Falling my Biggest Tree's Yet with the New JonCutter G5800 Chainsaw
Vložit
- čas přidán 3. 11. 2019
- I take down a monster 32" Aspen Tree with the new JonCutter G5800 Chainsaw, and it cuts thru it like butter.
I'm waiting for the Cabin Foundation materials, so I use my free time clearing the last few big tree's that need to come down before I start building.
If you enjoy the video, hit the Like button and make sure to Subscribe!
Thanks
Just a kind suggestion. Looks like the fell cut on second tree went too low. Fell cut should be made inch or two above where the notch cuts meet. That way holding wood bends before it starts to break and it steers the tree longer. Also safer leave more holding wood and use wedges to fell the tree.
Alright, be safe.
Thanks for the suggestions, I appreciate it.
I've been hearing so many positive things about these saws that I ordered a G5800 a week ago, and am waiting for for it to show up here in WI so I can compare it to my other saws.
I've had the G5800 for 3 months so far, and I just got back from another week of putting it to work and it is still performing flawlessly. For the power/weight of the saw it seems like it is going to be a great firewood saw. I hope yours works aswell as mine!
Mines on board the big bird now crossing over the pond inbound for JFK. It will go well with it's little brother the Jon Cutter G2500. I'm impressed with the power and what the G5800 can do. I probably would of used my Stihl, 45AV with the 36" bar on that big one but you got it done! Great job and video and good luck with your new cabin and home site! :)
Nice job 👍
I've had the 5800 for a couple of months now. Filled my ranger and 3/4 ton with wood. It runs good. I switched up chain to .325 with 18" bar. I have bigger saws and wanted a medium one. With a sharp chain it worth the price. Easy price. I did order a new cover along with the paper pleated filter. The filter it comes with doesnt keep the dust out. The new paper one seems to be to be working great so far. Time will tell.
Im still liking mine, I'll have to see how it holds up on next year's firewood supply
Can you drop a link for the updated filter bro?
Thanks
Right between the two spruce trees nice job!!
I guess the wind helped ya out there lol..sometimes I use a small stick in the curf while cutting too keep it from coming back.
Thanks, every tree I cut I get a little better at getting it drop where I was wanting it to. I need to remember to always bring my wedges with me, especially on the bigger trees. Thanks for watching!
I wish farmer tec would add more parts for these on their website i think alot of.people would swap over if they had parts more available
I noticed there shipping prices have increased like crazy aswell.
@@OffGridFreedom indeed i paid 75$ for the ms 260 clone they just dropped
They want $161 shipping to ship a new chainsaw to me. I dont remember being that much when I ordered the joncutter.
@@OffGridFreedom talk to lucas belfielt at just send it saws hes a dealer his stuff is gone through and offers warranty for maybe 40$ more than ordering from farmer tec
I just purchased the g2500 and can’t wait for it to arrive. May consider one of these if my MS311 ever dies on me. Your low idle sounds a bit too high, no? Top end sounds great though and seems to pull the chain nicely.
My brother has the g2500 and he likes it, its great to carry around on the atv. Ever since I switched from 25:1 to 40:1 I havent got the carb adjusted right, Ive made a few minor adjustments, I'll try the low idle.
What size bar are you using? It looks like it's pulling that chain pretty good.
I'm running a 20" bar, I'm considering moving up to a 22" as it seems like its got enough power to run a bigger one.
g 5800 take 095 mount go to ebay ckeck out efco 20 inch bar made by oregon for efco chainsaws these are oregon powercut bar fit the g5800 perfectly 3/8 058 guage. also they are true 20 inch bars measures true 20 inches plus from chain cover to tip the 20 in joncutter bar is really only an 18 in. also the oregon efco bars are only $35.00 and free shipping last i looked the guy had 10 left . just type in 095 guide bars and you will find this is a very popular bar.
Thanks so much for that info, I will go check it out on ebay.
@@OffGridFreedom Yeah especially with a muffler retune mod.
@@garyvisintin8431 Wish I would have known that last night lol
Thanks man!!