You F'd Up: How To Reassemble a Glock

If you have any recommendations for future videos leave those below! Also, don't forget to hit that subscribe button and checkout our website for all your firearm needs.
MGW
www.midwestgunworks.com
0:00- Intro
1:10- Going over a Glock handgun
2:44- The slide
4:32- Trigger Mechanism Housing
6:41- Slide Release and Locking Block
7:13- Pins
8:57- Final assembly and testing
9:53- Outro
All information provided is merely for entertainment and informational purposes. Should you decide to act upon any information provided, you do so at your own risk. Midwest Gun Works does not accept any liability for any mistakes, errors, or faults that may occur. Refer to the manufacturer for specifications of the products used. It is recommended that all modifications or repairs be done by a qualified Gunsmith.

[@HWill-iq9sl]

Fantastic demonstration video

[@AnantaAndroscoggin]

Had a classmate at GM/A school try to put the breechblock to a .50 BMG Mk2 HB back into the receiver both on its side, but wrong-end-to as well. None of the instructors seemed to have seen anybody do that before.
A couple years later, heard a story about a Bosun's Mate at a station that didn't have any Gunner's Mates, read the words "oil buffer" on that part of a .50, and decided to fill it with oil. Needless to say, his machine gun didn't work after that.

[@marksd5650]

Should be of great value to many people. Some of the parts just look black with no definition. If you have a moment take a look at what Sig Guy and MCARBO are doing, which is exactly what you’re doing. They have perfected this close up, well lite reassembly video, in the case of Sig Guy it’s only for Sigs, which is why yours will be invaluable for other makes. Best regards.