Video není dostupné.
Omlouváme se.
ZF6HP26 Solenoid Set Replace, Valve Body Tube Seals, Bridge Seal, Vacuum Test Solenoids 6R60 6R80
Vložit
- čas přidán 30. 10. 2020
- Ford Territory ZF 6HP26 6R60 6R75 6R80 VW Audi 09E Automatic Transmission - how to air pressure test clutch packs, replace solenoids, how to remove mechatronic connector sleeve, remove valve body tube seals, bridge seal and then lower valve body to remove mechatronic unit, also known as leadframe connector, molded lead frame connector to access solenoids, how to vacuum test solenoids for leaking on ZF6HP26 6 Speed Automatic Transmission ZF6HP BMW Bridge Seal
ZF Lead Frame Removal
#ZFTransmission #ZFAutomaticTransmission #ZF6HP26LimpMode #ZF6HP26Solenoid #cars #automotive #transmission #gearbox #automatictransmission #autorepair #auto #diy #tutorial #howto #yepthatsit
Showing how I do Repairs, Mods & Servicing - NO FRILLS.
* The use of this information is at YOUR OWN RISK & LIABILITY. NO Warranties are Expressed or Implied. Videos are for entertainment purposes ONLY !
Hi, if a YepThatsIt Video has helped you out in ANY way or saved you some $$$, please consider helping SUPPORT and motivate us to make more.
BUY ME A BEER ! CLICK HERE www.paypal.me/BATS189 ( send as a gift otherwise PayPal will take out a fee )
For more technical questions, we can share pics/info/vids/beers via our facebook link / yep-thats-it-103051017...
* If you like our videos PLEASE LIKE, SHARE & SUBSCRIBE to encourage us to continue to make videos....much appreciated !
If you don`t like them PLEASE recommend them to your enemies !
Don't forget to also hit the bell icon ( top right ) for ALL notifications. CZcams has changed what they show subscribers
See also :
• ZF6HP26 6R60 6R80 09...
• ZF6HP26 / 6R60 Auto Se...
• ZF6HP26 / 6R60 / 6R80 ...
• ZF6HP26 / 6R60 / 6R80 ...
Ford 2WD
Ford AWD
BMW
Jaguar
Land Rover
ZF6HP26 Lead Frame Connector
ZF6HP LeadFrame Connector
6R60 Lead Frame Connector
6R60 LeadFrame Connector
6R80 Lead Frame Connector
6R80 LeadFrame Connector
Lead Frame Connector
LeadFrame Connector
6R60 Transmission
6R80 Transmission
09E Transmission VW & Audi
•2004-2007 Audi A8 D3 4.2L V8 (With 6-Speed 09E Transmission)
•2008-2009 Audi A8 D3 6.0L W12 (With 6-Speed 09E Transmission)
•2007-2011 Audi S6 C6 (With 6-Speed 09E Transmission)
•2007-2009 Audi S8 D3 (With 6-Speed 09E Transmission)
Some Vehicles Running the ZF6HP26/6R60/6R80 6-Speed Automatic Transmission
◾2001-2008 BMW E65/E66 7 Series
◾2002-2005 Jaguar XK8/XKR
◾2003-2008 Jaguar S-Type
◾2004-2009 Jaguar XJ
◾2003-present BMW E63/E64 6 Series
◾2003-present Range Rover
◾2003-2012 Rolls-Royce Phantom (2003)
◾2007-present Rolls-Royce Phantom Drophead Coupé
◾2004-2006 BMW E53 X5 V8
◾2003-present BMW E60 5 Series
◾2005-present BMW E90 3 Series
◾2005-present Land Rover Discovery
◾2005-present Ford Falcon (BF, FG)
◾2005-present Ford Territory (AWD Versions)
◾2005-2008 Lincoln Navigator
◾2006-present Jaguar XK/XKR
◾2006-present Range Rover Sport
◾2007-present BMW E70 X5
◾2007-2012 Maserati Quattroporte
◾2008-2012 BMW F01/02 7 Series (except 760i/Li and Hybrid 7)
◾2008-2011 Kia Mohave
◾2009-present Hyundai Genesis V8 4.6L
◾2009-present Jaguar XF
◾2006-2009 Bentley Arnage
◾2008-2011 Bentley Brooklands
◾2002-present Volkswagen Phaeton (Typ 3D)
◾2003-2009 Audi A8 (D3, Typ 4E)
◾2003-present Bentley Continental GT
◾2005-present Bentley Continental Flying Spur
◾2006-present Audi S6 (C6, Typ 4F)
◾2008-2010 Audi RS6 (C6, Typ 4F)
ewffiHwh3792wyp9y2yr723#%%&%ÊADG$^^$$^#$%^$%&
*** For more info/help please read through comments and responses and check out our other related vids czcams.com/play/PLQLkuOdKuFot2BAqwwKzgyyIEUJ2Z_Er9.html cheers
This is the best ZF maintenace tutorial by far. thank you
Another masterpiece. Thnx a lot for the loads of information.
cheers if deserves beers
Great and detailed video! Thanks.
thanks & cheers
Best video thanks 👊😊
thanks and cheers
huge thanks for this its going to make the mechatronics change over im about to do much more simple !
glad helped, few beers always well received...link is in description. thanks & cheers 👍
Very helpful sir!thanks for the knowledge
thanks and cheers
Excellent Video - Very informative :-)
thanks & cheers
Quality video brother! Have a six pack 🍺🍺🍺🍺🍺🍺
Always love your videos 👌. Buy me a beer on it's way to you 👍.
you are literally too generous, cheers and cheers bloke ;-)
hello...2006 jaguar s type r...zf 6hp26....no codes ever....trans is beautiful except for one thing...at wot 2 to 3 shift the rpms flare wildly like it was kicked into neutral...let off throttle and reengages and drives great...solenoid 6 shows 0.42 as max amps.or 0.05 when not activated....all other solenoids will be either 0.85 or 0.05.....repair plan is as follows...replace bridge seal and 4 tube seals...replace all 7 solenoids....replace all end plugs...replace pan filter and fluid and sealing sleeve...i have cleared adaptations and done successful drive cycle 2 times with no change before deciding on repair plan after research including this very helpful video of yours....i am the owner of car and do the work myself....am i on a good track here and any other suggestions....thanks....forgot to add the fluid and filter have about 40,000 miles on it and the adaptation millibar readings are as follows...clutch A=400...clutch B=280...clutch C=400...clutch D=143...clutch E=400..strange how 3 clutches are the exact same and just barely over the desired limit....again no codes ever....thanks again
hi, you will have to contact me via our facebook link in description. cheers
Awesome video. I am attempting to do the seals tomorrow on a v8 Fairmont Ghia. What size torx bits are required? And is there any torque requirements other than the one you showed? Thanks again and I will check your playlist!
Great video, currently fault finding and researching a zf8 shift issue in drive in top 2 /3 gears, shifts down then back up gears when putting some throttle on, sometimes with a slight thud,
hi, for technical questions please contact us via our facebook link in description and don`t forget to bring some beers. cheers
Brilliant vid mate, love the detail, could you tell me where to get the zf parts (pan solenoids and sleeves) from ? mines the xjr Jag version.Cant seem to find much over the pond in NZ . Much appreciated cheers
hi, contact me via our facebook link in description. cheers
Best video on the zf auto nice job where can I buy parts for zf autos I’m in Australia 🍻
hi, contact me on our facebook link facebook.com/Yep-Thats-It-103051017785435 , we can exchange info, vids and beers on there. cheers
Great information, I was just wondering if you have to reset the tcu via software and pc, as the transmission has had work done. Is this correct. Everywhere I read they are resetting/clearing adaptions on their transmission some even after an oil change let alone changing out solonoids etc otherwise the trans may not function properly....... I've got a Ford Territory 2010 ghia 6 speed and I'm about to do this service as the symptoms include problems changing smoothly and over reving also issues with slipping when cold in drive taking off so I'm doing the solonoids and Adapter Seal Valve Body Sleeve Connector Seal kit for zf 6hp26, do I need to reset adaptions after this kind of service. Or will the car adapt. Any advice will be appreciated. Thanks for your vids. They are just fantastic. Steve pps I've read the comments and you already answered my question. Thanks anyways
hi, try first. if it is shifting really badly then a reset/relearn will help but it should relearn on its own with some driving. just be aware to relearn has to have no fault codes and be at operating temp. cheers
Hi Buddy,
I have a BMW E60 2008 with the same transmission.
Mine does not want to stay in park sometimes and now today the transmission got stuck in gears and overheated.
I will change the oil, pan with filter, the 4 rubber sleeves, the square seal, the electrical plug sleeve and the solenoids.
With how much air pressure did you do the test on the clutch in the 4 holes, how do I know if the clutch packages are ok, can you just hear it? how does it sound when they are not ok?
Do you have any further advice, I think your video was absolutely amazing, very helpful.
Thanks looking forward to your reply.
Cheers.
Mike
hi, for more technical questions, contact me on face book link, we can share pics & vids & beers on there. cheers
Wise move to chase out the 6x1mm threads of the trans before refitting the pan as the threads cold seize and bruise quite easily
cheers for that
Great video mate, would you recommend doing the Sonnax Zip Kit at the same time? Cheers
hi, depends on the mileage. cheers
I did a service on mine, new filter and slide, mine took near enough to 5 Ltrs.
make sure you check at 30-50 deg c. cheers
Hi!
I have a 2012 Land Rover Lr4. Just changed the solenoids, watching your video. After putting everything back on, the car says the gearbox is not in park and would not start.
hi, recheck your work and check you have aligned valve body selector with selector on transmission. cheers
My zf6 in my xr6 turbo is flaring in 2nd and 3rd. Any recommendations or videos on how to fix?
hi, thought there was a playlist in description? czcams.com/video/ydn8qkEewSk/video.html czcams.com/play/PLQLkuOdKuFot2BAqwwKzgyyIEUJ2Z_Er9.html might aso help to read through past comments and replies. cheers
Hi mate I'm have a 2009 ford territory 6speed I just purchased I've replaced alot of stuff on it after putting a scan tool on it to see what is causing it to jerk while trying to sit on speed limit,could it be caused from low oil in the zf gearbox
hi, check all the basics first like fluid level etc. on these most often a cross leak on seals between valve body and case or contaminated or leaking solenoids. cheers
Hi guys - very informative.
Was the problem sorted with the work done?
Cheers
of course !
Hi! Great video. Im thinking of doing this service to my 2012 gen 2 6-speed Bentley. Its time for gearbox oil changen 90 000km. Do you think its unnecessary to change celeniods, tube and bridge seal? When i go from 2-3 i low rev in sport mode it changes harsh nothing in high revs and nothing in drive mode. Or should i stick with normal oilchange?
Do you know the service interval on oil for the gearbox?
Do you know the torque when tightning the other screws or is it the same for all screws?
hi, if trans fluid is old and dark, then likely seals have flattened out. the debris on magnet ( if fully covered ) will indicate that that debris has contaminated solenoids. chaeck out my other zf vids. cheers
@@YepThatsIt Do you know if i have 6hp 26 pr 32? Bentley 2012 last edition with 6speed. Do you lno the differance?
Lord Bentley you are a absolute tight ass, watertight.
I had a question I have a jaguar s type with same transmission and the connector going into the sleeve has fluid in it and tcm is not responding do you know if that would cause that?
hi, oil is not a good conductor of electricity. cheers
2007 Ford falcon bf xr6 zf 6spd auto .
Fault code P0735 .
How common and what trouble am I getting myself into doing the work myself .
hi, usually if one solenoid is contaminated, other solenoids will follow. the most trouble you will get is learning something new. saving some money and gaining a new skill or experience. cheers
Saludos que puede ser que el carro me golpea cuando paso de 1 a 2 marcha, y viceversa se cambio el aceite , los sellos y el puente no?
thanks & cheers 👍
When the solenoids leak is it just the o-rings that fail or internal failure as well ?
hi, you can easily check o`rings for leaks...test for internal leaking or coil failure or binding up internal components. often the metallic debris inside solenoid is magnetised and cant be removed without demagnetising and flushing or even disassembly of solenoid to clean properly. make sure you also warm up solenoids and check resistances.
cheers
As always very informative. Just a question tho, where do you get the solenoid and seal kit here in Australia?
hi, you can get them from us. contact me though our facebook link. cheers
@@YepThatsIt I cant find a link anywhere to your facebook page, can you post the link to it
@@YepThatsIt sorry nevermind I found it
ZF in Wetherill park Or Blacktown Sydney
Hey mate what scan tool do you use on AU falcon ??
we have autel and foxwell with australian ford and holden vehicles added. cheers
How do you know if your 4 mechatronic seals bridge seals need replacing ? my trans is doing this weird thing under light acceleration or driving up a hill lightly accelerating where the revs will go up and down 150-200rpm between 2-3000rpm and on the odd occasion open road driving if its in 6th and gets under load the revs will raise then drop then the transmission failure light will come up and go to 3rd gear... i drive around with a obd2 scan tool and at work have a Xtool d8 it never gives me any codes .. engine off or when it goes into transmission failure i leave the car running and connect the scan tool still nothing. i serviced the trans about 500kms ago the fluid was like dirty LF6 with the OE gasket (240kms) with a brownish clearness to it... next to nothing on the magnets, replaced the filter and a alloy pan gasket and filled with GF syn ts car engages and shifts nicely in every gear except 3rd to 4th (sometimes) when the cars been driven for about 40 minutes.. sometimes after going up it hill it will hold 3rd longer before shifting into forth and sometimes pickup revs during the change. manual mode after going up a hill if i put it into 4th it wont shift unless i back off the accelerator a little. i thought if it was a valve issue Xtool would have picked it up. and if it was a clutches issue i would evidence in the pan.
hi, the valve body to case seals flatten out over time and allow pressure cross leaks. the valve body bores and end plugs also wear out, you can install a zip kit. the solenoids and sensors get contaminated with fine magnetic debris ( a leaking solenoid will not give a fault code ), when you have valve body out, make sure you air pressure test the apply ports to test for leaks. having failed after doing all that work, then you will need to remove trans and rebuild. cheers
@@YepThatsIt thanks I'm going to drop the pan when i get free hoist at work and replace those seals and see if that works. if not i'll get the zip kit and solenoids i brought 20 litres of SYN TS when i first serviced the trans so i guess its getting a good flush that way haha... i also have a sneaking suspicion i have over filled the trans also i guessed the temperature being to lazy to get the temp gun. and the xtool isnt a wire one possibly the trans is acting weird after about 40kms cause the fluid has expanded and aerated?.... I should know better, i wouldnt do that to someone elses car but never do these transmissions. i love your videos you explain things really good its good when you are explaining the steps and why you do it like that with your experience and tips. most videos i have watched just say what they're doing without any detail
Hey mate, I have the 6hp21 in mine. I’ve been told no one does parts for them.. is this true? I’m after solenoid kit
hi, contact us via our facebook link. if you`re in australia we can post to you. we have genuine zf kits. just need to identify which one is in your trans. cheers
Hi this a great video where are you based?
hi, north east country vic. contact link is in description. cheers
I have a 09 Fg G6 5 speed that's done it's solenoids so the guy quoted me $1400 for new one and tranny flush is it hard to do this yourself or pay someone else to do? I've sourced the solenoids for $600
hi, best watch our 5 speed vids czcams.com/play/PLQLkuOdKuFovvYiynq3ee--0WSSUyeIxu.html cheers
So was it a solenoid problem or rubber seal leaking, that caused the surging/ revs fluctuating on constant throttle at 100kph ? John.
hi, putting in new solenoid had new o`rings anyway. often the solenoid valve wears and leaks, the orings generally harden and flatten out. cheers
@@YepThatsIt Thanks- John.
Hello brother, I checked the gear and found these errors: Shift 3-4 and Shift 5-6. I want to know where these solenoids are in the gear. Thank you very much.
hi, located on valve body, check out our other zf6hp vids czcams.com/play/PLQLkuOdKuFot2BAqwwKzgyyIEUJ2Z_Er9.html good idea to replace them all as they all will be contaminated. cheers
Bonjour monsieur merci beaucoup pour votre vidéo ça va me permet pour pouvoir changer les seloides sur ma Bmw645ci
salut, pas de problème et content d'entendre que ça aide. à votre santé
Do you reset the adaptations after replacing the solenoids?
hi, not usually, only if shifts are too harsh. it will readapt on its own over the next 100m or so. cheers
@@YepThatsIt Thanks for your reply. I appreciate you taking the time to respond.
Hi mate, I've just bought a mint condition BFII XR8 with only 54,000km on the clock.. I noticed that the ZF appears to lock and unlock the TC but only when foot is totally off the throttle under no load so while coasting downhill mostly around 70 to 80km/h you can see it on the tacho.. I've got a video on my channel of it doing this (it comes good once the ZF kicks back for engine braking and also comes mostly good after 10 to 15 mins of driving) what could it be?? I have a video on my channel of what it's doing Other issue I noticed is after a couple of km the shifts change and feel firmer -when it does this I notice that the revs drop as per normal when changing into next gear but a second later it drops ever so slightly again (this is possibly normal operation and just the TC locking up im not sure).. this is my 3rd low km ZF falcon and all 3 have been quirky at very low km.. Thanks in advance
hi, could be contaminated/sticky solenoid and/or valve? on these trans the seals between valve body and case flatten out as well, but that all would be unusual for suck low mileage trans. czcams.com/play/PLQLkuOdKuFot2BAqwwKzgyyIEUJ2Z_Er9.html cheers
@@YepThatsIt Thanks for your suggestions. I agree it's strange to have such issues at such low milage, but my ZF in my XR6 Turbo had issues at only 30,000km and the ZF in my FG XR8 milkshaked so I've had very very bad luck with these boxes.. I do find it strange that its only fluctuating revs when not underload and with no throttle.. I might buy a cheap scan tool and see if it's throwing any codes before spending dollars on it... Thanks so much for your response
Wheres the temp sensor on the valve body
hi, sorry for delay in reply, we just got back last monday. temp fluid sensor - tft is located on the mechatronic conductor plate. cheers
Did you forget to put the last sensor/solenoid into valve body on the end where the magnetic shift rod is?
hi, no vacant port on this one. cheers
@@YepThatsIt At 18:08 on video there is an empty hole next to the yellow solenoid on the side where the magnetic shift rod goes,on mine I have a solenoid that goes there making 8 solenoids total whereas I only see 7 on your valve body.
This is one of the best vids about this trans but yet you still forgot to give all the bolt sizes for the torque screws. Only thing youre missing.
hi, thanks for that. most people have a set of tools/sockets anyway. i`d be surprised if anyone would go out and purchase only the exact tools needed? cheers
@@YepThatsIt typically yea. That's how diy works.
So I'm having a problem in 2nd and 3rd gear at wot. The error mentioned is 2700 trans friction element A. I'm thinking something is slipping as it's at Max power and load. It goes into a safe mode as such where the motor will not create any boost but changes gear fine. I'm thinking it's a pressure issue. Would this service with the valve body seals possibly fix the problem
Quote
Go to top
hi, it would be worth a try, however your solenoids are probably contaminated and/or leaking....especially if you`re getting a fault code. fault codes are usually electrical parameters have been exceeded and noted by pcm. check your cat isn`t blocked as well. cheers