Making a Nice Knife from Trash materials only
Vložit
- čas přidán 23. 02. 2024
- I challenged myself with making the fanciest knife that I can , by using only scrap materials lying around my house. I forged the blade from old wagon wheel and piece of broken bearing and made the handle from piece of old board. I also tried some metal engraving on it. The end result is not perfect as usual , but I learned a lot.
- Jak na to + styl
From his videos and comments/reply’s, he is one of the most skilled and interactive(also nice) CZcamsrs ever
Are you kidding me?!? That is amazing work! I love how the metal bits came out! Really, really cool! Just so cool what some talented people can make from 'junk.' 👍🏻
thank you friend , glad you like it :)
Quality work friend...👍. I would buy it..!!
I like it a lot! I see it as minimalistic approach with use of traditional elements!!
The most beautiful knife I have ever seen.
I'm as a metallurgist usually quite critical about such a CZcams knife making but this time definitely thumbs up. Solid work and very nice knife design. This guy knows what is he doing.
Thank you , I'm glad to hear this. I try to be entertaining but not to go too far :)
Other than pourous steel, unstable & worst wood to use and off center edge geometry, sure it looks good. 😂😂😂😂
@@WhyamIstillwatchingyoutube Dude it is just cutting tool, there is no need to make atomic precise.
I was critical before too for knife making, also quite obsessed with steel specification but I realize that is just a tool, no need to use perfect or super duper material. Because anybody use them for a life time except you are a butcher.
There’s nothing at all wrong with this lovely knife. Worst handle material? That would be duct tape. Which is probly what that troll would use.
@@WhyamIstillwatchingyoutube unstable and worst wood would be pine, even in that instance it would still fit in the context of the video, "making a nice knife from trash materials". the point of the video was using whatever he had lying around. heirloom quality knives from years past didn't have cruwear, magnacut, or k390, etc, they had blister steel then crucible/ cast steel. although the crucible/ cast steel process further refined the blister steel process, the carbon content of those blades varied greatly as the steel wasn't able to be totally homogenized on a chemical level like it is today. the steel used in the video is far better than anything they had back in those days, it is more than adequate, and the point is to show the barrier to entry in knife making isn't high. people like you will comment things like this, but i GUARANTEE you have never made a knife. keep on hating from your basement guy.
Отличная работа! Нож красивый и по форме и по стилю.
I watch a lot of knife making videos. THIS ONE I'd pay money to have! Great job!
Thank you :)
Very clever appointments.
Well done!
Шикарна работа
Лучшая что я видел
Видно что мастер кайфует от работы
Я бы себе в коллекции такой нож не отказался иметь. Лучшее видео что я видел. Мастер просто супер!!! Сделал прям от души, я смотрел не отрываясь от экрана. Великолепная работа! 👏👏👏👏👏👏
It couldn't be better than this! It's a wonderful piece of hand crafted artwork, it's individual.
Great work!! 👍🙂
Una belleza de trabajo. Felicitaciones. Tiene un nuevo suscriptor. Saludos desde Uruguay. Miguel
One of the few unique knives I’ve seen in long while
Excelente trabajo!!!
Very nice! Great work
Hey you do awesome work!
Here’s a pro tip. When sanding the handles, put duct tape on the back of the sandpaper. That’ll keep it from tearing.
thanks for the idea, I will try it
Beautiful piece. Thanks for sharing the build with us.
For being a completely upcycled project, or even for not, it's beautiful. It's not overly lavish, or bougie, but it's pretty and also useful. So many pretty knives arent functional as well so, well done.
Thank you , I try to make functional things and add a little bit of decoration :)
I couldn't agree more. I roll my eyes every time I see some knife that has very limited functionality. I prefer to be able to use it, not just show it off.
Hey, I collect knives. You ever want to make an EDC somewhat sexy looking EDC knife for me, that would be great @@RustLegion
Well done Master!
Very great knife. Congrats 👏👏
Thats a sick piece👌Your'e really good. Thanks alot✌
Very nice knife and great skills!
Μοναδική και υπέροχη δουλειά. 👍💪
I love the ''hamon'' on the blade, gives it a distinct vibe.
Props to you for making something out of nothing!!!
a traditional hamon is intentionally done with clay to keep the spine soft and the edge of the blade hard, makes for a tougher blade and results in a similar color variance. the variance in color in the video is from the 2 different types of steel used for the edge and the body of the knife. does look like a hamon though so i get the confusion lol
Браво - художник ! Не останавливайся - у тебя талант .
Excellent job young man!
Thank you . glad you like it :)
Du GRAND Art , c'est superbe avec des matériaux de récupération ! BRAVO
GREAT Art, it’s superb with recycled materials! BRAVO
merci :)
Ламинатный клинок, комбинированный больстер и деревянная рукоять. Произведение искусства!
Hi body😊 i am 15 years Old have allways loves colecding knives have watch people like u for meney years have allays dreamed of haveing your skills but now i have been makeing knives for 1 year and acely Got ok good at it good anoth to i run a small bissnes/shop whereabouts i sell my knifes with sheaths all of it i have learnd from u u insperet me to begin and i wanna sat ty for that ceep om the amazin work your awsom❤️❤️❤️
Excellent work.
I have never done forging but I think I will try it. Well done 👌
if you have the posibility , try it but stay safe :)
One of the most beautiful knives I have ever seen. Thank you!
glad you like it and thank you for the support :)
This is Absolutely Beautiful.... and a Really Practical knife as well.
An Amazing piece of work!!
Trash to heirloom. Absolute perfection sir.
The knife is magnificent but I also wanted to compliment your editing skills. I was glued to the screen for all 20 minutes. You do a great sense of pacing, when to insert humor, when to annotate with text. I’m guessing you spent as much time on the video as you did on the knife-and both are masterpieces.
well done from britain!
Greedings from Greece, amazing job mate!
Hello my neighbour thank you and greetings from Bulgaria :)
Actually inspirational work there sir, makes my hands want to try
Great job mate , keep it going
Ficou muito bonita Parábens pelo trabalho!
Man that blade though
FAWWWWKKKKK
Very VERY nice 👍 🤯
BRAVO Master!!!
Impresionante, una belleza el arte que le pusiste a ese pedazo de Metal
You scribe a line with calipers , and it makes the piece of steel break in half ? Hilarious and thanks. Great looking knife.
Work of art that mate🙌
I keep coming back to this videos because the knife turned out so simple and beautiful, i would consider this a crowning achievement if i had made it sir
“It could be better” bro made a masterpiece using jury rigged tools
Excellent work. A knife worthy of a king !
You do nice work.
Sold. I'd buy it with my hard earned money.... Subscribed.
Beautiful work My friend and congratulation for this knife. Warm greetings from Uruguay
Thank you friend , greetings from Bulgaria
Amazing work, very well done, love it 💪👍
it's not the knife man , It's my supper human skills :D (and some video editing)
Incredible as always. It's a pleasure watching you work!
thanks my friend
Fantastic work
Incredible. All from scrap and reasonable tools in a shop.
Just amazing. I would make (I would buy a no-frills model)
. No carving no engraving no stippling no ferric chloride on the handle no fancy butt plug.
Forged polished steels and oak with tung oil wax either both.
The reverse Hamon show the perfect blend of soft hard steel.
Nice work all around.
I buy super simple very sharp knives and I USE THEM ALL HARD
Посмотрел с удовольствием. Классный нож!
Vc é top top galáxias vixi que obra de arte grande abraço fica com Deus daqui de cajazeiras Paraíba Brazil
That's a mighty fine blade right there.
Man, that Anvil of yours looks brilliant, it seems bigger than most you see, great video by the way, keep up the good work, I'll keep watching and recommending you.
Thank you , the anvil is 60 kilos and it works very well. Glad you like my work :)
A beautiful, stron, useful knife. I'm impressed!
😢really beautiful❤
Meus parabéns uma obra prima, assistindo seu vídeo aqui no Brasil
Nothing quite as fulfilling as giving something old a new life. Your work is incredible, i really enjoy it everytime one of your videos pops up
Thank you mate , I'm glad you enjoy it. It was always more dun for me to use old junk as materials :)
Awesome job with the limited resources available 👍
Damnnnnnn i watched all video. Amazing knife!!!! Love itttt
Thank you and glad you liked it :)
Это шедеврально!!!!
Делать спуски в ручную на гриндер ещё и на весу. Это мое, Уважение!
Брово мастер 👍👍👍👍👍👍👍👍👍
Nice work
Sometimes less is more
😊
Nice talented work! You’re blessed to facilitate a lot of individual trades. It was a pleasure watching & no monotonous monologue. 👍👍
It's beautiful ❤
I simply would not wear those crocs and do metalwork. I remember being in school in welding class. One of the molten drops splashed from the weld and into my shoe. It was very small but the pain taught me an unforgettable lesson.
cool knife and nice trick with he rope to get the center line, I need to remember that one
yea very useful trick. Some people can do it just by eye , but I am not one of them :D
I really like how the handle turned out, I bet it feels nice in the hand 👍
thank you. It has a nice and secure grip indeed.
Beautiful knife, and excellent video showing the process.
Thanks for sharing!
Quite nice 👍
WoW maaan! You did great! This is the best forge I have ever seen! All of my family members (except of me women), said this was great! I cannot add nothing to that!
I bet the neighbours were chatting about what grinder You will use - the real Claryx or the other one :D Cheers mate!
Nicely done, the flower on your handle butt cap is the same flower I use on my makers mark for my knives. A dogwood flower.
Magnifique ce couteau ! Bravo !!
Merci beaucoup :)
Beautiful metal work on the blade. The finishing touches are out of this world, congrats.
Keep the good work amigo, you are good.
Greetings from Toronto.
Veramente un bel coltello da caccia, fatto con tutti i criteri giusti, peccato non poter averne uno. Complimenti a questo artigiano
Excellent work you have found art where there was none only a true artist can do so. Subbed.
Dude! that thing is awesome! I love giving new life to what other's would consider trash! Great work! please keep making awesome things!
Beauty knife 👍
You should put your name on it and sell / ship internationally.
Very nice!
Holy sh*t....that's a beautiful knife....you got some excellent skills m8....great job!
Ваши ножи это искусство 👍👍👍
😑 Am Anfang dachte ich, das ist wieder eines "ich mache aus Schrott Gold" Videos, die nichts taugen.
Aber als ich sah, wieviel Geduld und Feinheit in der Arbeit steckt, war ich fasziniert!
Danke für diese handwerliche Begabung und das du dein Können mit uns teilst ❤
Ich freue mich, dass es Dir gefallen hat. Vielen Dank für den netten Kommentar.
Looks great to me
Every action and decision is very well thought out. I love the way you use scrap metal for every project. You're the guy I want to be my neighbor if we ever have an apocalypse and restart mankind again 😂
haha thank you , I make knives from brand new stock materials too , but using old junk was always more fun to me :)
I think this is some of your best work. Just keep loving the process...
Beautiful knife design! Love the Sanmai blade when etched being able to see the lamination line 👌🏻
it looks really nice and sharp, I think a better-harder piece of wood handle would have been better 🔪🗡😎👍👍
What a beauty you made there, well done man!
Bellissimo complimenti 👏🤙
Шикарная работа!
Very good work! You have done it all right! Congratulations!
thanks :)
Beautiful knife. Thanks for sharing.
Πανέμορφο τα σχέδια που κάνεις στα μαχαίρια είναι υπέροχα.
Belíssimo trabalho!