A Conversion You Never Knew You Needed!
Vložit
- čas přidán 15. 09. 2021
- In today's Tech Thursday brought to you by EPIC BMX (@_Epicbmx) Phu shows us how to convert your loose ball-bearing non integrated 1 1/8" headset into a non integrated sealed bearing 1 1/8" headset. If those measurements and different bearing componsones confused you, just sit back and let Phu break it down for you.
Join this channel to get access to perks:
/ @alfredomancuso
Thanks for taking the time to watch my content! If there's anything you'd like to see, please let me know in the comments, and if you can, don't forget to drop a like!
If you'd like to support me:
For merch visit: www.AlfredoMancuso.com
onlyfans.com/alfredomancuso
/ alfredomancuso
/ alfredomancuso
/ alfredomancuso
/ alfredo.mancuso
Snapchat: AlfredoMancuso - Zábava
I love the way phu be sayin “ but look , it won’t wrk “
It's cool you guys are showing ppl how to upgrade their old stuff, especially if they are on a budget. My brother was gonna buy my nephew a new unsealed headset for his bike & I had to step in & make him get the mission headset. It rides better than ever.
⁰⁰⁰⁰
I got the Jet BMX knockoff from Amazon. Its great for my older eastern.
I'm glad I found this video. Saved me a headache because I was thinking about converting to sealed bearings on my non integrated headset and frame.
I did this to my '99 ep a few years ago. Very simple to understand. I installed odyssey forks with an integrated race and it works awesome.
I used the mission kit on my 2000 Haro Revo, and it worked. I bought a few other kits first, but they used loose bearings. Phu is showing stuff I have had to figure out on my own, and He is Awesome for Sharing his Knowledge with the interweb. Thanks Phu! Your Hair and Your Sandals keep Me Coming Back For More... Videos,... Yeah, Videos...
Do you have a link for the kit?
They used to make a 1 1/8 headset for 1 inch frames.
Thanks for this. Working on my single speed road bike and realized I might have to change headset types to get a lighter gravel fork on it. You showing everything made it clearer. Now I know at least what I'm looking at spec wise.
My midschool Freeagent stock forks actually came with an integrated race crown, I guess it was ahead of it's time lol. I did cop the Mission conversion headset a while back and it was one of the more, bang for your buck, upgrades.
Thanks guys! I really appreciate you sharing your knowledge with us!
Tx you explained it wonderfully. Only wish that you would have Installed it on a frame. Watching your assembly videos is so satisfying.
Im looking for this video for a long timeeeeee! Thank you for the information.
i give thumbs up for the bearing grease you use in your hair
Dude!! The explanation I’ve been searching for!
You all do good work. Thank you.
been riding for 25 years, and went to mtb recently what this guy is saying is straight true everyone. Very good sound advice!! Did you see the zs44 ec44/40 press in outer for bottom cup to take a tapered fork, and put it onto a non tapered frame. its really cool look it up :)
Thanks, just got this set, now I'm gonna go and convert the old school non integrated headset into this magic piece :)
Thank for the knowledge you consistently provide us all.
🤛🏼💜
The Tange MX 320 headset with precision bearings works perfectly with old school 1" threaded forks. I would only have a bike shop install it, because you need to press in the cups, it won't survive banging or a vice, needs a Park Tool headset press to install. Smooth as butter.
Thanks you guys are the best I always wanted to buy this kit but I didn't know what was included,so now I know an ill buy it
Literally have learned everything I know about bikes and their parts cause of this dude. Always has the most tedious random information needed when you’re stuck on a build .
Thanks man
Always coming with best timed videos. I was just thinking about this. Keep it up phu, max, and Alfredo. Liked
💜💜🙏🏻
I converted the headset on my fit series one using the Verde Neo conversion kit to fit my odyssey forks and it works very well.
Trying to do same but have OG forks for my series one. Do they have the race or no? Thanks
I love this shop!
Txs that was real helpfull!
Finally. Thanks guys. Wanted to do this for a while. Got a mongoose I wanna convert.
What kind of Mongoose?
@@Patrick_Andrews917 the 720. Frame still holds up with the rest. The pedals and tires gave out quick tho. Went with odyssey stuff. Kinda tired of servicing the loose bearings tho so I wanted to convert to sealed.
Excellent video thanks Alf & Phu 🏁🏁👍
I made a vid about this topic. But Phu laying down more knowledge. I haven’t been able to work ona bmx in so long. This has really got me itchin to just tear my whole bike apart just to regrease it.
I remember i had to make my own headset for a dyno compe that was all loose ball bearings in a oversized 1 1/8 headset bearings and cups with a plastic compession ring from a conduit or something in my junkbox that made 1 inch threaded gt forks fit perfectly. Man i Wish they had these headsets,adapters,and converters like 15 years ago.
idk why but i think i like the tech videos more than riding clips. i think it's cuz there's so much riding and less tech reviews.
I still run my Chris King headset on my mid school Hawk with Brand X forks and bars,Jad cranks with Crupi hubs and pedals . Now I ride a custom FBM before they closed shop. Can you do a video on a Trails style of bike and then park street ect...... the difference in the 2 and why. PHU you the man
I think the mission sti headsets been out for a few years. But it's definitely perfect for wanting integrated headset. Used it on a few bikes
Great video! Was looking at that headset to convert my 2005 Haro F2! Haven’t rode in about 15 years and pulled out my old bike and started looking into upgrades. Lots of new brands out there now. I feel lost. lol
I feel your pain
Good job!!
It’s cool that you did this video so people can convert their old parts to new parts. Cause once they stop making the parts the frame isn’t any good anymore.
Do a shop tour video showing what you've got in stock behind the counter on that wall and in the display cases. Also the completes in stock.
I had it thinking too maybe 10 years ago.
Great Video!! I got a challenge for you, What is the lightest modern freestyle complete bike can you make? You should do a build video with a parts list...
Love this channel!!! I'm 46, retired military and now building a 2020 Skyway T/A REPOP........Will this mission headset work??
Hello Sir! Thanks for sharing your knowledge and experience. Are you familiar with any conversion kits or or conversion adapter / headset kits that would allow a Trek SLR stem and bar set to fit any road 28.6 headset?
Thanks in advance.
The new bikes make it so easy, classic is like a puzzle
Shout out to my local bike shop Powers BMX that hooked me up with one of these.
Great information!! So is there a way to run threaded forks on a integrated frame??? Don’t judge me I’m just asking the question.
Great video! I'm trying to convert my 93 Mach One with a new headset. Will this Mission Conversion headset fit into the Mach One head tube? Thanks!
Sealed bearings on my circa 2000 frame just like a mountain bike 1 1/8 set up but the head tube is straight. Only thing to watch out for is some of those mtb branded headsets can be too fat if you want to run a gyro. I think the angled race being built into the fork is a bad idea. Taking a race off and putting a new one on can be a pain sometimes but it's got to be better than replacing the whole fork. Both of your frames flair out at either end of the head tube. Aren't the both integrated but one takes loose bearings and one sealed?
The consistency
I been binge watching this your a smart dude dude you should do some wide hubbed bikes to like a Different chapter there ain't much out on them type of bikes jus saying tho
So my 2023 Sunday primer has sealed bearings on top and plastic caged bottom bearings. Am I able to just convert the bottom to sealed if I remove the race on the fork and in the steering tube? Or do I have to do a few other mods? I want to get different forks and might as well go full sealed when I do
Yes!
Yes you can semi sealed headset I’ve used them several times
My old fsa pig headset had sealed, they it worked great.
Those were bomb proof
Hey Fu do you have to cut all new forks down to size or can I shim witch is better?
Is there a 32.5 press fit cups that fit in 1-1/8 fork? What have to look for in the headset? It doesnt matter if it is sealed bearing or not. Thanx.
its like legos but bike forks haha
Is seat hight important? I usually ride with my seat pretty high compared to what I see online but recently I’ve been getting better at hopping higher and found myself getting hit in the nuts with my seat. Am I doing something wrong with my hop or should I just lower the seat
I've been trying to look for a integrated freestyle headset with a hollow Bolt for the front brake set and I can only find it in Black, is there another company that makes them in different colors like white or yellow, with a white or yellow cap?
can i ask some question?i have an old japan folding bike and i want to change its headset what can i do to change it or what other types of head set can i use?the one that i have now is a threaded type and the size is 22.2
Have a question on Inner tubes. Heavy duty vs Non. Heavy duty soo much thicker. Is the weight worth the protection? Pinch flat and thorns
Id be mad curious to hear about parts or conversion kits that could fit on old road bikes, for example i know some people will use a euro bb to fit bmx cranks on an old road frame to build just a fun bike or for fixed gear especially, lots of fixed gear riders like bmx parts, no one has a channel talking about what can be used from bmx parts.
Video about hydraulic brakes. I just rebled my brakes 3 times just to find out the rotor was making it squishy.
The mission conversion kit is awesome but you may want to have extra spacers and you have to upgrade the forks like he is saying.
Wanted to up grade my old school 93 Dyno. My og fork won't work with this set? It's the og 4130 fork and I'm I'm trying to retain as much old with the new tech.
Any conversation headset and bearing kits for older 1inch threaded frame for 1 1/8 threadless forks?
Shot for the video and explanation, so the Mission conversion kit is only for frames with 1 1/8" inch headset. I have a Mongoose Supergoose Black Classic Repop which according to the specs is 1". Is there a conversion kit available for 1"?
I used the 1” ACS main drive on my 99 gt.
Good video to watch on the toilet. 🎉
is this only exclusive to bmx frames? i wanna upgrade the fork on my road bike with 1 1/8 headset
You mentioned two types of crown race’s.
What’s the name of the crown race that’s for integrated bearings and ball bearings?
Much respect to the whole channel! I just said everything you don't, no disrespect whatsoever
Do have a video on placing the cups into the old frame
I have a question, can a Star Nut headset be installed on a INTERNALLY THREADED forks? meaning the forks have threads but they’re inside the steering tube. its from a Haro 26”. I wanted to change the headset but ran into that issue. Please help? thank you
what frame is the chrome frame you are using as a demo ???
How difficult is it to get the old stuff off and new installed. Special tools, or is there a good d.i.y. method for removal and install? Thanks 🤙
you can hammer out the old cups with a flathead screwdriver, as for installing the new cups i recomend getting a bolt styled press as hammering them in can damage them if you slip up.
Can you get the conversion cups in chrome? so tired of black everything fashion :D
Can you convert an integrated to 1.5” tapered??
U will become great 👍 thanks phu u da best
I need one
Do they not make sealed press cup bearings anymore? I've been running an FSA Pig DH Pro on my mid school bikes since I built my first bike in like 01.
Damn! I had that headset! 🔥
@@Fifty_bmx I checked right after I made the comment. They still make it. 16 year old me had to have it because that's what Nyquist used, and he was doing bars with, into, and/or out of everything before everyone else.
@@sepherus good times 🔥
Where can I buy that kit?
Can u put an integrated conical headset on a regular integrated frame 2022 cult control
Can this mission kit headset fit on a mtb fork/frame?
Where do I buy this and does it come in white or blue?
Great job! Those epic tees for sale?
what about tapered headtube?
is there a 1inch conversion headset?
"Integrated bearings" You might have a million dollar idea right there Phu.
Wow 🤩
@@AlfredoMancuso that's a weak ass reply😂😂
Would this work on a 90's era mountain bike ??
Where is your shop???
So I went cheap by buying the chrome cromoly rant twin peak forks but my wheels won't fit my bigger wheel axle won't fit and my compression cap don't fit plz help?
Headset don't fit either.
Im not a rocket scientist but for some reason it seems like the integrated headset bearings don't fit in my Subrosa Sonos XL. The cups are machined in but if I put those bearings in I still have play after everything is tightened down. I made sure I used all the pieces but I'm still having problems. I've been away from BMX for a few years due to injury and a lot has changed so I'm kind of lost. Please help me out here
Or just get any ec34 mom headset that uses 41.8mm sealed bearings.
Phu sho!
🙏🏼
What brand is this?
How much is a mission int headset!?
Anyone know what to use with a 52 chainrin?
Most integrated headsets have lower races included
Sir.how to order online in what name of item?
What will I need to convert my old Mongoose Villain frame. I am rebuilding it for my Granddaughter! Let me know what I will need to convert headset, and a new bottom bearing that will accept a 3-piece crank.
Your next mission, should you choose to accept it: Put 1.5 (39.8mm) tapered steerer fork in 1 1/8 traditional frame! Thank you are Amazing!
What up 🤘
hi daft question probably but my bmx 20inch tyres say max load 165lbs…. I’m 180lbs… is that ok or not??….please go easy guys i know its a daft question but I’m just a newbie