GE Profile Dishwasher Not Draining Fix
Vložit
- čas přidán 29. 08. 2024
- The model of the dishwasher in this video is the GE Profile Quiet Power 4. If this video helped you, leave a like on this video, subscribe to my channel, and comment down below if this video helped you.
Disclaimer:
I am not responsible for any injury or damage of property.
After watching numerous videos, I finally found yours which explained everything in detail. Thank you for taking the time to make this video. 🙏
God bless you. Honestly. Single mom here, struggling to take the stupid clips off. You're amazing.
Thank you so much. Followed your instructions and the dishwasher drained. I was lucky enough not to even need to disassemble as much as you demonstrated....just removing the hub and filter was enough to get to what was clogging the drain line (including one very large coffee bean!).
Dude!! Awesome walkthrough. We’re renting our house and I just wanted to fix the clogged drain myself. This was what I needed. Better than a schematic!
Great tutorial! It’s very straight forward and to the point! Not a huge production like youtubers nowadays.
Thank you for taking your time to record this video and share the how to! Strange that GE made it so difficult to clean the filter when you have to disassemble the entire dishwasher internals. While looking for the right video I noticed some other GE models allow to remove and clean the filter without unscrewing any other parts. Plumber conspiracy is real?? 😮
Tanish Kumar, you are the best! This was incredibly helpful. Thank you so much for making these videos.
If you follow the step in the video and it still won't start....Be sure to allow the door remains open, for 2-3 minutes after restoring power. This will reset the machine if it was stuck on a cycle when it stopped. Came upon this subject by mistake but it worked. " Found shredded power towel in my drain basket."
I just wanted to say thank you! Going your video and the tutorial was amazing. Made it a simple job! Great tutorial. I appreciate it brother!
Thank you for this video!! My dishwasher wouldn't drain and could't get the filter out... Your fork tool 😂 worked great!! Thx
I followed your instructions exactly and it worked! Getting the basket out was the hardest part. It takes some fiddling. I think tilting the right side helped. Thanks for taking the time to post this
Excellent !
Sorry I don't understand you didn't do anything but take it apart. Why was it clogged or was it clogged. I must of missed something
Amazing video - saved us and well guided - thank you!
Thank you for the video. I would like to know if this dishwasher can be filled with dishwashing salt?
Damn 14k views in 9 months good job. You should upload more
Thank you so much! This totally worked to fix my Profile!!!!
Super happy I found your video!
You are very good at explaining. Thank you for this video!
Great video! Thank you so much.
Extremely helpful thank you so much! Didn't have to ask my husband for help at all.
Great video. Thank you for your knowledge
You’re the man. Great video.
Extremely helpful
My GE profile lasted 30years until it began recently leaking on inside left side. I’m trying to fix it. Any ideas?
Good video.
I didn’t feel the flap in the hole? Cause for concern?
Excellent instruction on how to disassemble and reassemble except you left out the very important washer on the sump.
General electric nautilus dishwasher
Filters to clean
very helpfull thanks!!
I don’t see you fixed any things all you did is taken them apart and putting them back. What’s the issue?
The issue was the filter. It was clogged and was not letting water pass through. Clean both filters.
Mine was also clogged
You just disassemble and assemble parts, but you did not fix anything?
Are u actually 6’4 now, or is Marvin lying to me
Unfortunately, your video didn’t work for me. I actually wrecked the basket filter trying to take it out using a fork. You wouldn’t happen to have the part number to replace that basket would you?
At time mark 4:00, you mentioned rotating the centerpiece counter-clockwise and it comes out easily. Well, what if I'm still rotating and it still doesn't come out, what is the next step?
Is the piece stuck in place or did you get it loose and you keep turning it but it’s not coming out?
@@tanishkumar9602 I'm having this problem as well, it keeps turning but will not come out. What would you suggest? Thank you!
@@lindsaysmith8306 Did you try pulling slightly up while turning counter-clockwise?
Mine is hardwired into the wires not a plug so do i have to turn off the power off to the turned off dishwasher cause it still always is like plugged in even when you turn off something and its still plugged in you can get shocked..
In your case, make sure you unplug the dishwasher and any other sources of electricity.
@@tanishkumar9602 yes, how? I have to turn off the power to my house because it is hardwired into the electrical wiring there is no plug!! Scarey.
@@tamarakennedy4976 there should be a breaker specific to you kitchen. Turn that off. I didn't turn the electricity off. You are just dealing with external parts. You are not being exposed to any electrical parts.
I couldn’t get the screw to come off
water leaks from this model, where should I look at?
Where exactly does the water leak from?
@@tanishkumar9602 from bottom, which is covered, difficult to open. i see water on the floor. i opened it up. the water level of the out part seems higher than it should be
You should remove the plastic mesh at the bottom of the dishwasher and then clean the plastic grey filter.
Tarnish this is me aiden
You didn’t say wht you found or fixed n?????
The grey filter was dirty and clogged in my case. Clean it out and see if that solves your problem.
just wash the dishes by hand
Why?
Ok bye