INSTALLING THE 8” CUSTOM PIPE ENTRANCE! (WILL IT WORK?) Part 8
Vložit
- čas přidán 22. 04. 2021
- The day has come. It’s finally time to install the custom 8” pipe entrance. I’m just as excited as the customer because this has been a dream project. I would love to keep building pipe fences and custom property entrances. Nothing much beats the look of a pipe entrance like this. It makes a statement and is widely practical with how secure you can make it.
More to come on this project. We have to hang the cool custom pipe gates and build the connecting pipe fence. Stay tuned for more from this fun build. All the other videos in this series are linked below!
SHOP AT AROSSWELDING
www.arosswelding.com/shop
NEW CHANNEL - / @austinrosswelding
8” CUSTOM PIPE ENTRANCE VIDEO SERIES PLAYLIST: • 8" CUSTOM PIPE ENTRANCE
PART 1 - • 8” CUSTOM PIPE ENTRANC...
PART 2 - • FITTING PIPE - FABRICA...
PART 3 - • SADDLING 6 inch PIPE t...
PART 4 - • WELDING 6” TO 8” SADDL...
PART 5 - • LAYING OUT AND BUILDIN...
PART 6 - • BUILDING TWO 12 FOOT C...
PART 7 - • HANG PERFECTLY LEVEL G...
Part 8 - (this video)
Tools & Gear I used in this video:
Welding shirts - www.arosswelding.com/shop/wel...
Metal Marker (Soapstone) - www.arosswelding.com/shop/soa...
OTHER TOOLS YOU MAY LIKE:
Pipe Fitters Blue Book - www.arosswelding.com/shop/blu...
A-Frame Hoist Digital Prints and Material List - www.arosswelding.com/shop/afr...
BUILD YOUR OWN GATE JACKS (digital prints) - www.arosswelding.com/shop/gat...
For heavy-duty gate use a homemade gin pole & set of gate jacks - www.arosswelding.com/shop/gin...
LOOKING TO GET INVOLVED? Join My Network!!!
arosswelding.mn.co
See INSIDE the Inner Circle:
www.arosswelding.com/seeinside
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
MORE PIPE FENCE & PIPE ENTRANCE VIDEOS:
• Welding Pipe Fence
czcams.com/play/d.html
I'm an equipment operator, one tip I can give you if you don;t have the height with the two machines you can "choke" (double cinch ) the pipe 3/4 the way up to lift the pipe off the ground so you don't cave in the side of the hole.
Well done Austin. My father in law had a saying , "it's hard to beat a pro at his own job". As you said, it's important to build relationships.
Great job. I love that it’s big and tall enough for a semi truck
Thanks. Me too. I think it turned out good
@@arosswelding did ya put a foot,piece of tin,bottom of hole so it dont sink, & use tin,both sides of pipe,stop dirt in the hole dropping. acts as a skid..id even put 2ft concrete in there so the pipe fills a little..even blow couple holes in side for extra bite of crete..
Nice job Austin
I think it is awesome that you are building a community around this trade. I’ll be 40 in a few months and struck my first rod last year. I’ve been hooked ever since and have made a hobby of it now. This channel is awesome and I have learned a lot so far. Looking forward to the next video.
Killing it! If it were me.... the shot of your rig sitting in that entry way would be on every business card I hand out, C'Mon! Looks great! Can't wait to see the gates hung!
Almost an anticlimax all that work and up in one day. But shows the prep and planning paid off. Looks good though definitely a statement. Your tip of the day is spot on. As a Carpenter builder of 40 years building up contacts with people in your industry is vital. And a good working relationship. If they know they can turn up do their job without hassle and the big one is get paid in a timely fashion you will get good support. Find good workers you can trust and keep them sweet.
Im proud of you austin, you come a long way from when you first did that implement repair, hats off to you and keep on keepin on 😎😎🇺🇸🇺🇸🇺🇸
I appreciate it Ruben
The skid steer was worth is weight in gold on this project! Very nice job!
Yes it was! Most definitely!
On the ranch we always set the gate back far enough to put a conventional tractor and a set of doubles stock trailers between it and the road so nobody ever had to stop on the highway to open a gate
If the gates couldn't swin inward we increase it the length of the gates plus a little more. The lost grass is a smaller cost than fixing equipment that got hit by some dummy driving a Mercedes .
In texas oil companies do 40 ft inward from fwnce line
Very slick, I bet the owner will absolutely love it. Heck of a project. Awesome job Sir!
Your exactly right. Each one of you guys brought skills to the job that resulted in a outstanding job. Excellent networking on your part. Can’t wait to see the final product!
Wow that's a project to be proud of that turned out really nice I was excited to watch this video been following this build from the start.
I think it turned out really nice also. Thanks for following along!
The first part of the entrance has turned out
nice. Can't wait until next
week to see the completed
project. With the gates
installed. Great Job.
This was the fastest 20 mins on CZcams. Have enjoyed watching this project and now seeing come together. The drone shots were a nice touch too.
These videos make me want to weld something! 🤠
Thanks for following along!
Your operator looks to be a smooth ol boy , he probably don't want his face shown because his books are full for years
I have a small Hobart Champion 145 that I picked up at tractor supply a couple of years ago for hobby type work and minor fab stuff around the house and yard, plus it doubles as a generator during power outages. ( great little unit btw, for anyone looking for something like that) Stumbled upon your videos by accident really but now your channel is one of my favorites. I'm a self employed Master Plumber here in Texas. Really love your positive attitude . You obviously love what you do.
You are correct. Relationships are very important, regardless of the trade, you never know when you'll need someones else's knowledge and experience to have the job go smoother and quicker. Keep up the good work.
Great advise! I love having friends in just the right place.
Using a pressure washer will mix the cement as well as add water works great setting posts. Give it a try.
Awsome job Austin looks great and perfect for my fld with 13 foot stacks to fit right under 😉👌
C’mon! 👌😎
Great drone footage! Your quality with welding and filming are top notch. I know editing can be very time consuming. It doesn't go unnoticed!
I appreciate that. You are right, editing is very time consuming. I appreciate you watching!
@@arosswelding , thanks for the effort!
I'm 62 and still trying to learn something new every day.
You inspired me, I bought 3 40’ sticks of 7’’ well casing to try to copy you! 24 ft opening with pre fabbed gates though.
Love the skid steer boom. Get r done . Looks great 👍
Great to finally be on the job site with the right tools to get it done right.
Thank you for a very well produced video
I enjoyed watching you and your work mates doing what you do best.
You're quite right when you say that we need to nurture good working relationships with other tradesmen,
and for that matter, everyone that you come in contact with.
It pays huge dividends; we all prosper together,
and sometimes make lifelong friendships.
That was awesome Austin! Went together and up just like you planned. Thanks for sharing with us, everyone did a great job!! Fred.🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋
Thanks for watching!
Awesome video Austin. Thanks for the advice. Really appreciate what you doing.
Thanks. Thank you for watching
So Awesome!
Fabulous job. Beautiful entrance you created. You do such outstanding work!
Great Job!! Been looking forward to this video.
Looking great buddy.
Im building another one this weekend.
Been waiting for this like months ago lol .. keep all the good work.. keep them good videos coming.. great job
Just an absolute beautiful sunrise huh? The hell with bridges of Madison co.
Love your videos, and have helped me quite a bit, actually was able to run water line for a sand and gravel pit 12inch sch 120 by learning from you and a couple others on here. I appreciate your videos and look forward continuing to watch... I have loved this gate project. You do fine work good sir
It’s my pleasure. I’m glad the videos are helpful.
Wow, 12 inch sch. 120! That oughta do it!
@@seanmanwill2002 right! But it'll be a few years before they have to replace any of it hahaha
Very nice work. Great planning and design to be able to do all of the welding at ground level.
Looks awesome
Awesome 👍 I knew it was going to look good when you got it up!!!👍🇺🇸
Thanks for watching!
Great show this is the best welding fabricator show on CZcams....👍👍👍👍👍
Looks great you all work together good 👍
Looks great Austin!
Great work, nice to see job begenning to the end.
Hell yeah looks sweet!!!!!
That’s slick!!!
Tolle Arbeit!! Maximale Erfolge und noch viele interessante Projekte weiterhin!
Gruss aus 🇩🇪🇩🇪🇩🇪🇩🇪
Thats really sweet Austin. Hope someday to see you out on the row. Weld on my friend.
Looking good.
Looks great! Good work man turned out perfect. 👍🏼
It’s always a good day when ever there a new A Ross welding video
Nice job man.
I have done those, having the right equipment is essential.
That’s for sure!
New subscriber to your CZcams channel and Instagram feed. Absolutely awesome content. Love your advice of the day at the end of this video. Building good relationships is a critical component of a good life.
Reckon yall needed a skytrak amigo! Work looks great. I like how you take pride in your work. Keep on keepin on bubba!
Good job man looks awesome
FINE JOB
On my little tractor when I'm installing swing sets I have a pallet with six foot extension with another pallet on top. I first lift the top of the swing and put it on my six foot high pallet. I then put the forks on the bottom of the pallet and lift the swing up and set the pipe legs into the hole. You must be on level ground. The six foot pallet is made of steel and stores in the front of my trailer. Doesn't look safe but I have not had a problem. Your pipe is a lot heavier than my swing sets but it should work. Handy to have.
I like that a real nice job done well
That looks super and keep up the great work.
That looked fun 👌🏼
c'est de l'excellent travaille mon gars!
Outstanding Ross! 😎👌👍👍. You did a fine job!
Thanks! Thank you for watching!
Been ready for this ine
Yeah me too an im ready to see them big gates on it to see how it looks.
Great job.
@Justin Ross, excellent video of a great job!
Awsome video been waiting on this one
Me too!
Man that looks nice
Nice work!
A job well done sir
Awesome job I love your videos man.👍
Now imagine how much power an elephant has to be able to push those trees over even easier.
Nice looking job
Nice!!!
That turned out fantastic buddy 👍! Been waiting for this video 😁. The dirt guy was top notch with his equipment. So what's next 😏??
He is very good 👌
Usin the circle burner to cut holes in pipe for cross members! 😎✌️
Nice Good job Sir Wish i had one like that
Nice!
Hey Austin! I learned something today..... Alway turn your gas bottle off before you go to the house for supper. Forgot to do that and SUPRISE, come back three days later and no Stargon left in the tank. Dang-it! That’s the second time I learnt that lesson. I’m calling it a two-fer!
Anyway, enjoyed the gate raising party. Good video, bub!
Cheers!
Whipple
Great job! I also like your music
job well done
Nice one...
Get’n er done boy. Lookin good
Thanks! And thanks for watching!
Very nice work brother. Looks great.
Thanks! And thanks for watching!
Guy always has garage rod (8010) leftover from jobs. Usually if they were open boxes of rod the contractor didn't want them back . They would just throw them out . Even in a sealed box if not stored right cellulose rod will stick together after awhile . Good Job Austin
really nice work/ video.
Thanks. And thanks for watching
looks good
Thanks
looks good cool
Thanks. And thanks for watching
Just ordered some stickers from you man to support on my welding hood . Stay at it. Very classy but none the less all this knowledge and your still very very humble which is rare now days. I will continue to support ya brother 💪🏼
We sure appreciate your support! Thank you for the kind words and for ordering the stickers! We are wishing you the best!
Cool story Bro ! 😎 Well done 👍
Thanks! And thanks for watching!
Love it man! Think I get a tad bit smarter after every video. C’mon!
Your dirt guy has the equipment yes, more importantly, he has the talent to operate that equipment in an efficient and knowledgeable way. nice work. Did you use plumb on the vertical poles to insure horizontal pole was level?
another fine job Olie At least 15 thou
Awesome job,i like chunky. Make it last forever
Nice of you fella I’d love to be part of the inner circle
arosswelding.mn.co/
I’m a certified structural welder. Watched ur entry way install I loved the slowness and saftey. Turtle always wins.
Bad Ass Entry
Not too bad with only one camera. A really nice gateway.
I like the content you put on your channel. If you ever need another dirt guy Creek Co construction can help with that.
Great video
Thanks!
Thanks for watching!
My welding truck is an OLD F700. Ex railroad maintenance truck. Has a knuckle boom on the back. Not good for pipelining but great for structural stuff. I'm going to figure out a CNC plasma setup that is small enough to carry on the truck.
Looks awesome man, how deep we’re the holes for the posts?
It's always fun pulling in someone's entryway and you don't know if you're going to make it or not.
Great job and hurry up and get another videos out lol
should have sloted the pipe in the hole so the concrete would go inside to tie it all together
Hi Austin, 8010 vs 8018 witch is better for 6"-8" pipe like that? thanks for the help.