How to Replace Front Window Regulator 1998-2011 Ford Ranger
Vložit
- čas přidán 16. 06. 2021
- Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ia/1AWRG00328
Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle! This video shows you how to replace both the window regulator and the motor on your 1998-2011 Ford Ranger.
• Check here for more videos on the 1998-2011 Ford Ranger: • Ford Ranger 1998-2011 ...
This process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
Tools you will need:
• Phillips Head Screwdriver 1aau.to/omB/1AXAA00013
• Pocket Screwdriver
• Pry Bar 1aau.to/oc5/1AXAA00020
• 11mm Socket 1aau.to/oms/1AXAA00015
• Cutoff Wheel 1aau.to/oh/1AXAA00254
• Rivet Gun & Rivets
• Painter's Tape
• Center Punch 1aau.to/oak/1AXAA00055
• Hammer 1aau.to/odd/1AXAA00091
• Pick 1aau.to/ock/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Ford Ranger 1998-2011 3rd Generation: • Ford Ranger 1998-2011 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√
What do you do if the motor won't lower the window?
Too bad the owner never used Fluid Film in that door! Nice job changing the regulator, thanks for the video!
you dont have to do all those steps, the bar does not have to be removed. you can still get the regulator out no problem
Nice solid door lol.. must be from Midwest
My Driver’s side window rocks forward and backward for about the first six inches of downward travel and the smooths out. It raises smoothly with no issues. Douse that sound like the mechanism just needs to be cleaned and lubed as well as the channels the glass rides in?
Amazing very professional job......
What size bolt replaced the rivets?
1) Is this a second channel of 1A Auto?
Very helpful, thanks. The door panel differed on my 2009, so here are some notes that apply to later models:
Lmao