Video není dostupné.
Omlouváme se.
DD15 Rebuild failure/ DD15/ Most Common Issues/ DD15 Engine Locked up/ DD15 Engine Rebuilding Tips
Vložit
- čas přidán 16. 08. 2024
- New Shop Info: goo.gl/maps/Hz...
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 75241
Now Hiring!
Here at TAT Express, we are always looking to work with highly motivated people and service specialists to join our dedicated and knowledgeable team.
Visit TAT Express to apply.
tatexpressinc....
One question I get asked often is should I rebuild my DD15. In this video, I would like to share three tips to look for before deciding if you should rebuild. DD15 Rebuild failure/ DD15/ Most Common Issues/ DD15 Engine Locked up/ DD15 Engine Rebuilding Tips
dd15 detroit diesel,dd15 engine locked up,dd15 engine rebuild,detroit diesel,dd15 detroit diesel problems,18 wheeler,semi truck,dd15 detroit diesel rebuild,dd15 detroit diesel review,detroit diesel dd15 fuel system,dd15 fuel pump replacement,detroit dd15,dd15 detroit diesel engine,dd15 detroit diesel injectors,tat express inc,detroit dd15 engine,dd15 engine rebuild cost australia,dd15 engine rebuild kit,semi trucks,detroit diesel sound,dd15 engine
If you or someone you know is interested in one of our available position you can contact us at 972-225-3017 or send us your resume at info@tatexpressinc.com
TAT Express seeks the following positions
Service Advisor
A Service Advisor's primary responsibility is to provide outstanding customer service and the best experience possible for someone dealing with a broken vehicle. The Service Advisor will also make sure the shop is running smoothly and efficiently.
Apprentice Technician
The Apprentice Technician's purpose is to be an ethical person with the right attitude and willingness to learn. He/she must be willing to learn from others as well as follow written and verbal procedures to service and repair vehicles. He/she must be willing to clean and maintain their work area and shop equipment.
Journeyman Technician
The Journeyman Technician's purpose is to be a highly trained and knowledgeable technician able to diagnose, inspect, repair, service, and overhaul vehicle problems and maintenance.
Compensation and benefits
• Salary rate based on experience
• Commission plus base pay
• Five day work week NO WEEKENDS
• No nights
• Uniforms
• Heath Insurance
• Paid Training
• Financial Wellness
• Paid Time Off
• Paid Holidays off
New Shop Info: goo.gl/maps/Hz...
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 75241
Mom-Fri 8:00-6:00pm
Call 972-225-3017 to schedule an appointment
Email info@tatexpressinc.com
Check out some of our other videos
DD15 DD16 DD13 Low Power /DD15 low compression/ DD15 no power up hills/ DD15 Detroit diesel engine
• DD15 DD16 DD13 Low Pow...
How to Replace A Wheel Seal on Semi/ Wheel Seal Leak/ Wheel Seal Installation/100kMiles Inspections
• How to Replace A Wheel...
Most Common Issues With The DD15
• Most Common Issues Wit...
#DD15#semitruck#18wheeler
I've followed TAT for 1 year. In Vietnam, a lot of seconhand Cascadia, Prostar above 500k miles imported. I wish vietnam have these truck service shops like TAT to maintain almost trucks
Especially rebuild engine, clean EGR and DPF system.
What we’ve found on the DD15s we’ve tore down is the plastic pickup tube warps and let’s the oil pump suck air- then there’s a check valve in the pickup tube and they stick both conditions will wipe crank out while showing oil pressure and this is on engines with clean oil and were never run hot, we’re getting rid of all the trucks with this engine.
just get a c15 and tell CA to go to hell and you will never look back
I always pressure wash anything and every thing before I start working on it .. that's a good start .. It makes me cringe every time I see some work on something that has dirt and grease falling from it..
it's not the DD15 that worries me, it's the aftertreatment system attached to it that makes me lean towards the 60 series. I heard if anything happens to the 1 box it can cost more than 10 grand out the door. Potentially putting owner operators out if business, and it's a shame cause i really like the new Cascadia's :(
West2401, the after-treatment system, is the number one concern for all owners. It is best to follow OEM maintenance to avoid major repairs. 🔧💪🏼
This video has nothing to do with the aftertreatment system but the engine itself.Series 60 is a good motor,but myself I like dd15 better.More torque and more flexibility, and better fuel mileage 🙂
Very helpful video, I have a epa10 DD15 in my shop right now that had a liner failure, after removing bearings and inspecting crank shaft I found severe damage to the crank itself and this video helped me decide to not go any further with the rebuild of this DD15.
If you have a new cascadia with brand new gen5 dd15, have valve adjustment done asap. When you hear noise from the overhead, its too late, warranty will pay for the repairs but now you need exhaust valve bridge and adjustment screw.
If out of stock it will sit in the shop. Avoid down time.
Thanks for sharing your experience. Be sure to subscribe 💪🏼🔧🚚
Only the trucks from mexico have that problem. Ask me how i know?
@@truck6280 had a few here in NC so I’d say not just a Mexico problem. There’s a bulletin out for it and dependent upon how bad it is depends on if it gets an overhead, adjusting screws, or bridges & adjusting screws.
@@dsdiesel8667 good to know. At first they said it was only the saltillo factory affected because machine was out of calibration . I had to get my valves done about 15 times in 3 months until they gave me a new truck. Lost a LOT of $$$$$$$
Thanks I’m going to a oil sample first
Thanks again for the knowledge
My question is, if the out of frame overhaul failed shortly after, did they line bore the mains, and turn the crankshaft ??
Like the videos !
I agree, also with engine seized, connecting rod can develop a slight bend that can cause failure later on...
I’m about to do injector cups on one this week
thank you so much for this video,would you please provide the video how can i do drain change oil and how can i change battery.
I bought a Jbhunt 2016 Cascadia - dd15 with 298k from freightliner dealer. Is there a way to check the dpf and tell if it needs to be cleaned or replaced.
Great video
You can’t replace the crankshaft if you spun the bearings? Why do you need a new block engine every time?
@poonetidestroyer8955, The cost of this process often make it more practical to replace the engine or opt for a remanufactured unit to ensure reliability and longevity.
Man put my truck together for I can get back to work! 👀😂
For sure!! We are on it. 🔧🚚
Why DD 15 coming blue smoke from exhaust a lot what is issue
Can you do some video on hinos ?? Top problems
Thanks Adam.
Yes Sir, Thanks for watching.
I heard a dd13-15 delete n it sounds lound n disgusting hope to learn more about them in my country
Which is your country taking about
This is in USA
@@kulwindertatla5987 i knw its texas i live in jamaica
Actually, the DD15 is much quieter than older model engines. Less vibration as well 🇯🇲 🔧💪🏼
💪🏼🔧🇺🇸
I don't understand why a DD15 can't be rebuilt under all conditions? If you're replacing any bad or worn parts, keep everything clean, what's the problem?
Do one of these for the 60 series
Ok with that being said, what is the sutt that enters your engine thru the EGR doing to this egine?
@oraliaornelas5742, Regular maintenance and proper duty cycle is essential to manage soot levels and prevent related problems.
I have a 2009 freightliner cascadia with a dd15 engine my question is can I rebuild the bottom of my engine. And leave the top of the engine along
How much is a DD15 replacement
How much does a engine swap cost
Well said Adam.....
Should I replace my crankshaft when doing an overhaul
If an inframe is done on a dd15 specifically on a 2014 Cascadia with a PAI aftermarket inframe kit and the motor sounds fine great actually when it idles but when you give it some fuel while it’s idling is starts clanking would this be a result of poor fuel and not priming the fuel pump ???
You figure it out what it was?
Freightliner advertised at 38k 2016 with 769k on it. Says DD15 motor. Says lower done at 599k. What does this mean. Is it worth buying. Plan to work 3 more yrs. Thanx, Claude
Because of my curiosity (as an upcoming Carrier and from a lot of comments herein), are a lot DD15 users having issues due to a high mileage truck (say about 400,000 miles or more)?
How much is the DD15 crate motor?
Great channel
Welcome! 👍🏼😀
Hello Adam. Looking to rebuild my Detroit 12.7 60 with all OE Detroit parts. Is this a motor you guys work on?
Jorgie, yes 👍🏼
How many more miles can you get out of the truck after a overhaul rebuild with new parts ?
do you know if it's possible to fit a dd16 to a truck that had a dd15 more the electrical side of things I believe the base engine is the same we can't get an engine in nz at the moment but we can get a dd16
Hei Adam,if I need a new (replace)DD15 right now for my 2014 Cascadia,what's on the market?
It would depend on the serial number and if the engine is available.
How much for a rebuild
I would rather have a million mile 12.7 than a new dd15
Why in the hell didn’t they just upgrade a reliable proven engine like the 60 series ? Instead of this Detroit imposter designed by Mercedes Benz..😠
Outdated maybe
I will never own a DD15. These German designed engines are the down fall for a lot of owner operators. Wanna stay in business as an owner operator ? Get a 60 series 12.7 if you can find one and take care of it.
Truck has been in the shop for 4 weeks waiting on the stage 3 rebuild kit. Freightliner is charging me $40,000 for the rebuild. Does a remained engine from Detroit cost about the same?
In Australia it's about $35,000 aud for a reman like what is sitting there with labour.. replaced one about 3 weeks ago
Lightning, It would cost more to swap the entire engine. Thanks for watching 🔧💪🏼🚚
@mick romer,Thanks for sharing. 🇦🇺💪🏼🔧
I would just buy another truck. Much cheaper. Than paying 40k for a rebuilt
@sheldon, with current market conditions, it is challenging to find a quality truck for that price. Thank you for sharing
Very very good sir beautiful 🤩
Glad you liked it. 🔧💪🏼🚚
I have a dd15 2009 freightliner cascadia I had a mechanical working on my truck he put dawn dishwashing liquid in my air to air cooling? He told me too turn the key to crank the truck up the start and now the motor will not turn over please help is my dd15 engine lock up for good
why would you let a mechanic blow up your equipment like that
What's the best alternative engine instead of dd15
im putting 60s on my cascadias do you have any imput on this that you know of
Cindy Sanchez, Detroit no longer manufactures parts for the 60 series, so quality parts are challenging to find. 🔧💪🏼⚙️
@@TATEXPRESSINC I didn't know that. Thanks.
hello mr adam my engine dd15 is lockup am looking to replace the bad parts only is that possible or i have to put new engine?
May I know where is your workshop located?
What can i do...? I had my dd13 rebuilt but it locked up 250 miles after rebuild. Mechanic said i had 1 year warranty but now is backing out. Does anybody have any ideas how i can approach this situation. I dont have money to rebuild again
If u have it in writing get a lawyer
What is the cost of an engine swap
Let’s go Cowboys 😎🎩
Hey brother u look a bit skinny i know u work hard but we can't replace you sir✌🕵🔥
Thanks for your concerns, but I feel as healthy as ever-just shed extra weight. 💪🏼🔧😀
When is a good time to look at rebuilding or getting a new engine when it comes to the d13 Volvo engine
Sherm, it would be best to have the unit checked out. You could do an oil sample and keep an eye out for high crankcase pressure or if you are burning excessive oil.
Thank you sir
Sorry my time is way more important than money.
I don't recommend truck with DD15 engine
Detroit needs to ditch that DD15 it's a hybrid pos.
@trucking with cliff, thanks for your feedback. The DD15 is here to stay; the gen 5 is one of its best models. Most of the bugs have been worked out.
@@TATEXPRESSINC I hope so because the motor that's in the 2015 I bought shelled the bottom end before the 500k mark of course there's no telling how it was taken care of before I bought it. Hopefully the def systems improve again another issue I had to deal with the day the factory warranty went out 400 miles from a dealership that closed at 11pm.
The best thing to swap that boat anchor out with is anything but that hell I’d put a Briggs & Stratton in the fucking thing …them motors are junk!!!!😉
Better than Cummins right now. I see the new x15s a lot with low miles having some big issues. Have seen many dd15 a make it over a million and still running. People who complain about them don’t take care of them. Especially guys who talk about how they did less maintenance on an old engine and it still would run. New engines have to be taken care of. These engines are not for the guys who do services once a year.
@@joshrichardson7340 we change your oil every 7000 we’ve got two 2250s with over 800 on them and only thing we’ve done is open up the top and run the rack , The key thing is though you gotta delete them 😉that carbon pack is a killer and them motors
DD15 please 🏃♀️. Junk motor
Spun main = new block every time
Why tho?