Monster magnet meets servers...
Vložit
- čas přidán 15. 09. 2016
- I was given a rare opportunity which I simply couldn't resist. Testing my monster magnet on three different servers! Will the sturdy servers be much better at handling a powerful magnetic field than what I previously have tested? There were a few surprises :)
Link to Mortens channel, My Playhouse: / sirnetrom1
Video with him fixing the servers: • Heroic Rescue Attempt,...
Link to Big Clive's autopsy of one of the fans: • Dead server fan autops...
And Dave from EEVblog too: • EEVblog #951 - Mailbag
Full music credits:
Tempting Secrets - Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1300038
Dream Culture - Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1300046
Cephalopod - Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1200081
Sunshine - Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1100517 - Věda a technologie
Dell server: Intruder detected, Intruder protocol engage, Ramping up fans to 100%.
I haven't heard a server run that loud since back in my Minecraft days when we ran one on a hosts basement server
"Basement server" lmao
@@specialunit0428 yeah I'm like 100% sure it was a server unit that he had in his basement with how unstable it was
@@jasthebaker lol
*starts flying*
- you told me they're litle more noisy.
- just a tiny bit
*jet engine started*
- oh its just standby..
Indeed, then the other three jet engines started and shut down and started again.
+Zaldhy Darwin my computer basicly 😂
Zaldhy Darwin Damm u are sure right
hahahaha xD
"Dont hammer a magnet!, they dont like it!"
Awww thats the most adorable and cutest thing to say X3
Lol
"No results so far"
Dell computer after 3 seconds: *screaming in pain*
Ubisoft servers are being held on the wall with super magnets
Anonymous #1 realy ?
#Roasted
Still better than EA's servers, at least ubisoft's actually exist XD
Anonymous #1 welp Ubisoft tried but failed
Anonymous #1 iiiiii
Welp, that's one way to get rid of viruses
And your valuable investments...
And your fingers
Very fast way to make your data unreadable :-)
I did fix the servers again!
4
Xannari Ferrows and your life
Why only 6 replies to a comment with around 200 likes
Now make that 8
"We have been discovered" I almost died. Lmfao
I just enjoyed watching two men push a magnet over a server...
i love how that dude's hobby is like at least in the top 10 of the most expensive hobby's there are, like one of his "favorite servers" costs about $7-8k and it looks like he has atleast 50, like damn...
well that guy got a freaking fun HOUSE FOR HIS HOBBY
You can get those used on ebay for a couple of hundred dollars.
He's an IT.
He plays/works on huge data centers for work.
Yes, with a job like that, you could buy at least 3 houses xD
HI rodderboy2000
The price of my favorite server the Awesome IBM x3650 M1 (7979) is between $80-200, The most expensive one I got is an IBM x3650 M3 with two Xeon X5680 and 96GB of RAM. That might bring in $1200 on the black gamer marked :-) Last count, i had 64 servers, including a lot of blade servers.
*puts magnet over dell*
*air sirens wail*
thats a good effect
That magnet is so powerful that just appearing on my monitor made my computer act up. :D
Sorry, this magnet surely demands respect ;)
Sure...
I may want to degauss my CRT after this video.
Next video: "Throwing a monster magnet into the internet server room"
Sean Bateman *fling!* CLUNKCLUNKCLUNK "Oh god the servers are flying out of the walls!
*THROWING?* That's a little too harsh???
We must go easier...
Throwing *FIVE* of them... ah that's better
sorry I'm kidding I don't wanna imagine it
"The internet server room"? Do you mean the room where all the internet is? That's not one room it's a wireless black box they can move around. You'd think it would be heavy, but the internet doesn't weight that much.
@Prime Megalodon haha!
i would subscribe if that was a video
Coincidentally I can't get on a certain website, seems like a server side problem.... COINCIDENCE?????
and my name server was down and its a dell.
Well you said "coincidentally" so yeah I'd guess: yes, coincidence.
so how do u comment if websites don't work :/
The bloody things are so unstable :-) must be solar radiation, or
Blizzards servers?
*HARD DRIVE* Systems ok
*MAGNET COMES IN* HEY GUYS!
*HARD DRIVE* OH GOD FANS SAVE YOURSELVES!!!
rip fans
they became an air conditioner ;-;
SSD: System is ok
*magnet comes in*
SSD: System is still ok
DVD DRIVE: HELP I BROKE!
I guessed right! I thought the HP would survive, I mean, 4 hard drives against one?
But this was seriously awesome!
I'm kinda glad that the HP was the only one to survive.
Yea
The reat are just some unreliable crap
Awesome video as usual and thank you for doing the dangerous tests.
What are the gloves for? If you get entrapped gives or not, that digit is gone.
No problem. The gloves are to take the little pinches and splinters instead of my skin :) You're right that they will not be protective if my hand is caught between the magnet and something large with a lot of iron in it. I'm also a little concerned about nickel allergy since I handle the nickel coated neodymium magnets so often. Thanks for watching!
"and oh boy did we get a reaction out of the dell"
*police sirens wailing in the distance*
WAIT
Meanwhile on Steam Servers
kids in Africa coulve eaten those servers
you, I like you. well at least that comment.
i wouldve tackled them noone destroys a server on my watch
LMAO!
***** no no LMOA i will tackle them if they touch those servers my servers all MINE
Shut up!!!!!!!!
Don't you dare bring that nasty magnet near my server LOL great video - I also saw the one morten posted up. Poor servers ;)
I fixed them all again,, check video.
I want to see the crushing power of some of your magnets. How about "Making Orange Juice With Magnets"?
Thanks for the suggestion. Others have made such a video, so it's not on top of my own to-do-list :) Another problem is, that the magnets are fragile and will likely shatter when letting them fly together for the crushing. The neodymium magnets are very expensive. I'm not rich enough and too glad for my magnets to just destroy them for the sake of a video :(
Well, how about making a special, strong enough stand to slowly ease the magnets into each other (and pull them apart again)?
Then there's no point in doing it at all. If he has something that can exert the same push/pull as the magnet he might as well use that thing to crush stuff.
Welcome to the magnet press channel
@@superdau What if he used aluminum pipe that the magnets could fit into and used high pressure water to slowly bring the magnets closer
Hello everybody and welcome to the magnetic press channel, today we have 3 computer server thingies and lets see if we can make it stop working
I fixed them all again,, check video.
HI ShowcaseGaming
Yes that video is on my channel,, video 408 :-)
I can appreciate any guy who has a 'playhouse'
9:44 - I think the magnet has boosted the electrodynamic forces of the fan's brushless motor causing it to overspeed. Also, the additional induced electricity in the fan's PCB has caused it to burn it's components, hence the smell of burning electronics.
Is it a coincidence if the video is 13:37 long ?
what does that mean?
Well, it is my longest video yet ;)
+Brainiac75 google 1337
That's elite!
leet, not the same :D
Press rm -rf / to pay respects.
ProCreeper 2000
It's a Linux command.
* sudo rm -rf / --no-preserve-root
Viktor knows what's up
***** You fool, not just the hard drive.
Gain Medium haha damn son, to bad we don't have dd in windows
Dude, this server channel legit looks like exactly the channel i've been searching for
Hi
Feel free to have a look around :-)
My PlayHouse
Heh :P
Two of my favorite youtubers, on the same video! What a time to be alive :D
Great - thanks for watching our videos :o)
It was a lot of fun making it! and also just just talking about CZcams with Brian, how has been doing this for so much longer then me. Was so nice.
This is how pokemon go servers work
I've maintained a few of that same model of HP. They're definitely workhorses, but are quite old now. I'm surprised to see that it was the only one that survived, even though it was exposed to the magnet the closest.
yet im here with a phone that crashed by a fridge magnet
Brian at 9:16: moves magnet
Dell at 9:17: *DEMONIC JET SCREAMING SUMMONING THE LORD OF ALL THAT IS UNHOLY*
I was an HP teacher when the G4 HP server came out. My all-time belief was : anything before Dell, but mostly because how crappy they are designed on the inside. Now, the DL380 G4 was and always will be (in my opinion) the best server HP ever designed. Happy to see it work, but mostly thanks to mirroring. This test doesn't say much about any of the servers though.. my Bias would obviously tell me : 1:HP, 2: IBM, 3:Dell :) Thanks for the fun.
Brian: Something's rotten
Me: IN THE SERVERS OF DENMARK AMIRITE
That last fan of the four refused to give up xD 'The little fan that could'
Great video and commentary! Thanks.
i always get happy when i see a upload from you :)
Thank you. I rarely upload this often ;)
to bad, but quality over quantity!
throw the magnet into a pool of ferro fluid
That would be a nightmare to clean up... But I do have a video with this magnet near half a liter of ferrofluid: czcams.com/video/L8cCvAITGWM/video.html
Thanks for watching!
can u even remove the fluid after it comes in direct contact with the magnet?
Brainiac75 I was wondering if with direct contact, the metallic tips of the spikes could dent the magnet
Mr. Wolfi I haven't tried it myself, but it should be possible to remove most of it with a syringe (preferably held horisontal so the magnet doesn't pull it out again). The residue on the magnet should come of with a cloth/paper tissue and a lot of patience... I don't want to try it :)
I don't know if your familiar with TechRax or however you spell his channels name, but he was stupid enough to actually get this fluid all over the magnet...
Very cool experiments! Thanks for sharing them!
2:39
Morten: Maybe we have to give Brian the server with him home if the magnet won't leave it...
Brian: *pulls out mallet* i've also brought a persuasion tool!
I know this video was like 2 years ago but I just found this really funny 😂
What a coincidence that the oldest server is the one that survives! #NewTechHasDowngrades
Cool, two of my favourite youtubers doing a colab!!
Thanks for watching our videos :D
HI Themoigt
Haven't seen you for a while, so I had to colab with Brainiac75 to get to you :-)
Yes i stayed in silence for a while but i was there
7:30 "no, no, this is normal procedure" lmao
The subtitles are always hilarious xD 7:09 - Pffhh hehe [strained laughter...]
Haha hvor cool! :D
Hej robin
Delete System 32 to pay respect.
Why isnt my windows 10 booting
I use linux so i just
sudo rm rf /* --no-preserve-root
why isnt my windows 0 dying
@@Kyle-ph5hc are you dumb
"And boy did we get a reaction from the Dell!"
why am I not surprised lol
This video is great and helped persuade me into doing the same sort of thing, cheers for the inspiration
Is this video 13:37 on purpose?
leet skillz mlg 420 69 d's for harambe stanky maymays (memes)
Cancer
What does that mean?
what does that mean
what does that mean
9:30
this is what agony sounds like
I had an internship a few years ago where I worked with IBM Power and Dell PowerEdge servers and their hard drives all day... this video brings back memories. Those things are tough!
So glad I found this channel!
Am I the only one that thinks he looks a little like the hydraulic press dude
Nahh there is very little similarities.
Hii luuks veri similaar tu hiim :)
Its the same guy
crushing a server with a hydraulic press?
pokèmon go severs are under scieltific matinence right now. please come back later.
lol, thumbs up, this was every data center guy's nightmare and curiosity in one moment! I cringed when you were packing the magnet, but surprised the mechanical disks heads didn't react at first attempt. I really was surprised at the dell fans, but realized they may be using a hall-effect sensor for RPM detection which explains their unusual failure since the engineers probably didn't expect a hideous magnet in the design....
Thanks! Curiosity definitely was a driving force behind this video :) The fans was the biggest surprise. Morten is still trying to figure out what happened with them. Hopefully we'll find out.
As the owner of two DL380 Gen7s, I can tell you that servers are some of the most rugged machines ever
13:37 runtime eh?
What is this runtime about?
1337 is just really dated nerdspeak for "elite". Thought it was cute that the length of the video was that. d:
BTW, love both of your guys' videos.
HI Retehi
$hit, does this mean that I am not nerd or Elite enough :-) nice I did not know that one!
With that many servers you are easily nerd enough.
Hi Samuel Doye
I get this a lot, so I have done a F.A.Q. which is located under the about tab on my channel.
The editing was kinda cheesy in this video.
but in a good way in my opinion atleast, it did help with hearing what they where saying with all the fans going.
Exactly +Redline. This video was made in a very different way than my usual videos. I'm usually in control of every little factor in the recordings. Not in this one. The mix of heavy Danish accent off camera and noisy servers forced me to think out-of-my-usual-box. I also aimed to make the video different from Morten's 30 min. 'documentary'-styled video with the exact same clips. I'm happy about the final result :o) Thanks for watching!
That HP is an invincible warrior! Also, this proves how robust is 4 disk redundancy :)
Nice video!
Thank you for watching :)
i love these types of videos!
9:25
*nuclear bomb is about to go off*
Try with servers with an SSD. Your videos are amazing, and I am honored to be a subscriber, but I have noticed that the quality of this video compared with your previous ones has changed, and it seems a bit childish. Also, could you add some (scientific) explanation at the end of your videos ? Thank you.
Probably because he didn't record it himself so he had to make do with the footage he had :)
This video is VERY different from how I usually make videos, but a fresh breath for my channel that I like myself. Morten has a 30 min. 'documentary'-styled video with the exact same material so I wanted mine to be different. I often have cartoonish/childish segments in my videos - like the melting pig in my previous video so that's not something new :)
I often have scientific explanations in my videos. The topic of this video has been covered in other of my videos - including taking a magnet killed hard drive apart, so I didn't want to include that again. Thanks for watching!
Keep up the good work
9:35
when your trying to game on a macbook and the fans kick in
This is the equivalent, back in my day, of Van Halen chucking TVs out of their hotel window into the pool.
also, why does that guy have so many servers?
well the magnets all magnetize things at different strengths, and all have different fields. What's the point of having that many servers? I'm asking because I'm not that into computers, not to be a smartass.
Probably because he's running a business that requires them, or simply collects them. My guess would be that he's running a high-traffic webserver of some kind, in which case you need all the server power you can get to keep response times reasonable.
Morten works with servers as a profession, so he has access to scrapped servers like the shown at low cost. When a company scraps a server it isn't necessarily totally dead. They change their equipment before it fails :) Thanks for watching!
HI James
I answer this question in my F.A.Q. under the about tab on my channel,, it is my most common question.
Hey sweet that answered my question really well. While I have the attention of a professional, what exactly is a server? is it like a computer that you can put a bunch of together and make a really powerful computer? also, instantly subbed for your reply.
more magnet-computer videos!
Well I did one on my channel as well, but I am afraid that I ended up with the same results! :-)
Quite interesting!
I definitly won't be putting a high-powered magnet near my servers (well, once I get them) anytime soon!
Thanks :) No, this is not recommended to anyone. But interesting that nothing more happens after all.
Yes.
love that magnet! Great video: excited for more!
Thanks for watching :)
Im betting that all of the serves die, as theyre running on HDDs... Old trick to wipe your HDDs was to run a magnet over them xD
Huh. I was quite surprised by these results. Interesting to see that only one of them would reboot into windows :)
I honestly thought they would all give up too. But one just made it through by having enough drives and redundancy. Thanks for watching!
After a good crack, I just put them in the microwave I mean I would have put them in the microwave if I did something I shouldn't have.
My Dell Inspiron 1521 always had cooling problems, so fans running hot 'n' high with a Dell is nothing new to me.
IBM / Lenovo is the good stuff if you ask me :-)
Amazing video! Keep it up, you do a really good job!!!
Thank you very much :)
I really like the editing style!
And the video of course! :D
Thank you :)
Brainiac75 I hope to see more video's soon :D
Should have taken a pass over the CPU, Memory and PSUs to cause some mayhem for the IPMI to make more noise about.
HI
Yes The PSU, I'd liked to have seen,, did not think of that.
Better keep those bracers away from that magnet or else those wedges would be needed on Morten's face ;P JUUUUST kidding.. they're probably stainless steel and non-magnetic
I did a video on the magnet meeting my braces,,,,,, you want to see,, go look :-)
warning clickbait ^^
Stainless steel is still attracted to magnetism.....
James Armes "It is commonly stated that “stainless steel is non-magnetic”. This is not strictly true and the real situation is rather more complicated. The degree of magnetic response or magnetic permeability is derived from the microstructure of the steel. A totally non-magnetic material has a relative magnetic permeability of 1. Austenitic structures are totally non-magnetic and so a 100% austenitic stainless steel would have a permeability of 1. In practice this is not achieved. There is always a small amount of ferrite and/or martensite in the steel and so permeability values are always above 1. Typical values for standard austenitic stainless steels can be in the order of 1.05 - 1.1. See Composition effects on the magnetic permeability of austenitic stainless steels
It is possible for the magnetic permeability of austenitic steels to be changed during processing. For example, cold work and welding are liable to increase the amount of martensite and ferrite respectively in the steel. A familiar example is in a stainless steel sink where the flat drainer has little magnetic response whereas the pressed bowl has a higher response due to the formation of martensite particularly in the corners.
In practical terms, austenitic stainless steels are used for “non-magnetic” applications, for example magnetic resonance imaging (MRI). In these cases, it is often necessary to agree a maximum magnetic permeability between customer and supplier. It can be as low as 1.004."
Seems you'r right... though.. i fail to see why anyone would want to have magnetically permeable wire on their teeth
Nicely done!
Just come across your channel and I watched some of your previous videos too and I liked what I saw, I look forward to seeing more of you experiments...So I am subscribed.... :)
Awesome! Welcome aboard - more to come :)
I look forward to watching them :)
ditto :D
That's kinda why I use HP ProLiant servers, but with a 4 disk RAID 1 it stood the best chance, those poor servers, but their age makes them kinda useless, hell my G6 ProLiant is fairly past it's sell by date.
HI
Well Yes anything older then a DL380 G5 is kind of worthless. The G6 is pretty good,, That can use the XEON 55 and 56xx series. they are still fast to day. (the high end ones)
I did not want to brake all my good servers, that is why these are older servers :-)
Indeed, my U1 HP ProLiant DL160 G6 is packing dual Xeon X5670's, but only 16GB of RAM
It is pretty reliable even after 4 or so years.
HI Joshua Nicoll
That is a powerful server! what are you running?
It runs a pretty basic version of Ubuntu Server. I tried centOS, SuSE, Redhat and Windows server, but none of them suited the need as well as Ubuntu (the enterprise OS'es were overkill) It's basic function of as a beefy NAS, network hub, BOINC compute machine and Minecraft server.
Hi Joshua Nicoll
You shout look in to putting a virtual lair under your Ubuntu, Like I use VM-ware and have made many videos on that. Then you can run 10 different servers on top of that. and try out a lot of different stuff, with out messing with your "production" server :-)
Thats hurts me a lot when i need a server....
I fixed them all again,, check video.
sa kardeşim
That's the sound of industrial fans xD
Good that I have none of those in my home PC xD
And Joda said: "The smell of burnt plastic is very strong with this one!"
Hehe, the whine of that single Dell fan at max rpm was insane. I wouldn't be in the room if all four were running at max rpm...
Thanks for this informative video!
Thanks for watching :D
the 1337 video length
can you melt a magnet and if so what happens if you get molten magnet near iron?
It stops being magnetic after it becomes molten so this is not possible.
It stops being magnetic once you heat it up to Curie Temperature.
TheBackyardScientist did a similar video where he drops molten iron on a magnet.
wth don't you go to school dude
this isn't something I learned in highschool and I don't know why they would ever teach me this in the college courses I'm taking
From the start, I thought you were gonna go on a flight with the magnet, and I was like "This man is definitely now on a deserted island."
Great Video. Keep up the great work. Nick.
wait...SO YOU JUST COULD KILL A TERMINATOR WITH A GIANT MAGNIT?
He is Cool LOL😂😂😂😂😂
TERMINATOR:SO LONG BABY!
m a g n i t
Servers meant to run 24/7 but has Windows instead if Linux... What?
You guys look like great friends!
Very interesting video, I expected the servers to instantly fail as soon as the magnet came near.
The video ends at 13:37
I'm surprised by how fast people noticed this ;) Thanks for watching!
holy shit.
We are here to see if the video ends at a cool number
the video is 13:37 minuets long, what does this mean? D:
?
itanimulli /\
/0\
Leet/1337
Omfgwhothefuckcares no shit sherlock
laughing because i once had a dl380 g3 and immediately recognized the body type from the thumbnail even though its 1 gen newer! amazed 4/6 of those old U320 scsi drives held up that well to the magnet! really shows how consumer geared sata stuff (even though still sometimes found in enterprise) is a less robust command set overall and less tolerant to interference like this. I think it’s wild where the magnetic field like caused the dell’s fans to short among all
the hdd stress! sas is the modern evolution of scsi so would be interesting to see how spinning 10k sas drives would tolerate this in a newer server.
liked the editing... helped me understand what you guys were saying
I needed to think out-of-my-usual-box for this one. I'm usually in total control of all factors in the recording - not in this one :) Thanks for watching!
well it was really well done. thanks for replying :)
Lol i have the 2950 at home
HI
Me too,, two of them again :-)
Going to the Asian kid's house
Mortan:"I think he is deliberately trying to ... crash my server?"
Brainiac:"No... No... This... This is normal procedure!
LOL
This just cemented my love of HP. go server!
[ Content Deleted ]
13:37
du bist wirkilch überall :o
iPapaya :AERO: wo denn noch?
+Marcell D'Avis ist überall!
Bei 1&1
KotoFC ich möchte dein arsch Magnet sein
"the smell of burnt plastic is strong with this one" that killed me LOL
9:19
**Server tries to blow the magnet away**
Magnet: Your fans are no match to me