Creating the Anamorphic Look in Post! Aspect Ratio, Lens Flares, Distortion and more.
Vložit
- čas přidán 25. 06. 2024
- Get my guides on anamorphic, anamorfake, USSR lenses, and more!
www.e-junkie.com/anamorphic
Check out the Anamorfake It Guide!
anamorfakeit.com/
00:00 - Intro
00:46 - Vashimorphic40
01:12 - Aspect Ratios
02:37 - Frame Guides and Crop Marks
03:24 - Masking vs Cropping
05:33 - Distortion
08:26 - Oval Bokeh
11:15 - Lens Flares
14:09 - Conclusion
You want the anamorphic look, but you don't have money to burn and you don't want to spend too much time learning to modify lenses. These are most solutions on the market for anamorfaking your visuals - and they're all cheaper than anamorphic adapters.
Cine Packs Website
cinepacks.store/
Great as always mate
The LEGO Movie was entirely 3D-rendered, so they could achieve oval bokeh with a single click (by specifing the aperture aspect ratio).
The oval bokeh was achieved in the compositing stage not the rendering stage, where the raw exrs did not have lens effects like DOF and bokeh. They used a lens kernel in Nuke, which means it is done similarly to real world spherical bokeh to anamorphic (though there is no DOF in the first place, so no layering of blur effects).
As someone who sometimes watches content on his phone, I HATE when people use letterboxes! Let alone all those who use an ultrawide monitor and now have letterboxes on all 4 sides - thanks for mentioning that.
Super awsome Man!!! Thank you!
thanks yeah these working ..enjoyed episode..
Thanks! Very useful, as always:)
Thanks for this video
I think resolve 18 has some useful tricks for rotoscoping such as the new depth map plug-in or the one in the subject detection section in tracking
I have unfortunately had to roto to add ana bokeh to shots before. One way to get rid of the edges not being perfect is to scale up the subject/FG element by a little bit.
P.S. Like you mentioned, to everyone, please make this your last resort. Do not and I repeat, DO NOT rely on this method for your entire project. Even if your vfx buddy says he can pull it off.
We did a project when we faked bokeh, but just the light sources. Via a layer that you luma key, then scale on y axis. Worked ok for some shots
That's hardcore. If you have a link to it, I'd love to see! :D
Just need a tutorial
Have been waiting for this video to show up at the top of my watch later for way to long.
That distortion is surprisingly convincing, and short of paying 45k for an Elite or Cooke anamorphic it might be my only option. Just have to figure out a way to have it work in C1
I created with the soligor 35-70 f2.5 I love it
I thoroughly enjoyed this episode, especially the maths to work out Aspect Ratios. This episode helped to consolidate much of what I've tried to remember from your Cookbook episodes.
I had a go filming my first ever small CZcams episode of this year's Solstice Sunset with my Siuri 50mm lens. Not exactly an edge of the seat subject matter, by any stretch of the imagination.
However I went through most of your Cookbook episodes again trying to get my head round the maths of Aspect Ratios. But I still don't fully understand. Its a learning curve. My brain still hurts. This episode has helped the information to stick in my brain a little more. I'm just confused about how to adapt the footage in Resolve. I don't really know if I should use square aspect pixel ratios or cinemascope pixel ratios for the squeeze factor of 1.33x.
I'll be honest I don't even fully understand the 1.33x squeeze. I gather the 1.33x is for a sensor with 16x9 aspect ratio. However used my GH6 in open gate which is not 16x9 and hope to work this all out one day in the with aspect ratios and pixel heights.
Looking forward to your next episode. 😀
wow wow wow! wow wow.
Are you gonna update your guide with how to do distortion in resolve through the anamorphic settings in the lens distortion tool?
baita conteúdo
would be cool to see an tutorial how to do in post in davinci.
4:50 the thing is, there is a defined standard for 4096 wide scope, which is 1716 and not 1712. Wrong math, sure, but still the case. BMD also did their own math instead of reading any paper when they implemented the 1712 height in their 4K Pocket. So what's more important, serving standards or doing more accurate math? That's for each one to decide. But doing the math means that if you did a DCP from it, you either add tiny black bars or you have to scale up ever so slightly, gaining some nice little filter hits.
10:40 also, props for rotoscoping in Resolve. Probably the worst software for this, ever :D the halos on the shoulder could be eliminated easily with a simple pixel spread, no idea if Resolve has something for this. Then again, Resolve is terribly for this and Fusion bundled. Not sure if they implemented one yet, but I made a Macro some years ago
Good points on both! I did not go after the standard (DCI 4k Cinemascope), just went for the best byproduct of 2. Also good consideration on what's more important.
Doing it in Resolve was ROUGH. I managed to do some other stuff in AE using Mocha and that was a much more pleasant experience. hahaha
How did you customize the shape of the Resolve lens blur?
Hi! Any advice on an Android app to desqueeze video? For when I don't have a computer?
Hi Tito! This might sound a little crazy, but do you know of any way to mod a lens so it can have swirly bokeh towards the edges without using the method of reversing the front element?
Wow, great question. Nothing I can think of... :(
@@AnamorphicOnABudget I've tried researching but nothing comes up, I'll keep digging into this. Thanks! :)
10:50 it would take you 10s in davinci resolve
I have black corners, can I fix it? Please help.
Easiest solution: scale up the footage by a few percent until they're gone.
Trying this out in Final Cut Pro X, and to my horror I'm discovering that FCPX has NO WAY of distorting an image!? There is no built in way of warping the corners and after quite a bit of googling I haven't been able to find any plugin that allows you to do this. This seems like such a basic feature - if anyone knows of a plugin please let me know.
isn't there a fisheye effect built in? i haven't used FPCX in a few years but i feel like i remember there being a fisheye filter.
@@zachreichgut There is a built in fisheye effect but it's mostly useless for anything other than creating a poor looking distorted fisheye effect. There are no settings to tweak and it distorts the image heavily in the centre.
😲
What is your name?
Heisenberg. Oh, sorry, wrong answer. Tito Ferradans - czcams.com/video/WaczAL8GhNM/video.html
No, it's 1.78 times AS LONG, or 0.78 times longer. If it was 1.78 times longer, it would be 25:9. That's what those words mean in the English language, no matter how many people insist on using it incorrectly. Just saying, seeing how you go to the extent of calculating ratios where the actual understanding of numbers and figures matters, instead of the one you can still drawl after your twenty-ninth can of 'murrican "beer".
Good correction there! I'll keep an eye out for that. It's something that has always confused me. :P
@@AnamorphicOnABudget I … I appreciate that more than you might think. Thank you.