Do you want a PERFECT Sounding 2JZ SUPRA EXHAUST? You need these 4 Mods!

Do you want a PERFECT Sounding 2JZ SUPRA EXHAUST? You need these 4 Mods!
The 2JZ GTE powered MKIV Toyota Supra Exhaust can sound amazing if set up right. There’s a few modifications you need to do to unlock the perfect 2JZ exhaust sound. The stock twin turbo needs to go and a free-er flowing single turbo set up needs to be put in place. There are a few more components that will need changed out in order make a supra sound like a SUPRA!
-Tuner Test Drive

[@Wretched2JZ]

Damn the idle towards the end was 🔥🔥😮‍💨👍🏼
272s or 280??
I doubt they are 264s 🤷🏼‍♂️

[@TunerTestDrive]

274, they are GSC S2

[@TunerTestDrive]

Help the Supra and 2JZ community out and list your favorite turbo, manifold, exhaust, and cam combination. Or at minimum the manifold and exhaust combo.

[@carti.2jz11]

Your right on the header, the best manifold for the 2JZ is the OG RPS, sadly it is nearly impossible to get the hand on one.

[@TunerTestDrive]

Agreed, the OG RPS mani with an HKS 4” Ti Racing exhaust is the ultimate setup for exhaust tone.

[@suprarob8553]

I just found an OG RPS manifold that im going to run and pair with the tomei ti. Curious to see how it sounds with it

[@bigjdm5460]

Important info here. I think people overlook this. I have forged build for my IS300. Currently have R35 coilpacks and bracket /harness, GSC S1 VVTI cams / head decked and complete with GSC springs Ti retainers/ OS Giken TR2CD twin plate clutch and fly, Manley H tuff rods , CP 9:1 Pistons , serial nine shifter and CDPRO bellhousing/ I haven’t assembled bottom end because I really want to go real street billet mains/ align bore etc def decided for sounds a PHR twin scroll tubular twin gate manifold with a G30-900 or G35-900 A/R 1.06 divided turbo housing. SO MUCH MONEY !!!

[@Toobluejzs147]

Getting my exhaust done and it scares me that u said the tubular gives you the 2jz sounds, cuz i did acast one and haven’t heard it yet, hopefully it sounds good

[@TunerTestDrive]

Let me know how it turns out. I went through 4 exhausts on my cast set up before finally switching to a tubular manifold which finally made the car sound like I thought it should.

[@Toobluejzs147]

@@TunerTestDrive sounds good man ill probably post a video not alot of videos on the jzs147, i went with the cast manifold due to heat management and spool time and realiabilty, and iam automatic so faster spool is what i wanted, maybe in a few years i will do tubular

[@Toobluejzs147]

@@TunerTestDrive to me it sounds awsome rn, only running 3 psi so i bet it will sound even better with boost! But haven’t heard a 2jz in person with a tubular manifold, iam running a spa log manifold on a t51r 6266 straight piped

[@Hoopers_s]

Logs sound trash. Artec cast sounds good for being cast. But it isn't no rps or sp f1.

[@EddyR07]

Which manifold was in that Supra?

[@TunerTestDrive]

This car has a Boost Logic manifold

[@EddyR07]

Thank man appreciate it. Keep it up. I learn a lot on your videos.

[@sheikhmubarak6612]

One thing that makes the biggest difference in sound is bore to stroke ratio. The reason why the RB26 sounds better than the 2JZ is because it has an undersquared bore to stroke setup, while the JZ is squared off. This is also why the 1JZ sounds so much more exotic than the 2JZ. Nothing out there sounds like a 1J with a straight pipe exhaust.
Also, the design of the manifold matters a ton. If you can, get one with equal length long runners that put the turbocharger more forward in the engine bay and use thin wall 321 stainless steel material. Obviously, guys running a full radiator with a pro mod turbocharger will have fitment issues but that's obvious.
I personally plan on building a 2JZ with an 1JZ crank to get that exotic sound with a custom manifold. I will be using a SP spool up valve and a Mercedes supercharger to have excellent response in the lower rpm's along with a Garrett G45 turbocharger. Just collecting money right now to fund my build. Also, this is the best sounding 2JZ of all time:
youtu.b/6pWhNf7gRX4?si=jHbT98ov5m7oV75Q

[@loverboy8476]

bore/stroke ratio doesn't effect the sound

[@superbarnie]

Bore/stroke doesn't effect the sound directly. Bore/stroke ratio determines maximum RPM which is what affects the exhaust note frequency. Also, putting a 1JZ crank into a 2JZ block is just going to destroke the engine and give you way too low compression. If you want the 1JZ sound then just use a 1JZ.

[@loverboy8476]

@@superbarnie+9000rpm JZ-engines are so rare that that argument is invalid. 86mm stroke isn't long enough to restrict rpm. It's 90% the exhaust manifold. Trust me on this one. The rpm just affects the frequency not the shape of the pressure waves.

[@bal_723]

imagine people with 2jz ge watching this video to understand that its not for them