Why We're Putting A 4r70w Transmission In A Classic First Gen Mustang
Vložit
- čas přidán 27. 04. 2024
- Transforming A Classic: Upgrading To A 4r70w Transmission In Our First Gen Mustang! Why We Chose To Install A 4r70w Transmission In Our Classic Mustang. We Talk parts for our 1967 Mustang that will be getting a 4R70W transmission. What we will be using will work for a 1968 Mustang 1969 Mustang 1970 Mustang 1967 Cougar 1968 Cougar 1969 Cougar 1970Cougar.
Episode 648 Autorestomod
Parts:
Premium Transmission Mount Isolator
www.npdlink.com/product/insul...
Crossmemeber AOD Conversion: 6A023-13B
www.npdlink.com/product/cross...
Jford@autorestomod.com
Insta: @autorestomod
www.patreon.com/gasolinemedia
Sponsors:
www.npdlink.com
Insta: @npd_nationalpartsdepot
www.eatondetroitspring.com
Insta: eatondetroitspring
Facebook: / eatondetroitspring
www.rrsusa.com
Insta: @rrs.usa
Facebook RRS USA - Auta a dopravní prostředky
I put a 4r70w in my 68 mustang convertible with a US Shift controller. It was a game changer, especially having full control over all the parameters.
I put one in a 64 econoline truck with a 347 and US shift controller. Worked great.
where did you buy or transmission? Was looking at Monster transmissions.
I have a 2003 v6 mustang 4r70w in my 70 mustang. First off you have to cut those ears off. Second if the plan to use the stock shifter you have to get a lokar ata 1008 shift arm and a universal th400 shift arm kit with heim joints and your good to go! Third, if you want to use the smaller aod yoke, you have to use a aod tail shift!
I love my 4R70W in my 75 Torino.I rebuilt it myself pretty easy to do.And I'm using US shift quick 2 it's all I need works great. My transmission is out of a 98 5.0 Explorer 2x4.And I used a 98 explorer mini starter.
2001F150 4.2l 4r70w. In my 70 torino. Fits like a glove
Glad to see you doing this (again). I used your previous videos on installing the 4R70W in the wagon in prep for my install last month where I put a 4R70W (from a V6 2000 Mustang which has the same small block bellhousing pattern) behind a 408w in my '70. Unfortunately, I did run into interference issues with a couple of the ears on the case, which I discovered after getting the trans installed. One was on the top of the rear passenger side of the main case, which interfered with the tunnel. The other was an ear on the passenger side of the bellhousing that interfered with the headers I'm using. Fortunately, I was able to hack both those off without issue with the trans in the car by removing the rear mount and lowering the trans a couple inches to gain extra access. I ran into no interference at the firewall or with any of the rest of the bellhousing or trans housing. Also, because the 4R70W is 1" longer, I had to space the aftermarket AOD/T5 crossmember I used (American Powertrain part #XFFO-10101) back about 1/2". The crossmember you're using appears to have a bit more adjustment for where the mount sits, so hopefully that shouldn't be an issue for you guys. Looking forward to seeing how this project goes for you guys.
Great info. This is one of those videos that will become a reference for anyone doing one of these swaps.
Thank you this was a very informative video. 👍👍👍
Love your videos. Thanks for what you do. I'm planning this same install on my 70 Mach1. So I'll be following this series closely.
You may even be able to use a core from behind the 4.2 V6 "Essex" from an F150/E150 - they stuck with the Windsor patterns. And there's a bunch more of these in junkyards, most of them 2wd units.
I’m putting a AOD in my 70 Mach 1. Hopefully this year. I’d like to see a video of what you ran into on install.
Some helpful i.d. info is the 4R70W transmission that fits the 302/5.0 engine has 2 starter bolt holes, the 4.6/Mod motor trans has 3 starter bolt holes.
Real shop guys
Monster trans makes 3 different stages of AOD- Had mine for 5 years-works perfect and no need for costly comp controller and no wiring rats nest either !!!
I just finished installing a 4R70W into a 66 mustang. I found that my transmission had a larger slip yoke than AOD. I used a spicer 2-3-14061X which fixed the looseness and leaking
Dang, I want to put one behind my 51 Ford flathead...
I would contact Lintech transmissions in Canada to see if they have an application or a bellhousing to put that behind a flathead.
Any links to an aod install in a 68 stang? Would love to do that with 4r70w guts.
So I believe you got those two transmissions backwards. The aod is the one in front of you. 470 w the one over there for the wires hooked to it
You may be right
I’m in the process of putting in a 2002 4r70w 3.8 trans in my 64 Fairlane controlled by us shift
Us shift 4 was 2000$ cad shipped to Canada
@@Chris-up2ro Wowch! $2k Canadian?!?!!! I'm guessing import taxes added a bunch, but I hope you got more than just the Quick4 for that price. I just ordered in March and it was $1070 USD ($1460-ish CAD) shipped, with tax, including the Quick4, TPS5 kit, valvebody reprogramming kit, a couple Sonnax valve upgrades, and a filter.
@thewyattfletcher rule of thumb for Canadian car enthusiasts: take the $US basicprice and double it... that will be the price in can $ to my door in Canada
@@hydraulics ugghhhhh... That sucks!
Did you get the bugs out of the 69 wagon?
I got mine out of a v6 mustang
I have a 4R75W that supposedly came out of a 2004 Mustang GT. Will this work for a 1st Gen '65 Stang too?
If it modular engine the bellhausing is not the same as the 302/ 351W small block.
AOD's for V6 cars had fewer clutches in the transmission (and will be less durable behind a high power motor). Since the "70" in 4R70W is supposed to indicate the torque capacity of the transmission (700ft. lbs), maybe the 4R70W behind the V6 isn't built for less power?
ill stick to ym c4 this is to much trouble, for something i cant run a high stall converter with!
Talking transmissions.....I have a 67 stock 289 C code. With a C4. I was changing the main and rod bearings. And noticed my #3 thrust bearing was cutting into the crank. So I went to have it checked and was told the torque converter was swollen causing the crank to push forward causing the crank issue. Ever run into this? Or is this an excuse to pass the buck to the next guy?
I believe the 3.8 V6 in the SN95 mustangs have the Windsor bolt patter also, so you can source one from them as well.
why not just use a c6 or fmx transmission?
Sorry. These cars are about KIS. Too many wires and electrical gizmos that are not worth it ... for me
In some respects I agree with you on that. But boy I really like driving my car with a 4r70w in it. Honestly I don't even miss not having a bigger gear outback on the wagon.