i remember back in the day there was old school muscle cars with the built 400 454 or 383 stroker motors now in 2022 everything is LS powered supercharger out .
How much timing did you pull , how did you do it??, it doesn't self tune when you enter the supercharged parameter on the engine setup in the fitech hand held.....I've got everything figured out except for the fitech tune ....I'm still lost, do I have to hook it up to a laptop??
its running great, the Holley efi really is allowing it to run so much better than the Fitech I previously had. yes the tires break loose all the way up to fourth gear.
I literally wanna do this right now. Hoping its worth the time and $. I also wondering if my 4l60e and 10 bolt w posi will be able to take the power without breaking right away. My tires are 275 in the rear also hoping its not spinning all day. Its a cruiser for me dont wanna lose driveability. What are your thoughts?
I am ready to do the same to my ls1. How are you liking it this far? I was worried about my 4l60e and this set up. Also running a 10 bolt. Has anything broke yet? Overall are you happy with this set up?? Thank you your answer will really help me with my 70 lemans ls1 project!
@@KevinHarrington55 thanks man. My ls1 spun a cam bearing. I ordered a new crate ls364/450 for a replacement. Prolly gonna do the lsa soon tho. Fersure
It doesn't come complete, you'll still need to buy a pig tail for the alternator, and oil/fuel sensors. Overall I didn't mind because compared to the Fitech system this surpasses it by a light-year. It's a much more user friendly interface and the tuning software is amazing.
@@KevinHarrington55thank you sir, thats the answer I was looking for. Ive searched for people using the holley terminator or dominator setup on a older vehicle with an lsa setup. Sounds like ill be going this route as well with my c10. Thank you once again. Im going to subscribe to see any more content you come out with.
The pulley was part of a kit from Olson Kustom Works. It comes with the pulley and a bracket for an idler. You just have to figure out what size belt will fit your setup
i remember back in the day there was old school muscle cars with the built 400 454 or 383 stroker motors now in 2022 everything is LS powered supercharger out .
Sounds sick bro!!
Thank you! Thanks for watching
🔥🤟🏾
Thanks!
Kevin’s Garage I have a 68 camaro with a ls3 from a 13 camaro and just came up on a Lsa can’t wait to slap mines together keep up the great work
Hell yea!!
Hey Kevin, Sound really good!!! What cam are u running? Thanks.
Thank you, I’m running the Texas speed 228r. Not optimal for boost but it works, May go to a BTR supercharger cam. Thanks for watching
Hey Kiven I just bought a 2013 lsa salvage. Trying install it a 2000 trans am. Any suggestions
How much timing did you pull , how did you do it??, it doesn't self tune when you enter the supercharged parameter on the engine setup in the fitech hand held.....I've got everything figured out except for the fitech tune ....I'm still lost, do I have to hook it up to a laptop??
What accessories kit did u uses
How do u like the upgrade? Smooth driveability or breaking wheels loose when u drive?
its running great, the Holley efi really is allowing it to run so much better than the Fitech I previously had. yes the tires break loose all the way up to fourth gear.
I literally wanna do this right now. Hoping its worth the time and $. I also wondering if my 4l60e and 10 bolt w posi will be able to take the power without breaking right away. My tires are 275 in the rear also hoping its not spinning all day. Its a cruiser for me dont wanna lose driveability. What are your thoughts?
I am ready to do the same to my ls1. How are you liking it this far? I was worried about my 4l60e and this set up. Also running a 10 bolt. Has anything broke yet? Overall are you happy with this set up?? Thank you your answer will really help me with my 70 lemans ls1 project!
I love this setup, couldn’t be happier. It’s a great running car with a very streetable cam/ gear ratio combo!
@@KevinHarrington55 thanks man. My ls1 spun a cam bearing. I ordered a new crate ls364/450 for a replacement. Prolly gonna do the lsa soon tho. Fersure
@@KevinHarrington55 u need some new vids showing her running
Guessing the holley setup had everything you needed for it? I'm looking at the terminaror x max for my c10 and go with an lsa setup as well
It doesn't come complete, you'll still need to buy a pig tail for the alternator, and oil/fuel sensors. Overall I didn't mind because compared to the Fitech system this surpasses it by a light-year. It's a much more user friendly interface and the tuning software is amazing.
@@KevinHarrington55 i know about the fuel/oil sensors and then the alternator
Just didn't know if all the sensors on the zl1 lid were used or just the map sensor and iat sensor
@@ccooper04 All I used was the map sensor and IAT, The rest is plugged/capped.
@@KevinHarrington55thank you sir, thats the answer I was looking for. Ive searched for people using the holley terminator or dominator setup on a older vehicle with an lsa setup. Sounds like ill be going this route as well with my c10. Thank you once again. Im going to subscribe to see any more content you come out with.
Just seen the older videos posted. Was this video before the ring lands or after?
Clifton Cooper this was after the rebuild
What accessories are you running?
I’m using F body accessories and brackets
@@KevinHarrington55 do you have any info on pulley you used on the blower? And ac bracket?
The pulley was part of a kit from Olson Kustom Works. It comes with the pulley and a bracket for an idler. You just have to figure out what size belt will fit your setup
Are u running slicks for rear tires? How wide tires in the back?
Drew B I’m running 275/40/r17 Firestone firehawk Indy 500’s. I may end up with a mini Tub
and go wider
@@KevinHarrington55 bad ass. I cant wait to install mine. U think the 10 bolt will hold the power?
@@drewb4824 I think it will hold the power as long as I'm on street tires, as soon as it hooks I think the drive shaft or u joints will go first lol
@@KevinHarrington55 add me on insta: bunyadamus. Also, how is she driving? I want to do this asap