Get Started with ESP32: Lesson 01 - Setting Up the Development Environment

This video is a dedicated ESP32 course for beginners, utilizing the Elecrow CrowPanel ESP32 Display board, guiding you from setting up your ESP32 development environment to completing all the exciting projects on the Arduino IDE.
⭐ Get Elecrow CrowPanel ESP32 HMI Display Series here 👇
www.elecrow.com/display/esp-h...
⭐ Course File 👇
github.com/Elecrow-RD/CrowPan...
For any technical inquiries or assistance, please feel free to reach out to us at [e-mail]. We are here to help and will respond to your request promptly.
📌Let's subscribe and follow us to keep updated with the latest news and perks:
Facebook: / elecrow.openhardware
Twitter: / elecrow1
Instagram: / elecrow_official
Linkedin: / elecrow-limited
Tiktok: / elecrow
#CrowPanel #ESP32 #Elecrow

[@tomcatmeow69]

where is the link to the json, i don't see it under the video anywhere and I went to wiki, might as well drop me in the middle of the Gobi dessert looking for water.

[@Elecrow]

Hi, the video kindly informs viewers that the link to the course file can be found in its introduction. For the JSON link, you may locate it within the course files, or alternatively, follow the video's guidance to find it directly in the ESP32 guidance document. 😊😊

[@TinTalon]

I know it seems slow but I do enjoy the way this is explained and shown. Waiting on my 7” crowpanel to get in before I continue. I look forward to this lesson plan. Thank you

[@Elecrow]

We're thrilled it'll be of great help to you.

[@huseyinyuzubenli7522]

hello While trying to upload the code, the error message is as follows: Failed uploading: uploading error: exit status 2
And it also stays connected to the card.

[@Elecrow]

Hi, before uploading the code, you need to put the board into the download mode. First, press and hold the boot button, then press the reset button, and finally release them.😊

[@RRRR-lr1hh]

I've got an error while uploading a sketch on my 5inch board.
A fatal error occurred: Unable to verify flash chip connection (No serial data received.).
Failed uploading: uploading error: exit status 2

[@Elecrow]

Hi, before uploading the code, you need to put the board into the download mode. First, press and hold the boot button, then press the reset button, and finally release them.😊