vid as always. Thank You good sir!
Huzzah, it's here! This was awesome!
As a totally biased person who bought a D4SV2 W2 as my second flashlight (after my first, a KR4 E21A 2700K), it's a great, useful light. I tend to go on walks with my KR4 pocket-clipped to one glove for general soft walking ambiance that I don't have to hold, and the D4SV2 in my other hand for looking far out, visibility around cars (alongside a retroreflective high visibility vest), etc.
Given I care a lot about beam quality, I appreciate your comments on those aspects. I'm still tempted by a dual channel desire to simplify given how I use two flashlights on walks currently, but I think my wallet is safe.. for now.
sick video. i use my d4v2 daily at work and its super helpful being magnetic capped
Another great review. Man that 2 channel flood/throw looks perfect. And now 519a is available. A couple of those at 4500k with domes and w1 on the other channel may be a perfect light.
Yeah a W1/519a combo would be awesome.
This is a work of art
Again great quality in-depth video! IMO the 2-channel feature is a game-changer. Being able to have both a flooder and a thrower in one flashlight is amazing for anyone who actually uses these lights while on the move. Love my 219b + W1 DT8 for walking and hiking. The D4SV2 is intriguing, but size and weight make me hesitate.
It's cool but the output on either channel will be less than if you just had a light that did one thing or the other. I guess it depends on how much you need that flexibility
I do think the DT8 is the perfect platform for multi-channel lights, the 219b/W1 combo sounds awesome. For me though the D4SV2 is probably better single-channel. I think the upcoming DM1.12 will be a better use of the multi-channel design.
Damn good reviews man
I have a d4s in 26650 ,that has been my daily worklight for years now. Not fragile at all . Only issue that has shown up is 2 of the aux led have stopped working . I got six of hanks lights now. Love em
Great video. I'm glad you used the D4 for comparison. I wish you included the DT8 as well. It would be interesting to hear your thoughts on all three models considering they all have regulated and dual channel options now.
Having all three versions of the D4S for review must have been a dream come true.
I've read that people had issues with anodizing on their lights. Some even went all the way sanded the flashlights to achieve an apocalyptic look since the anodizing was wearing of. Does that happen sometimes because, as you mentioned, he outsources the parts?
You're right I should have compared the DT8 - in my own tests, it doesn't manage to sustain as high an output as the D4S. It's also much floodier, the W2 version in particular has a much less pleasant beam in my opinion.
The issues with the anodizing does come from the outsourcing, especially the color variations. The parts are ordered in batches which sometimes have slightly different coloration, so occasionally the lights can be mismatched
Hell yeah! Hank for life!
As a flashlight enthusiast it's a SHAME that I don't have this light already! 😆 I need to order one ASAP!
Jackson is the best man, I feel guilty that I don't have a Hank light yet, I think them not being ipx8 is the main reason, that and the shipping times, and I fell in a reylight rabbit hole, which is easy to do. Ah I'll get around to them eventually 😆🤙 those blasting w2s look amazing.
Полагаю, в скором времени, вдохновившись Вашими обзорами, джедаи модифицируют фонари Хэнка до световых мечей (Lightsaber)! 😄
May the Force be with you (с)
I can’t believe how good the w1 beam is out of that shallow optic
Waiting this light with new xhp50.3 HI option. Hope cree will release 3v version soon.
Is very visible that you don't like so much "stranger things" :D As always, popcorn, carbonara and for sweetness Nutella. You are so cool men
Cheers, Light-Veteran
Got to say, this is so far still my favorite light with the W2 emitters. Just a really nice compromise between flood and throw. Even comparing to an Astrolux EA01S (XHP50.2) -- all flood, no throw -- it doesn't feel as "constricted" as you might think yet still has significantly more throw.
Just wish I could put 21700s in there, as those are significantly easier and cheaper to come by.
Also, just for shenanigans, I'm seriously considering getting another with dual channel capabilities (or the D4K?) - SST20 deep red and W2 deep blue. And at that point, I'm thinking of perhaps modifying anduril with an extra blinky mode to allow strobe with alternating channels. Full on party light. ;)
The W2s are killer in this light, there's not much more one could want.
I do think the larger D4S is better for dual-channel lights with it's larger optics, but a dual-channel red/blue light would be really fun as an EDC ;)
They have so many options and the listing only shows like the CRI which is cool but I'd like to see more info on each
I went nuts and ordered a dual ch. SST20 2700K/LH351D 5700K (or 5500K in reality?) back in December. It's a weird combo but I just love the LH351Ds at 5700K. I 'd like sth floody and powerful enough this time. Would 4x 351Ds at 5500K be better than let's say 4x sw45?
Or maybe a dual channel 2700K-5500K LH351D?
Yes, the Samsung would be significantly brighter than the 219b. However if you've ever used the Nichias, their color is far better.
Eventually Hank will offer this light with Nichia 519a, which has the nice color of 219b and is very nearly as bright as LH351D
I had an original Emisar D4 miss it, but I did pick up a Wurrkos TS21 which has the same Anduril software...I just didn't wanna wait months to get another light, I'm sure I'll order another one one day but will wait till I know if I plan to move in the next couple months as I'd hate to order one and move before it arrives because they will take time unless you order from the guy here in the States but his options and choices are limited to what's in stock..So yeah if anyone interested in something similar order a Wurrkos TS21 or most Sofirn lights from Amazon
The highest capacity 26800 cell right now is 6.8Ah, right? If you get the D4SV2 with the 26800 body and W2 emitters along with the boost driver, that should put this in the same workhorse category as the Acebeam P18 and Fenix TK series.
So which emitter combination is best for both flood and throwy dual channel?
Was thinking of W1 & XPL-HD....
I really think W1 is the best for throw, while 519A is probably the best flood option now. XP-HD, LH351D are also great for flood.
Does it make sense to get a dual channel light with w1 and w2? Or should I just choose one or the other
I think you should get one or the other
I wonder how many lumens the W2 is with a shockli 20amp? 5500?
That seems about right
Dual Channel W1 / 219b sw45k is the greatest... I can confirm this without reservation. The single channel W2 is nearly as perfect, just a hair less versatile.
I also have a single channel 219b sw45k which is a beautiful light to carry when all I want is to just geek out on neutral, rosy floody goodness.
Great stuff, Sir!
enough power for comfortable lighting? I'm afraid that it won't be enough, that's why I want d18 on nichia
@@Kuznica_Veshiy_Les_Knife I'm not sure I understand your question. Each version is different so it depends on which one you mean AND it also depends on what you're trying to illuminate... a one-man tent - no problem! a football stadium - not quite as good.
I'm not a fan of rosy tint on my work lights that's why I use 4500k e21a. I would just go with 5k 351s on this light with a w1 channel. I'm sure 351s are brighter than 219b
Man this review doesn't make it easier to choose what to buy next.
I have a "first gen" D4SV2 with 4x sst-20 that i really love. Do you think it is feasible to ask habk to sell me a dual channel driver and W1 + LH351D MCPCB? My soldering skills are quiet good and i don't think i'm going to have a problem modding. If yes, what type if driver do i need for said combo?
I think Hank will be willing to send the components. That combo would take a 9A per channel driver.
If i want to stay single channel, how do you think 519a domed or 519a 5700K dedomed would compare to the 4xW2's as far as output. I have a D4v2 with 219b and i want a high CRI that's brighter/more practical overall but i dont know if id prefer the extra power of the w2s. I know the 519a will be brighter than the 219b but im scared it wont wow me like the w2's and not sure which experience I'd prefer.
4x 519as should get you about 4500 lumens, it may even push 5,000 in this light (*as start-up values, I would consider these to be 4k lumen lights on Turbo, and of course that will still drop.) Expect a sustained ~600 lumens at normal thermal limit (45C), probably 700+ at higher target temps.
The W2 will be more impressive, but the 519a is still awesome at night and the nicer color rendition is s huge bonus in my opinon.
I personally would stick with the domed emitters for higher output, but I prefer floodier lights. The dedomed emitters are very comparable in throw to the XP-L Hi
@@LuxWad thanks so much for the thorough reply! You're the best! I ended up ordering 2 D4sv2's with 26800 tubes. one with W2's and one 519a 5700k DD. I went dedomed bc i want it to be closer to 219b tint. I figured i could add a floodier optic if I want more flood. Without all of your amazing content, I don't know that I could've so willingly fell down the rabbit hole so quickly!
@LuxWad which of the three setup is your favorite by far? Do you prefer the single or dual channel? I asked you about the DM11 the other day but this D4S looks more awesome.
I like them all pretty well, though I prefer the single-channel style. I like the 219b light the most though.... I have a hard time recommending one in particular because they're all really great 😅
If you're looking to get just one, look at a dual-channel with W1 and 219b or LH351D. Hank will also have the Nichia 519a available soon, which is basically a batter LH351D. If you want a single-channel light, I think the W2 or the XP-L HI are really good
@@LuxWad thanks LuxWad. I actually prefer the single channel too. Currently I own the dual channels D4V2 e21a but I just tint it to a rosy color and just leave it like that. It’s beautiful but it does not have any wow factor due to its low lumen. Thus, now I will go for something out with a wow factor.
I think I will go with what you picked - the single channel W2. You seems to like it a lot. Hank offered a $12 Boost driver upgrade on that emitter. Would you recommend to get a Boost driver?
Not for wow factor, the boost driver has a lower output on Turbo. However that driver is more efficient, and is better if you actually want to use the light for extended periods of time
@@LuxWad thank you! Much appreciated your help. Now I understand more what the boost driver does I will definitely get it for the longer run time. Have a good weekend.
Your video quality is unparalleled... thank you for this. Can you put out a dedicated video covering the D4SV2 with the 26800 extension tube?
I just bought a single channel boost driver model with 519A, 2700k. I got the extension tube because I have a few extra batteries for my convoy L8.
I am an industrial maintenance technician and I bought it to EDC on my belt. I know it doesn't have a clip so unless someone has a holster suggestion I will probably have to make my own out of leather. I thought about incorporating a magnet and making the majority of the holster low profile instead of the traditional style covering the whole light for retention.
I would like to cover the 26800 tube but need to find time for it. I know some users have adapted clips from other lights to fit the D4S, I think the Olight Warrior 2s or seeker clips might fit. Check out r/flashlight on reddit for more info on that, people there can help you out
@LuxWad thank you for the response.
I really look forward to more of your videos. I like flashlights, but I mainly click on your videos because of the production quality and the way you explain features in an interesting way.
There is less on reddit than I expected on the D4sV2. But it has been helpful overall. I also looked at BLF and there's a lot of great info there.
@LuxWad if I only used one battery for this light and charged it every night to 4.2v, would it REALLY affect the lifetime of the battery? I mean by a lot? I like to have a fully charged cell every day in case of emergencies, but I've heard that it's best to charge them up to 3.7v
@parkermize If you left it at 4.2 every night, it would definitely see reduced capacity in about a year of use. I personally only charge fully if I'm expecting heavy usage, otherwise I keep my cells at 3.7v. It's not a big deal either way
@@LuxWad 👍
I found a QB 26800 Battery 3.7v high drain unprotected. That'll work right?
That's the only 26800 available right now, yes it works
Is there some sort of overview of the different FW ? How can i find out which FW my D4SV2 runns ? I can 100% confirm your Review. The 4x W2 Setup is the perfekt bike light for me.
If you press 15 times from off (15C), the light will blink out the firmware version as DD-MM-YYYY ####. The last 4-digit code is the model number, which tells you which build the light is running.
The list of model numbers and theuir respective builds is found here:
toykeeper.net/torches/fsm/anduril2/MODELS
The actual firmware builds can be downloaded here:
toykeeper.net/torches/fsm/anduril2/
@@LuxWad thanks !
To me 26650 just don't make sense when 21700 basically offer the same capacity in a nicer form factor. 26800 makes more sense for these but getting hold of a good cell can be a pain.
I can kind of agree, I think 21700 cells are superior in several ways. For me though it's the form factor of 26650 that I like most, I prefer the fatter tube and larger optic that comes as a result. 18650 compatability is nice too.
Hopefully 26800 becomes more widely available
Best reviews! At first I wanted d4s, but then I saw d18, Tell me, is d18 not planned?
18 nichia oh my god...
Eventually I plan to review the D18, but not soon. I am personally hoping that a D18V2 with Aux lights comes out.
I have this flashlight. I saw there's a tube that makes this into 26800. Do you know what charger could handle this size? I have the vapecell S4 plus it doesn't mention this size. Also I bought my light a year ago. Can you convert to a lighted button and raised ring easily? I knew you're the one to ask!!
You'll have to ask on Reddit, I don't know which chargers will work - I use the Olight universal magnetic charger. You cannot easily convert this light
@@LuxWad Found the sc1 plus works!!
How do we get the battery for the flashlights
I buy from 18650batterystore.com and Illumn.com
Do you recommend buying Hank's batteries? If there are better ones, can you please recommend the batteries? Thank you.
I don't believe Hank sells batteries. I recommend looking at 18650batterystore.com or illumn.com for batteries
I would definitely rock the shortie tube no matter how ridiculous lol.
It is pretty fun
I bought this light from Jackson today. Enjoyed the video quite a bit. If you don't mind my saying, it wouldn't be a bad idea to have a look at actual battery testing, especially for 26650s. The rewrapped batteries, which is all we have ATM, often have very misleading ratings. A 4200mAh 45A cell isn't terribly realistic, either, used in a light. I'd post some links, but I don't think that YT allows it. Good luck. There's a lot of good info on batteries out there. Mooch, for starters.
Thanks for the feedback! I'm glad you enjoyed the video. You can post links, I have to manually approve them sometimes though.
I actually do reference mooch and hkjs tests for my videos, but I don't go in depth because it's not super pertinent to the review. I also don't have the ability to test batteries, it might be worth getting into though at some point. I mostly just repeat the stated cd from the cells I use but it might be better to just avoid that altogether and focus on the actauly result in lumens
you should consider trying to review some skilhunt lights, like the m200
I definitely want to review the M200, and even compare it against the S2R Baton, I think that would be fun. I just don't know when I will be able to get to it, and so far Skilhunt doesn't want to send me anything
Is the linear driver the same thing as the boost driver now offered, or is it something different?
It's totally different, the boost driver increases the voltage to 6V, which is a much more efficient process that allows for higher sustained output and longer runtimes. However, it's only half as bright as the linear+FET driver can be.
I have a video coming out soon that compares the two directly.
@@LuxWad Is the linear + FET the driver that comes with the stock W2 single channel setup, and if not, can it be requested? What's the advantage over the stock single channel setup? Thanks
@@ayokay123 You can request the newer linear driver. The stock D4SV2 comes with the FET+3+1 Driver, which is a bit less efficient at the higher levels but the main difference is really just the button light.
@@LuxWad I couldn't care less about the button light, but if the linear driver is more efficient, that sounds like the way to go.....unless there's a penalty in some other area. Btw, I love your reviews!
Darnit... Now you've got me doubting if I should get my D4Sv2 in the same config as my D4V2 (2-channel, LH351D+W1) or if I should just get 4xW2... 🤔😵💫🤯
It's a hard choice... I might go for the 4xW2 just because you don't already have it ;)
@@LuxWad IKR! That's what I was thinking. I'm also considering getting another D4v2, but with 4xXPL HI 4000K... Decisions, decisions... 🤪
@@IsraelMagalitI have the original D4 w/4 xpl hi 4000k and it is a beast!
Great review! I tried the discount code from your description on Jackson's site and it didn't work
Thanks for letting me know
@@LuxWad No problem
@@michaelz33 Okay so that was my fault, the code is actually "LUX5", it should work. If you happened to have already ordered light, message Jackson and he'll refund you the discount amount.
@@LuxWad No problem. I didn't order a light, but thanks for the info.
I tried to buy one but to get this light into canada would cost around $180 for the light + battery. Quite disappointed by the sipping price
Great review, when D4w ?
I'm not currently planning for it, since it's just a d4v2 with a right angle
Finally, my 1st 26800 light! Also, can't wait for Hank to stock on Lume1 Drivers.
Oh and.. AUX lights, please.. begone! Just move them under the switch for something actually USEFUL.. (and avoid blinding yourself while playing rainbows.. 😒)
but they're SO PRETTY
Just ordered 2 of my first Hank lights the noctigon k9.3 and the d4sv2 after watching this video im guessing neither one are coming with batteries what should i order?
If you're in the US, go to 1860batterystore.com or illumn.com and get a flat-top unprotected 21700 and 26650 of your choice
@@LuxWad thank you very much for the reply
@@LuxWad I need a charger as well? Can you use a protected battery?I’ve never used a unprotected battery
@@NHWilderness Get the XTAR VC4SL that I reviewed on the channel. You cannot use a protected cell
4:37 gamers nexus style time bars? Appreciated!
Haha glad you liked that, I'm a big fan of GN
Waiting for this light to come in the mail. I’m to exited lol 😂 and it’s taking forever.
The wait is a killer
13:58 - INR. Manufactures spelling error?
Kodos to Jackson!
Nice, I'm the first to comment!
Congrats
I just dont get it why you dont have more subs.. The Quality on your Newe Videos is Flawless! WOW!
Maybe the Flashlight Thema is too heavy and overlooked. Theres Flashaholics... and theres the Rest that uses 5€ crappy flashlights whole Life.
More than anything it's probably my infrequent and inconsistent uploads which CZcams does not like. The videos are also for a pretty niche audience like you said, most people are not aware of more than the most basic flashlights.
I'm glad you enjoyed the review!
@@LuxWad yeah pretty sad but filling this niche is important for some. Glad we have one dude thats good in it and is willing to sacrifice himself 😛
Im not the guy that likes alot of videos. But these ones are so nice made and you literally see the effort that sticks in it.. think i liked everyone i watched of them.. and also think im already throu them all. 💪🏻🤓 Amazing Image Quality, Emitter details and stuff 👌🏻
I still don't understand what all the different model variation numbers mean.
How do i even begin to pick what to buy?
Way too confusing for your average consumer.
Which model numbers?
@@LuxWad
D4SV2 and D11
@@jayytee8062 They're actually pretty simple. The D-line are swide-switch lights, and the number is the number of emitters - D4 has 4 emitters, D1 has a single emitter, DT8 has 8 emitters. The "S" stands for Super, so this is the D4 Super - or the fatter, throwier version of the light. The V2 is just the second version of the light.
I have videos with most of the different Noctigon/Emisar lights that can help show the differences.
@@LuxWad
Thanks for the help.
Yes, BUT Vin's SBT90.2 model.... :)
That light is pretty amazing. I believe Hank is now selling the KR1 with an SBT90.2 as well
@@LuxWad Couldn't find it anywhere.
@@ayokay123 It's under the LED options on the KR1 page. It adds an extra $50
@@LuxWad Found it. Thanks! Now I have to figure out if Vinh's mods are worth an extra $30. All these lights are amazing. Would be curious to see an SBT90.2 in this D4S. Am surprised Hank doesn't offer it.
Like
these look... remarkably similar to Zebralights
Hank "Wong"
5
i got like 3min into the video and you still didnt show what the light looks like shined on the ground, like how?
Watch the rest of it
d4k is out
Yeah I'll be comparing it to the Fireflies PL09 quad when I get it
All tech and no practical use no beam distance shots no throw measurements sounds more a auctioneer sorry your are of my list.
I provided lots of throw measurements, I just don't use the ANSI-FL1 "throw" in meters because it means nothing. Candela is a much better metric since it's a measure of actual intensity.