Please consider subscribing to my channel and follow me below Social Media Facebook www.facebook.c... Instagram / curioushvacguy For any inquiries please contact me at curioushvacguy@gmail.com
Phenomenal video, thank you so very much, I have to tell you, just between us.... it changed my life! I used to walk with a limp and had carpal tunnel but now after watching this I'm cured 🙏👍👍 may thanks! As a gift to you for the selfless act, if you can help me get this million dollars out of the bank that I just inherited from my great-grandparents from Zimbabwe, I will give you 90% of the money. All I need is your address, mother's maiden name and the last four of your social security number 🍺🍺😁
Manufactured less than 2 years ago and likely installed in last year and already failed. Stop putting the 8145s in guys. They are junk. Just go to the 9145. Not much more $.
That little wrench is called a spanner wrench. And also here is some useless information. When you come across fluffy ice formation it can be an indication that the coil is running much to cold. The reason for the fluffy ice is that the moisture in the air has no time to condense on the surface of the coil. If the ice is clear it shows that the moisture in the air is condensing out of the air and that the coil is not as cold as the fluffy ice. Clear ice is better for drainage. Isn't that some useless information.
@@douro20 They have an entire line of surge protectors and they also have a lot of A/C products. I have no idea what they make or don't make though. Their surge protectors are unique as they use a gas discharge tube to save the MOV. Many SP just have MOV's and eventually they wear out. The gas discharge tube gets hit first saving the MOV's.
I’m sure Chris will check every stitch on the hats to make sure it meets his standards !
Dude that Chris impression when you talked about that Orbit gardening wand was HILARIOUS lmao
That clock has a 2021 manufacturing date and died already?
Phenomenal video, thank you so very much, I have to tell you, just between us.... it changed my life! I used to walk with a limp and had carpal tunnel but now after watching this I'm cured 🙏👍👍 may thanks! As a gift to you for the selfless act, if you can help me get this million dollars out of the bank that I just inherited from my great-grandparents from Zimbabwe, I will give you 90% of the money. All I need is your address, mother's maiden name and the last four of your social security number 🍺🍺😁
Been wearing Keen boots for the past couple of years and love them. 👍
No need to install timer with housing. Those Grasslin style timers can be installed in the old Paragon timer mount.
If you mark the termination tab instead of outside dial,you'll have know in about 2min if clock is rotating
“Well, Hello There Bill”! I hope all is well with you! Good to see you posting again! Best Regards!
Hey, thanks
Looks like the evaps are much newer than the off-the-shelf Copeland condensing unit. And a 2-year-old clock that's already dead...
I watch the over time show finally found your channel enjoy it your a cool dude
Nice job, Bill.
Nice work Bill. Thank you for the knowledge.
I'd say that's a crappy clock if it didn't even last 2 years.
Good job Bill, Looks like you have a snow man in your evaporator coil, or on top of your TXV.
Manufactured less than 2 years ago and likely installed in last year and already failed. Stop putting the 8145s in guys. They are junk. Just go to the 9145. Not much more $.
Hello from the UK. thanks for the new video
Good to see you Bill great video keep up the good work.
Good one Bill 👍
I call that tool the “Nut Grabber”
That type of frost you mentioned at the beginning is called hoar frost.
That little wrench is called a spanner wrench. And also here is some useless information. When you come across fluffy ice formation it can be an indication that the coil is running much to cold. The reason for the fluffy ice is that the moisture in the air has no time to condense on the surface of the coil. If the ice is clear it shows that the moisture in the air is condensing out of the air and that the coil is not as cold as the fluffy ice. Clear ice is better for drainage. Isn't that some useless information.
I installed Rectorseal surge protectors on my 3 condensers discos. I bought those nut wrenches also. Made the job a lot easier.
Didn't know Rectorseal sold such things. Probably not made by them, just sold by them. I know them from their plumbing products.
@@douro20 They have an entire line of surge protectors and they also have a lot of A/C products. I have no idea what they make or don't make though. Their surge protectors are unique as they use a gas discharge tube to save the MOV. Many SP just have MOV's and eventually they wear out. The gas discharge tube gets hit first saving the MOV's.
9:49 it’s totally cool, makes for a good day.
Alive!
Have you been doing some stand up comedy? That would explain you not posting videos recently. 😂
Always enjoy the vids keep em coming
Hi , and yes I did miss you!
You must be living in Zimbabwe or Canada....they are basically the same place.....😅😅😅😅😅
Well I managed to find it from Canada….
Called a spanner wrench…
171 thumbs up
❤😊 hey there son.
🤘🤘🤘
👍👍👍
🇺🇸💪👍❄️ nice