STL can be found here: www.thingiverse.com/thing:596... This mod makes the boxer antenna shorter and more durable while preserving the functionality and range!
Great mod and great video going over everything you need to know to do this mod. great video angles and good verbal instructions through out. Mod looks really good and performs on par with unmodded boxer. 3d print is also spot on. I also took plastic part of sma off and some foam in module bay as @prophead did. Thanks Dano!!
just finished the mod and did a test flight w/ my 2.5" geprc phantom/cinerace20 frankenstein and had no noticeable difference w/ range. I flew to the where I'd start losing signal before the mod and was able to fly just as far w/ the mod. thanks for this. I like it a little more aesthetically than the stingerswarm variant. and, if I wanted a pristine holeless case again, it'd cost me 5.00 plus shipping from Radiomaster. thanks for sharing.
Did it today, also removed the plastic part around the sma connector by simply unscrewing the nut on the inner side. Added some foam inside the module bay for anti wobbeling. Signal seems to be as strong as before…maiden flight will follow! Thanks for this easy, clean and nice idea m8 ❤🤙🏻
and make sure your buttons didnt fall out while thumbling around with the disassambly otherwise you will be very sad when you turn the radio around after everything ist done and you buttons are missing dont ask how i know that .....
nice video! I have suspected my boxer antenna to be broken, it just free spins. You confirmed it with those pictures. I'm surprised more people don't talk about this problem... Ordered a new one, in the meantime I wonder if I could repair the one I have like you did. any tips for taking the antenna apart? I will probably end up doing this mod. Thanks for sharing
You have to take an xacto knife along the bottom of the plastic housing (closest to the main shaft that leads to the SMA). Its kind of hard to explain tbh. Just look from the SMA plug up to the main T part, you will see 2 splits on the bottom, thats where u should pry.
@@DanoFPV I'd definitely watch that video. I'm going to see if the antennas are available from getfpv or RDQ soon, since they are local to me. Otherwise I'll pick one up from radiomaster. If it doesn't work, I'll have a backup for my pocket anyway.
@@kurtzFPV instagram.com/p/Cx--_rqrniX/ That mod is very simple, you would just open up the boxer after you printed the piece, and pop the new ant on. www.thingiverse.com/thing:6251073
@@DanoFPV really appreciate the link. I bought the antenna finally from radio Master but have been too busy/lazy to try the install. The link will be a great help. Edit: the mod looks perfect. Like it came that way from radiomaster. You should post the vid to CZcams also.
Found your channel through a grim ripper vid. Nice drones dude, looking forward to seeing more of your content 🤜🤛
Great mod and great video going over everything you need to know to do this mod. great video angles and good verbal instructions through out. Mod looks really good and performs on par with unmodded boxer. 3d print is also spot on. I also took plastic part of sma off and some foam in module bay as @prophead did. Thanks Dano!!
♥️♥️♥️♥️
just finished the mod and did a test flight w/ my 2.5" geprc phantom/cinerace20 frankenstein and had no noticeable difference w/ range. I flew to the where I'd start losing signal before the mod and was able to fly just as far w/ the mod. thanks for this. I like it a little more aesthetically than the stingerswarm variant. and, if I wanted a pristine holeless case again, it'd cost me 5.00 plus shipping from Radiomaster. thanks for sharing.
Awesome, glad i could help :)
Did it today, also removed the plastic part around the sma connector by simply unscrewing the nut on the inner side. Added some foam inside the module bay for anti wobbeling.
Signal seems to be as strong as before…maiden flight will follow! Thanks for this easy, clean and nice idea m8 ❤🤙🏻
Great work man 👍
Ty :)
Thank you for this!
Thats a pretty neato mod
This is sweet man.
great mod! was looking for exactly that and nice reference to stingerswarm! thingy-links seems to be not working though?
Updated a while ago btw, it was some yt verification nonsense.
and make sure your buttons didnt fall out while thumbling around with the disassambly otherwise you will be very sad when you turn the radio around after everything ist done and you buttons are missing
dont ask how i know that .....
nice video! I have suspected my boxer antenna to be broken, it just free spins. You confirmed it with those pictures. I'm surprised more people don't talk about this problem... Ordered a new one, in the meantime I wonder if I could repair the one I have like you did. any tips for taking the antenna apart? I will probably end up doing this mod. Thanks for sharing
You have to take an xacto knife along the bottom of the plastic housing (closest to the main shaft that leads to the SMA).
Its kind of hard to explain tbh.
Just look from the SMA plug up to the main T part, you will see 2 splits on the bottom, thats where u should pry.
Hi , antenna of T pocket feet really nice in the boxer ?
what about the range?
Wieviel Reichweite verlierst du mit der kürzeren Antenne?
Hi, would you consider making video about boxer with the pocket antenna mod ?
I did! instagram.com/p/Cx--_rqrniX/ Sorry for the late response :) www.thingiverse.com/thing:6251073
how's the range and penetration ? same same ?
@@DanoFPV
Is it possible to installed a Radiomaster Pocket folding antenna
I ordered one, still waiting for it to arrive
have you tried it ?
@@DanoFPVany luck on the pocket folding antenna mod
Does original T antenna fit inside of case without drilling that hole in plastic?
nope
That's fucking awesome. I'm not gonna do it, but that's fucking awesome. Radiomaster needs to come up with a better design though like god damn.
100% agree
Do you think it would be difficult to mount the folding antenna for the pocket on the boxer? They look to be listed at like $4 at radiomaster
Idk but I’m gonna try it
@@DanoFPV I'd definitely watch that video. I'm going to see if the antennas are available from getfpv or RDQ soon, since they are local to me. Otherwise I'll pick one up from radiomaster. If it doesn't work, I'll have a backup for my pocket anyway.
have you tried it yet ?@@kurtzFPV
@@kurtzFPV instagram.com/p/Cx--_rqrniX/ That mod is very simple, you would just open up the boxer after you printed the piece, and pop the new ant on. www.thingiverse.com/thing:6251073
@@DanoFPV really appreciate the link. I bought the antenna finally from radio Master but have been too busy/lazy to try the install. The link will be a great help. Edit: the mod looks perfect. Like it came that way from radiomaster. You should post the vid to CZcams also.
Did u notice any difference in range?
nope ;)
I'm thinking about a tx12 is this you EDC now?
It is my EDC
what's wrong with your boxer?......or your hand?
my boxer is smaller than yours.....oh...my hands wrong?
Wat?
hello , how can i found the STL, the link not work
odd, it works for me. check the url again www.thingiverse.com/thing:5969962