Honda Accord Fuel Pump Removal Sending Unit Testing
Vložit
- čas přidán 8. 09. 2024
- Honda Accord Fuel Pump Removal Sending Unit Testing
Disclaimer:
This video is not meant to be a definitive how to.Always consult a professional repair manual before starting your repair.I am not responsible for any problems that you might incur by watching or following this video.Follow at your own risk.
Honda has good honest designs not intended to prevent DIY, channel repairs to dealerships, increase repair bills to increase profits. A reflection of their culture.
As many have said and experienced in Japan you can drop your wallet in a super busy train station with lots of money and you can collect it at the station office with everything as you left it.
Good video! I would have added that it's a good idea to blow away loose debris and rust before removing.
Yes that is a very good idea.
Awe come on you dont want to drop and clean the entire fuel tank wheres your sense of adventure 😆
Nice video but big word of caution, you should have wiped down then vacuumed the top area of the pump, there was a ton of rust and crud. Also a mistake laying the pump over the tank opening such that crud from pump falls in or crud from trunk falls in, keep it covered while testing.
Its nice that you don't have to drop the tank to get access to the fuel pump.
z c Czech q . jk
Saves boo koo dollars on the mechanics bill....
Honda has good honest designs not intended to prevent DIY, channel repairs to dealerships, increase repair bills to increase profits. A reflection of their culture.
As many have said and experienced in Japan you can drop your wallet in a super busy train station with lots of money and you can collect it at the station office with everything as you left it.
@@deannasalem9195 , u from Louisiana
You do on the older Honda Accords
separate black cable from battery. open fuel cap to release pressure. clean area scrupulously around gas pump plate first. then remove the small bolts, then place rag under gas lines to catch gas that will leak out. unclip gas lines/pull off. gently lift out assembly which will drain gas so have rag or bucket ready.
this guy sounds like Peter Griffin lol
What if my car won’t start. I heard you say once you unplug the electrical part you can turn off your engine to release pressure what can I do in my case if it don’t start?
Thanks alot for your video it helped me alot I fixed my car like in 30 min GREAT VIDEO!
Great tutorial. Only one I found that included removing cable clip after all screws removed. Know now to just pop off with screwdriver.
KEEP THE VIDIEO ROLLING RICH THANKS
pedro rodriguez O
Thanks it helped me out alot.
Thanks wasn't that difficult only took me one hour
Thanks for your video. I checked mine at 105.5 ohm when empty and 3.3 ohm when full. Is it still ok or it needs to be replaced? Thanks again.
Did you drain gas before taking it off?
The access plate is a godsend, at least there was a unit under the plate lol :-)
I bet that has never happened again, that was a funny outtake :-D
+zx8401ztv Yes i was totally surprised on that one.
Thanks for your videos....
Great video. :-)
oh well... done that a coupla times, with three different replaced gauges and the gauge seems erratic at best - yah, yah... checked for grounding ...
next thing i will test the wiring from the trunk using a variable resistor, not by coincidence, 100 Ohms ... just don't turn it all way to any of stop sides and you are good to go - yes, needs to be wirewound
great video but after replacement the low fuel light turns on and the gauge say's i have half tank. did i install it wrong? or is something else wrong
I don't believe you stated the year model of your Accord. It's not in the title anyway. Different model years will have a different method to remove the fuel pump and/or sending unit.
Hey, I have a 2002 civic ex. I having issues with gauge is kinda not giving good reading. I changed the whole assembly with one from autozone but it’s not getting any better. I didn’t see correctly which pint you put those alligator clips on and should I get the same reading for my sending unit?
I hope my 08 has an access cover like that
Any thing after 98should have a access
Great!
Honder Accord
If your pump uses the big plastic screw nut to hold the pump in, don't ever use an aftermarket one. Only reuse the original Honda or buy a new Honda part. Aftermarket nuts will crack making a very dangerous even deadly situation for you or a customer.
+LeakyDiaper Thank you for the tip.
+LeakyDiaper. Hey buddy, what do you mean by the big plastic nut? I bought an after market fuel pump for our 98 Honda Accord & it's worked fine for over 5 years now....
The problem with Honda Accords is yeah, nice if the bolts aren't rusted because I replaced the bolts 5 years ago & now an 8mm socket only spins on the head of the bolts. So far a 11/32 socket got 1 off, so I'll have to use a little smaller SAE socket, or vise grips, [smaller size]. Bad thing with 97-02 Accords is all of the parts you have to remove if the tank is leaking & you have to remove it. Today, if I can get the pump out, I'll try one time to use the inner tank repair kit. If it'll work till next summer, then I'll drop the tank but with a bad back, this weather is killing me, to no end....
Use bolt out sockets .
@@billsmith2212 Yep Bill, I ended up going and picking up another set of bolt extractors. My son decided to borrow my 1st set while I was gone that afternoon..... I was actually surprised at the amount of rust being tucked away in the trunk, that access cover shouldn't have got all rusty but it was, oh well, at least i was able to get it with the extractor's..... Probably good I bought the 2nd set. I was missing the 2 sockets that fit brake caliber bleeder valves....
Where can I find the clips
Hi, should be worried about fuel pump going out and replace it proactively now? ( 2014 Accord w/ 200K)
great video, it helped me a lot. but!!!...now I have a problem, what if my ohm reader does not pick any ohm when it's in the empty position?.
it does read 4.89 on full position tho. thanks in advance, I really really really appreciate it.
reset it
Thanks for a great video, Richpin. I have to do this to a Mercury Cougar, and I've had it sitting for over a year because I'm dreading it. What did you do to abate a flash?
+TRASHURE Yes gasoline is dangerous so you have to be well ventilated and have a extinguisher.
+richpin06a Thanks, Boss!
Pull the fuse to the pump first. If you have a car that runs most of the time, run it till the tank is about empty. My grandson filled 3/4 even though I told him he had a leak in the tank & keep it under 1/2 tank. Now he dropped it off & I'm stuck trying to empty the tank once I pull the pump out. What my grandson doesn't understand is in order for me to do the work, I have to get into the trunk & you wanna talk about dangerous!!! I can't think of a worse place to be stuck trying to get out of in a hurry is this 98 Accord.... What a guy....
What year Accord?
So In order to change my fuel pump on my 96 Accord 2.2 do I have to drop the tank or no? Cause the car is pretty much the same
Just took mine out of my '97, no you don't.
HELP! EVery video shows pulling it out. I can't , more on the rear something is holding it down.
Also the videos show more space around the hole like its bigger.
But of course this doesn't surprise me.
Got it, got it. It was a little plastic thing connected to a hose. I had to break it. Just in case anybody gets into that. This was the original one!
Is this fuel pump associated with the gasoline dilution in the engines oil for the 2016 accord???
No, 1998-2002 and that's a completely different problem
What year is this
They should all have access ports
What´s wrong when the yellow light on the cluster wont light up? Thanks in advance
Usually the bulb is burned out for the low fuel indicator.
Disconnect the battery
Does one need to drop a tank on a 97 Accord? only the sending unit that tells the gas gage fuel level is under the cover in the trunk
94-97 Accords have an access in the trunk like this for the sending unit, but the fuel pump seems to be separate and I'm seeing stuff about cutting into the unibody under the back seat to get at it without dropping the tank (I have a 1995). Still doing my research; hoping the sending unit is what gave up...
Is this ray Romano
i replaced the fuel pump but it still wont crank. what's next please?
check the fuel pump relay under the driver side dash. also check fuel pump fuses driver side door area panel.
CAN SOMEONE HELP ME I HAVE A 98 HONDA ACCORD AND SHE CUTS OFF GASP FOR AIR AND JERKS IVE PUT SO MUCH IN MY HONDA BABY AND SHES HURTING DO YOU ALL THINK ITS THE FUEL PUMP !!😥😥
your transmission is blown
how about a 92 Honda accord wagon bro?
Lots of time and work. Gots to drop gas tank take a few bolts off too.
@@ArmandoHernandez-iq5we Or you can cut into the unibody and make an access panel. Seeing people with 94-97's doing that... might have to do it myself.
HEY RICH WHAT YEAR IS THIS HONDA ACCORD
2000.
THANKS BRO
Whatsapp year is this Honda Accord?
2000
Sloppy work. I wonder how many pieces of debris have fallen into to the gas tank. I would never use you as my mechanic. Thanks for the time you put into making this video. It was hard to watch though. I’m a neat and clean freak when it comes to dirt getting into areas it should not and seeing that you did not clean the area first was a huge distraction.
XKAP1976 relax p
Where to buy fuel pump online
12v to OHM , with ohm mater, your point to ohm mater is wrong....
Calibrat before making ohm mater....
showing the rong yr honda
P
Let's do Coke together
So dumb
no Coke. Pepsi.