Get Started with ESP32: Lesson 10-Data Exchange Between CrowPanel and Arduino | Serial Communication

This video is a dedicated ESP32 course for beginners, utilizing the Elecrow CrowPanel ESP32 Display board, guiding you from setting up your ESP32 development environment to completing all the exciting projects on the Arduino IDE.
⭐ Get Elecrow CrowPanel ESP32 HMI Display Series here 👇
www.elecrow.com/display/esp-h...
⭐ Course File 👇
github.com/Elecrow-RD/CrowPan...
For any technical inquiries or assistance, please feel free to reach out to us at [e-mail]. We are here to help and will respond to your request promptly.
📌Let's subscribe and follow us to keep updated with the latest news and perks:
Facebook: / elecrow.openhardware
Twitter: / elecrow1
Instagram: / elecrow_official
Linkedin: / elecrow-limited
Tiktok: / elecrow
#CrowPanel #ESP32 #Elecrow #LVGL

[@MarcusSilvamvs]

Great!!

[@mazaman619]

Hello, your resource is very helpful, I want to communicate arduino using i2c , could you provide any resource please. Thank you

[@Elecrow]

Hi, since the board has only one set of I2C pins, and the touch screen is also using this set of I2C pins, so you need to first understand how to use the same set of I2C shared with the touch function without affecting the touch screen, there is a detailed explanation inside this post, I hope it can help you:
forum.elecrow.com/discussion/780/esp32-7-inch-display-how-to-connect-sensor-using-i2c-pin-and-also-use-touch-with-it

[@kunal7biz]

Hi how to set GPIO 38 as analog pin to detect analog sensor values and voltages? please share, I need to do it... Thanks, all your videos are great and i have learned a lot from them.

[@Elecrow]

Hi, thank you for asking, you can use pinMode function to set the GPIO to input mode, then use analogRead function to read the analog value of the GPIO. 😊

[@kunal7biz]

@@Elecrow Thank you for replying, it seams that GPIO38 cannot be used as ADC as per datasheet, but anyways, ..please do an audio tutorial without SD card, if we just need to make some beep sound..if its possible.. again thank you.

[@AbeerahZaman]

Also make video on to interface maps on LCD using GPS

[@Elecrow]

👏👏

[@deryalukuslu2303]

Berbat bir cihaz, satın alıyorsunuz ve cihaz elinizde kalıyor, hiçbir ide yazılımı yok,burda anlattığı çizim yazılımı trial ,doğru düzgün destek yok,bu video da bakın bakın ne güzel yapılıyor sadece almayın, paranıza yazık.

[@huseyinyuzubenli7522]

merhabalar bende satın almıştım 2 hafta oluyor çokça problemler yaşadım kütüphane vs sorunları hallettim ama siyah ekran olarak kalıyor kendi yaptığım basit bir tasarım dahi gözükmüyor ekranda sizin sorununuz nedir ? hangi aşamadasınız.

[@jumbodumbo1472]

It's simple lack of knowledge. Try read sth. A book for example? Have you heard of it? Device is fine. SquareLine Studio is free for personal use. Try reading... for real.

[@Elecrow]

@@huseyinyuzubenli7522 Hi, if you encounter any problems during use, you can find solutions in the forum or send an email to our technical support via [e-mail]. You can also refer to the part after 2 minutes and 19 seconds in this video, which will tell you how to submit the encountered problems in the forum: czcams.com/video/WHfPH-Kr9XU/video.html

[@Elecrow]

Hi, if you encounter any problems during use, you can find solutions in the forum or send an email to our technical support via [e-mail]. You can also refer to the part after 2 minutes and 19 seconds in this video, which will tell you how to submit the encountered problems in the forum: czcams.com/video/WHfPH-Kr9XU/video.html