Things to Know About putting a 4R70W in a Mustang
Vložit
- čas přidán 18. 05. 2024
- 4r70w Installation Tips For Mustang Owners. Must-know Tips For Installing A 4r70w Transmission In Your Mustang! Mustang Mods: Everything You Need To Know About Installing A 4r70w Transmission!
Episode 651 Autorestomod
Parts:
Premium Transmission Mount Isoliator
www.npdlink.com/product/insul...
Crossmemeber AOD Conversion: 6A023-13B
www.npdlink.com/product/cross...
Jford@autorestomod.com
Insta: @autorestomod
www.patreon.com/gasolinemedia
Sponsors:
www.npdlink.com
Insta: @npd_nationalpartsdepot
www.eatondetroitspring.com
Insta: eatondetroitspring
Facebook: / eatondetroitspring
www.rrsusa.com
Insta: @rrs.usa
Facebook RRS USA - Auta a dopravní prostředky
8:16 - Hats of to you, Cam! No way I could have saved the shot by not cursing and behaving badly.
You kept yourself level headed and professional!!! It probably also save Jeff and team a few minutes of editing too.
It was great 😃 seeing Cam working in the tunnel !!!
Those ARP bolts sound scary, with that torque to yield torquing technique.!!! Thanks for the details up till now. I'll be watching for the next installment..
Take care gents....
Love the detail on the engine, nicely done!
I'm just here for the corny dad jokes....😆
Good video Jeff. When Cam clicked into his professorial mode (always informative) @around 17:00, he talked about a gap between the flex plate and the torque converter. What is this spec called and how would you measure it? Considering the importance he placed on this gap, perhaps it is worthy of a short episode just to further explain that?
I was always told to use a ratchet and not the torque wrench to snug the bolts as it can unduly stress the torque wrench.
You have to drop the transmission crossmember to get to the top bolts on the bellhousing on my 68 Fairlane with the C6 as well.
LOVED THE CHICKEN 😅
Mmmmmchiiiicken.
When Cam starts whispering, it gets serious.
Great video! Would you please be able to share the torque converter part number. Regarding the yoke, according to my research the Spicer 2-3-14061X will work as it's 1.597".
can you do a show based around the Boss 302 chassis book as applied to the various generations.
Wouldn't they need a Boss 302 to do that?
So I can't drive my 1977 Tbird without a sfi flexplate ? I don't think the 400 has ever crossed 3000rpm .
Make a stand from the flex plate.
Don't you absolutely hate torque converter studs? The bolt in is so much easier.
Hello Sir!Awesome one hell of a job as usual.Where could I talk to you privately for some infos?On Instagram?Or messenger?Have a nice day.