ABANDONED POLO TDI PART-3 | RESTORATION

Sdílet
Vložit
  • čas přidán 4. 10. 2023
  • came across this vehicle which was abandoned and parked inside a open space for more than 2 years . Bought this polo as a restoration project , so that i can work on it and put this vehicle back on road .
  • Auta a dopravní prostředky

Komentáře • 59

  • @sasikanth1091
    @sasikanth1091 Před 9 měsíci +3

    Much waited video, congratulations 🎉 you gave life to abounded polo much life, saving diesel cars!
    Huge appreciation and more power to you Vikrant 😊

  • @ravindradaundkar9905
    @ravindradaundkar9905 Před 9 měsíci +2

    Congrats for an amazing car. You'll enjoy it more as its a DIY.

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci +2

      Wish i could 🤣 , my friend bought it from me 6 days ago .

  • @jinurajkr
    @jinurajkr Před 9 měsíci +1

    Ur videos are always amazing .. thanks folk

  • @NiharPanchal-ni7vn
    @NiharPanchal-ni7vn Před 9 měsíci +1

    Proper technical information...!!!! feels connected while watching this type of information.
    i request you if you can add the total cost of the whole project.

  • @m2techrktm91
    @m2techrktm91 Před měsícem +1

    ❤❤❤❤❤❤❤

  • @HUNTERGAMING-zi7os
    @HUNTERGAMING-zi7os Před 9 měsíci +1

    Excellent 👌

  • @gurukarthikjm9632
    @gurukarthikjm9632 Před 9 měsíci +1

    Sir one small doubt in my skoda rapid
    Engine oil is seen in air filter hose and hessing sound is coming what may be the reason for that and there is no low pickup getting good mileage also but im afraid of turbo because its a costly part so there is any solution for that or how to check that from where the hessing sound is coming

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      A little bit of oil in the air air path comes from the CCV system and that's normal .
      Hissing sound is always there from turbo , but when our air conditioning system's outside air flap gets covered in dust , it doesn't seal properly so now noise from the engine bay can enter the cabin .

  • @prasanthvijay2413
    @prasanthvijay2413 Před 9 měsíci

    Bro i have done car service recently.. and i drove around 800 kms only. Now i m getting some sounds whenever i m doing some u turns or some extreme. Recently only steering repair work has done and it was around 13k with other service with a total cost around 70k.
    Do you have any idea why i m getting this sound.
    And one more issue is my dim light, some times it is working and sometimes it is not working. But bright is fine.
    Please help me and give me some idea.
    I m having Volkswagen vento 2012 Diesel TDI
    I m from tamil nadu

  • @sandeepsharma-rc7sy
    @sandeepsharma-rc7sy Před 6 měsíci

    Bhaiya apoko VW parts ka knowledge hai to please thoda help karo, Kya boodmo se OEM VW part lena thik hoga, Mai Delhi me hu to delivery ki problem to nahi aati but only want to ensure about authenticity.

    • @yourDIYneeds
      @yourDIYneeds  Před 6 měsíci

      Hanji sir , most of time parts thek hi hote hai

  • @ishantyagi6951
    @ishantyagi6951 Před 7 měsíci

    Bhai g mere 2022 model honda city hai uske thodi ground clearance up karne ke liye gutke lagwau ya buffer. Please bataye

    • @yourDIYneeds
      @yourDIYneeds  Před 6 měsíci

      Sir it can be done , but it will affect the ride and handling

    • @ishantyagi6951
      @ishantyagi6951 Před 6 měsíci

      @@yourDIYneeds buffer aur gutka mai se kya tk h?

    • @yourDIYneeds
      @yourDIYneeds  Před 6 měsíci

      Sir dono ek hi chej hai

    • @ishantyagi6951
      @ishantyagi6951 Před 6 měsíci +1

      @@yourDIYneeds thanks brother

  • @karthihs
    @karthihs Před 9 měsíci

    Hi Sir, In Polo TDI, smoke from the oil cap is normal when engine is running?

  • @vinterone22
    @vinterone22 Před 9 měsíci

    Perfect. I own a polo tdi, serviced and replaced the injectors, did the minimum deviation yet i can hear the injectors knocking. Any idea why that is happening?

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      Sir you got your injectors serviced ?
      In the process of service they disassemble the injectors completely , as a result the tolerances change , so injectors start to make noise .

    • @vinterone22
      @vinterone22 Před 9 měsíci

      @@yourDIYneeds i got them serviced..all 4 of them. Last night cylinder 4 injector failed..now i ll have to replace them..what do you recommend, new one or get a used one?

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      @vinterone22 sir go to a car scrap dealer and get 4 injectors , pulled out from an complete engine in front of you , thats the best

    • @vinterone22
      @vinterone22 Před 9 měsíci +1

      Alright, appreciate it..

  • @ankitpal9761
    @ankitpal9761 Před 6 měsíci

    I have Storme 2015 88k driven .... Usme cold weather m temperatures neeche jaata rehta h.. Mne OEM thermostat valve lgwa liya...
    Agr truck walo ki trah radiator ki front air blocked kr deta hu toa sab OK rehta h
    1 - agr temperature sensor error hota toa heater kaam krta... Plz help me 🙏

  • @hmmmmmm8440
    @hmmmmmm8440 Před 9 měsíci

    Sir agar tata safari dicor ka egr vaccum modulator kharab ho jaye to pickup drop ki problem hoti hai kya?

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      Ji sir , agar egr kaam nahi kar raha , ya blocked hai to pickup or fuel efficiency dono ka issue aa sakta hai

    • @hmmmmmm8440
      @hmmmmmm8440 Před 9 měsíci +1

      ​@@yourDIYneedsThank you sir

  • @kailash.fattruth
    @kailash.fattruth Před 9 měsíci

    Bro you can actually do minimum quantity adaptation in obdeleven!??
    Does it need security code and how long did this process take?

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      Yes its possible ,
      It doesn't require security code for that
      And it can take up to 40-45 mins

    • @kailash.fattruth
      @kailash.fattruth Před 9 měsíci

      Bro what do you advise obdeleven or vcds? And is obdeleven like a subscription or free to use like vcds?

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      @kailash.fattruth
      Sir you can use the basic functions of obdeleven for free but if you want access to a lot of data then you have to pay an annual premium , on other hand VCDS is one time investment but its not that great to use on smart phone , obdeleven is much more user friendly
      So ultimately its gonna be your decision
      Obdeleven device is close to 8000 and VCDS is close to 30k

  • @rudrakshatayde2824
    @rudrakshatayde2824 Před 9 měsíci +1

    Sir safari dicor bech di kyy

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci +1

      Sir delhi me chala nahi sakta tha , islea ab cousin ke paas hai .

    • @rudrakshatayde2824
      @rudrakshatayde2824 Před 9 měsíci +1

      @@yourDIYneeds sir storme Lelo ek Bina safari ke ghr suna lgta hai

  • @sunilkumarsamal919
    @sunilkumarsamal919 Před měsícem

    Which obd tool you sre using for scanning?

  • @pruthviraj1826
    @pruthviraj1826 Před 8 měsíci

    I have vento 1.6 tdi 2011 model, its having an issue of rmp automatically goes to 1000 rmp for few minutes but this happens often while in idle. so what might be the issue.

    • @yourDIYneeds
      @yourDIYneeds  Před 8 měsíci

      Sir engine adjusts the rpm as per the demand by energy management system ,
      In following situations
      1- to increase the flow of coolant in case of high ambient temperature
      2 . When battery voltage is low , engine speed increases to increase the voltage from the alternator to charge the battery faster .
      3 . High electrical load
      4 . High air conditioning load
      5 . High altitude which means thinner air
      Its completely normal ( if its not permanent)

    • @pruthviraj1826
      @pruthviraj1826 Před 8 měsíci

      @@yourDIYneeds Thank you sir. Yes it doesnt stay at 1000rmp normally it will be around 800 rpm, but automatically without me touching the accelerator the rpm goes to 1000. but this happens daily, when im standing in signal and even when car is on the go when i press the clutch it should come to normal idling speed know, but stays at 1000rpm for few mins.
      sir, can i get your contact number.

    • @yourDIYneeds
      @yourDIYneeds  Před 8 měsíci

      @pruthviraj1826 sir mail me at everydaydiyhelp@gmail.com
      I will share

  • @ratanbondre8691
    @ratanbondre8691 Před 9 měsíci

    Is it possible to retrofit cruise control on vento 2012 model. What is procedure and requirements plz make video on that

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      Sir very first thing is to swap the BCM which supports the cruise control system then we have wire 4 new wires to the 4 cruise control pins on BCM and then have to replace the current steering stock control with the stock control which has cruise control buttons on it , then have to activate the system with either VCDS or OBD eleven

    • @maheshbondre2313
      @maheshbondre2313 Před 9 měsíci

      ​@@yourDIYneedssir Does BCM 87 support CC? in India where I can get steering stalk with cc buttons? What is obdelevem cost and where to buy?

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      @maheshbondre2313
      Sir it's not about part no. Ending with 87 , i don't know why people think that way .
      Its all about hardware no.
      Like part 87f has variation where one has CC but the other one doesn't
      Like we need hardware version 46 of 87F for
      For CC but hardware version 32 of 87f doesn't have any pins for CC so it doesn't support.
      Drop me a mail on everydaydiyhelp@gmail.com , i can send you reference images for more clarity

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      And steering stock can be arranged here in delhi , and obdeleven and VCDS both needs to be sourced from their official website , if you need VCDS then i can help , i know the india region dealer of VCDS devices

  • @shashankrai8144
    @shashankrai8144 Před 8 měsíci

    Bhaiya meri vento mein reverse light nahi jal Rahi hai maine switch bhi change Kara liya fhir bhi nahi jal Rahi hai lekin jab haath se us switch ko press karte hai tab toh jal Rahi hai lekin jaise hi gear box mein kas dete hai fhir nahi jalti hai kya Karu batao please

    • @yourDIYneeds
      @yourDIYneeds  Před 8 měsíci

      Chassis-engine ka ground check karo , maybe continuity ka issue hai

    • @shashankrai8144
      @shashankrai8144 Před 8 měsíci

      @@yourDIYneeds bhaiya ungli se switch ko press kar raha hu toh reverse light jal Rahi hai lekin jaise hi mein gear box mein kas deta hu fhir reverse gear dalta hu toh light nahi jalti

    • @yourDIYneeds
      @yourDIYneeds  Před 8 měsíci +1

      gear box ke andar se contact nahi ho raha sensor ka . Ek bar wo dekh lo

    • @shashankrai8144
      @shashankrai8144 Před 8 měsíci

      @@yourDIYneeds ok

  • @bhagya_wav
    @bhagya_wav Před 9 měsíci

    Hey there! I need your help with a weird issue which even VW guys can’t understand. I have a vento 1.6tdi. Last year i got the cooling coil and central vents position actuator replaced. Since then my AC works fine and fan works fine too but after 2-2.5 hours of drive with ac on, the air flap (located in the fan box which controls whether air should go to the vents or not) closes automatically. And sometimes opens up too automatically after 15-20 minutes. But otherwise i end up shutting the car down for 40-50 minutes then only the vent opens up. Fan works normally even after the flap turns to the off position . Please help me out.

    • @yourDIYneeds
      @yourDIYneeds  Před 9 měsíci

      Sir either its a faulty climate control unit or maybe too much of dust and moisture accumulation inside the climate control unit , which is messing with the system , you can get it removed and get it cleaned with a electronic contact cleaner, easily available on online stores

  • @mallikarjunreddy4974
    @mallikarjunreddy4974 Před 8 měsíci

    Bhaiya please share me your contact if possible..if not please share instagram.. i own a mk1 diesel octavia and encountering some issues. Please reply!

    • @yourDIYneeds
      @yourDIYneeds  Před 8 měsíci

      Sir mail me on everydaydiyhelp@gmail.com i will share the contact details