Its easy. Might have to get the exhaust out or the way. Unbolt the droveshaft. Theres a bracket thats bolted to the case by the bottom front ward bolt. 2 bolts facing upward into the block. Remove the bracket. Unbolt the 3 remaining bolts. Pull it out. Its snug. Clean the mating surfaces and apply gasket maker. Then do everything you just did to get it off in reverse order. Unsure of tq specs
Cool friend. Would you like to try our 6500k led headlight bulb? We wanna send it for you to try. Please check your email, hope to hear from you, thanks.
I wish you'd show how to shim
You got a commercial voice bro!
😮😮😮🔥🔥🔥🔥
billet stuff is so good :D
Can you show how to remove and install the transfer case? Can't find one video. Need to do this myself. Can't afford to pay someone. Thanks
Its easy. Might have to get the exhaust out or the way. Unbolt the droveshaft. Theres a bracket thats bolted to the case by the bottom front ward bolt. 2 bolts facing upward into the block. Remove the bracket. Unbolt the 3 remaining bolts. Pull it out. Its snug. Clean the mating surfaces and apply gasket maker. Then do everything you just did to get it off in reverse order. Unsure of tq specs
So all stock internals in a billet case ?
How much power is it good for roughly after this
Does it matter if ur t case is manual or auto? Is gearing same?
yes auto and manual tcases differ
Ok, thankyou
Cool friend. Would you like to try our 6500k led headlight bulb? We wanna send it for you to try. Please check your email, hope to hear from you, thanks.