HOW TO FIX WINDOW MOTOR, CAR WINDOW DOES NOT GO UP DOWN FIX
Vložit
- čas přidán 2. 12. 2020
- HOW TO FIX WINDOW MOTOR, CAR WINDOW DOES NOT GO UP DOWN FIX
If your car window does not go up and down so you tested your car window and found out that you have a bad window motor, in this video we will demonstrate how to fix bad window motor and how to find out what is wrong with the window motor on your car. Window motor can be easily fixed. Sometimes when a window does not go up and down it could be bad window switch, fuse, wiring, window regulator but very often it is a bad window motor. In this video we will demonstrate how to fix window motor by taking it completely apart and inspecting it as well. It takes only a few minutes to fix bad window motor in most cases. Once we fixed the window motor, our car window was moving up and down with no problem. Hopefully you will be able to fix your window motor easily.
► Interflon: amzn.to/3jgI8h2
► Mechanic Tool Set: amzn.to/38Nt311
► Torx Bit Set: amzn.to/38yUrkF
► Impact: amzn.to/36sLIyw
► Panel Removal Tools: amzn.to/2siAs9l
► Screwdriver Set: amzn.to/2EfbsCC
► Power Screwdriver: amzn.to/2soojPW
► Door Panel Clips Assorted: amzn.to/2EKaONs
► Scanner That We use the Most: amzn.to/3jogxur
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: gf.me/u/y4u9cd
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. - Auta a dopravní prostředky
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: czcams.com/users/AutoRepairGuys
⛐ Our Donation Link: gf.me/u/y59hvn
Thank you for this.
I used this method on my own car (a Focus), and didn't even have to remove the mechanism --- in fact I could not remove the mechanism, since the window was stuck in the closed position, so I could not lower it to undo the glazing bolts and remove the regulator.
Instead I removed the power connector and then the magnetic cover and pulled out the motor, just as in your video. The motor had seized, and after fixing it, I pushed it back in (taking hold of the window glass and pushing it down and up a bit helps to get the worm screw back in), reconnected the power, and --- to my amazement and by God's grace --- it worked!
If I'd taken the car to a garage, they would have probably just destroyed the regulator (and quite possibly the glass, too) and fitted a new one: it would have cost a fortune. Thanks again!
This is what I was thinking of doing instead of buying a new one, we will see how it goes. my motor is a mess to take out with all the assembly. UPDATE:: I cleaned mine today the housing was rusted inside , rust everywhere! the armature was also rusty. Cleaned it and works like new!
Nice man! Mine's running really slow with hardly any power, not enough to slide the window. I'll check mine out and see if I have the same. How's it working now?
I have a acura integra 1986. Plan on doing mine plan on using these stuff below! On Amazon!
Thanks for info!
For window track after clean
A- WD-40 Specialist Silicone Lubricant Spray
For electrical cleaning, 2 options.
A-Hosa D5S-6 CAIG DeoxIT 5% Spray Contact Cleaner, 5 oz
B- Mass airflow cleaner
@@ezra3776 did you do it? mine's running slow as well
Love u guys! Straight to points, make it simple enough for common not so smart like me to understand. Keep up good works👍👍👍
Fantastic video!, everyone else just replaces the motor, you actually repair it!
Perfect Video ! Love what you did hear - I learned something good - thank you !!!
Great video! You're the man!
Thanks man You are good teacher!
Thank you guys so much this is such a God send
Perfect,thanks a lot
Brilliant! Thank you.
Currently fixing a 1991 Acura legend L sedan and the parts are $150 per window motor and this just saved me from dropping $600. I didn’t even know you could do this until I went to CZcams.
Thanks guys, guys that was really great guys. You guys, make guys like me, like guys that are like, really good at mechanics.
well done if i had figured that would be more easier to tackle for my audi tt mrk1 window motor if its possible. instead i brought two donor motors. this is more simple than cleaning a e scooter wheel hub lol great job guys
Good job guys
Just the solution I needed! Thanks.😂
Amazing I’m going to try this !!!
Thank you!
It worked 🕺🕺thank you so much
thank you brother
Very helpful video
Oh wow, I’m trying this out tomorrow
Brilliant
Thanks man for that
It worked on a shoe string budget I was able to fix Moms 2004 highlander pass front motor on to the next 3 😢😅thank you very much 👍🏽💯
Be careful pulling the worm screw out. I broke the contacts on mine when I pulled it out. Definitely turn the copper spindle before pulling it out. My plastic collar with contacts broke because I didn’t pull it together.
thanks a lot!
The awesome auto guys !
@Auto Repair Guys I opened up my window and yes what you said is exactly what's wrong with mine. It's full of rust. I knew it was probably full of rust when I couldn't pull out the bolt easily.
Hey brother,
I really like your video.
Make you can help me.
I am desperately looking for a used Peugeot 2007 307cc window motor.
I cant find anywhere, on in the UK and its backwards drivin g.
Do u know where i can look?
Brilliant work 🤩 Save heaps of $$$s 😊
Thank you 👌
In my case,
- I unmount the rotor shaft, the round lid hidding the cog
- clean the moisture in the nylon or plastic cog plus where it seats, there was some water and rust
- dry it all with a clean rug - I didn't use any oil or liquid
- regrease it, with some drops at the cog axle and where the cog seats. Plus 1 drop at the end of the rotor shaft and before the worm screw, I guess is where the rotor shaft seats on the plastic box.
- and it work again.
That save some hundred euros and some twist and turns with the family car, until next time. Brand dealers charged me 230€ for a new motor, no pieces at the car scrapping dealears around me, and the asian copies start from 100€ but I wasn't sure about the compliance as the pictures didn't look same same as the one I have. So it was a good solution.
I did the same repair and cleaning just today, some hours ago but unfortunately is doesn't work, I also put some grease in the rotor and when I connect it to the electrical plug in the car, the gear doesn't run but the rotor runs. May be is the gear broken? I wondering how to open the plastic part. It seems to be one piece whole. Don't wanna broke it, otherwais have to buy a new one. Any advice please?
Last sunday I briefly put 18V from a Bosch PSR screw machine battery on a what I thought was a dead window motor on my Trax, it came back to life immediately. Worked like a charm. 😅
That is an interesting idea but make sure to put the 18V to it momentarily only. If it doesn't drive it free right away, quit or you chance burning out the windings etc. which will render the motor unrepairable if you need to do a disassembly like our hosts demonstrate.
@@leh3827 I am aware that it's a bit unorthodox and I did put it on just for a second a few times. My lazyness made me do it.
@@KingCaprice666 I have that very same laziness. If it's not necessary, don't do it😃👌
An interesting idea pur forth by another commenter, Maarten Verheyen, is to put 18V to the motor contacts momentarily; this could break it free from it's stranglehold of rust and corrosion. If it doesn't drive it free right away, quit or you chance burning out the windings etc. which will render the motor unrepairable if you need to do a disassembly repair like our two hosts demonstrate. I don't know if it is possible but if it breaks free with the 18V push, you might be able to spray inside the motor if an access hole exists, or perhaps drill one(avoid getting metal cuttings inside by using a rare earth magnet). This could work if the motor is not too far gone, in which case it would have to be removed from the vehicle, and taken apart as demonstrated😅
How do one test Volkswagen tiguan 2012 motor? Its having more than two wires. Thanks
U the first guys to show stripping and cleaning the motor. Other you tubers waste your time.
Hi my rear quater window won't open all I can hear is a click on that side everytime I try to open it what can it be? Btw the same switch controls the front which works
Thanks
I give that ago it’s stilly money for a new one
How many times do you think you could say guys just curious I mean we didn’t hear it enough
Good video - Slava Ukraine
👍👍👍
i would definitely deep clean those worm gear and grease them up.
What if the cog turns fine with the motor out but won't turn with the motor back in?
And when you turn the motor with it in the cog doesn't turn but the motor does?
@@missbuon If the motor turns when it's back in the assembly, but the gear that it is supposed to turn does not turn, it sounds like the gear/cog has missing teeth in it. Worm gear on motor is usually made out of metal, and the gear/cog it mates up to is usually plastic.
4:45 Carbon Brushes: they make contacts to motor winding from 12V supply voltage. They wear out over time.
Went to the Interflon )?) link and it's grease, it's 27€ (France) and there is no rating or comment. I thought it was a rust remover. You don't hold the can still enough for me to read the writing.
You should remove the gear before you pull it. You may damage the gear
😊😊😊😊😊
please just dont use the word guys so much please
I use it as as a drinking game. Everytime he says"guys" take a shot. Abstloyty smsahed rihgt now....
Wow, so when something does not work you take it apart and fix it instead of throwing it away and buying a new one. I'm going to guess you were not raised in America.
sadly that did not work for me
Crazy not one negative comment???
4:10 8:22 both times made me cringe a little. LOL. You have to screw it in. That worm drive is meant to hold without slipping. If you force it in or yank it out you run the risk of stripping those plastic gears.
7:00 Also you should have taken apart the gear housing. Taken the gear out and flushed out everything. 7:14 You should have taken a wire brush to the worm drive not just wiped it off with a towel.
Getting famous off comments day 190, so I can live the dream, live everyday like it’s your last day🤙🚀🚀
Where's the window ?
1:56 You say that nothing it happening. Um No. It is sparking. That right there IS something. That right there is the first thing that give you a clue to what it is wrong with it. No spark means there is no connection. While sparks mean that either something is jammed and the motor is trying to turn or something got fused.
Stopped as soon as I head that. Haven't watched passed this point. So gonna find out.
Turnnn
This may save my ass
Thank you boss!
You’re probably very qualified but you speak much too fast
Not worth all that work. Just replace it
ok guys ,great video !!!