Y'all are a class act! I love how you approached the side skirt "repair" situation. You didn't drag anybody through the mud. . . Just simply stated "You give somebody an opportunity and they miss it..." so well said. God Bless guys.
Agree. In this business many have an extra issue in regard to substance abuse. It’s tough to get reliable people. Just move on. Sure whomever did the work feels bad about it. Sure they paid them and parted ways.😊
It's always nice to see you help local businesses succeed. Your parents must be very proud of you. You guys do an amazing job. Keep up the good work and give pops a raise.
Keep doing what your doing Guys !! You both are doing what you like never loose that sight !! Good luck in everything you do for yourselves and complete strangers 🙏
Having spent 17 years as owner of PBE Jobber, I can tell you about fisheyes. Use wax and grease remover, turn the rags often, don’t just smear the contaminants around. After that, do not touch the parts with bare hands, use inspection gloves if you must move them. Also, use wax and grease remover before wet sanding or you risk driving wax or silicone down into the substrate.
Initially I use wax n grease remover after washing car but then I wash the panel after final sanding and then use alcohol water solution instead of continually using wax n grease remover so I dont get any chemicals in substrate.
Props to you guys for showing the flaws as well as the when it goes right. Problems pop up and it’s refreshing to see CZcamsrs not afraid to correct it on camera!
Once in a while some smart and driven people just make it in a big way! These boys here found a gold mine and its paying off big time! But im happy for you guys! And it couldnt happen to nicer people, hard working and talented.and very lucky! Count your blessings! Great video as always!
The repair guys REALLY screwed up. Had they done a bang up job the Goonz boys would have bragged them up and they would have gotten some free advertising directly to people that are interested.
@@Tairone1337They didn't use the "fixed" one. They had ordered a new one from GM but it was back ordered so they thought they would help out a newbie company by having them fix the old one. But the "fixed" one was not done well and during the time it was in the other shop the new one came in from GM so they used it.
You know the best thing about this is. You guys build and build. And the most love is. The give away. Brand new. .. and the more fans. ❤❤❤❤ Gotta love it . Blessed
@@FastLaneLyfe2 1/2 million subs, and 500k views on each video. If they spent all their time reading comments and acting on every suggestion they'd never get anything done.
any idea as to how much air that system is moving and what it would take to "de-humidify" it? If a downdraft paint booth is 16 feet wide and 14 feet tall, typical air velocity in the booth would be 50 to 100 FPM. For this example, let's use 50 FPM. (lowest estimate)The total flow through the booth (16 x 40 x 50) would be 32,000 CFM. Now go price a dehumidifier for that many cfm. Good luck. The best option is to wait for a good day. Patience pays off.
Hey goonzquad supporting your channel to the fullest love the pups are getting big God blessing's to the family guys be safe Trinidad and Tobago in the Caribbean cannot wait on to finish the corvette starts up nice your dad did a great job putting them wires together take care guy's
I have been watching/following you for years. Today I saw on your phone, a reference to your faith. You have been a light to the world through your actions, your honesty and your generosity. Do not be a glimmer of light to the world, be a light on a lamp stand for all to see. You've been richly blessed. Share that blessing and be a light.....
This has been one of my favorite builds to watch……I cannot believe how much of this car is glued together……got to watch Simon crash it……. Seeing the upgrades…..yes definitely the best build……..oh yeah the cam sounds great!
Fish eyes are caused by the paint flashing off the solvents in the booth with no airflow. You will notice it only happens to parts laid out flat, not the hung up parts. You need to keep the air moving through the paint booth until its flashed everything off. Then you can close it up and let it cure.
The raptor looks much heftier with the bigger tires and rims and nice rolex to match. The C8 sounds super mean with the exhaust and cam. Great work guys, take care 👌😊
I just wanted to say I love what you guys do, I watch all of your videos, such an amazing family! Much love up here from ohio.❤ You can send that raptor my way😊
Those puppies are gorgeous! Would love to have one! Our boy passed away late last year, and one of those beautiful babies would be a great addition to our family and fill the big hole left.
Simeon, love the message in the background on your phone. It shows you guys are under another authority because of your ethics and compassion. The fact you have another person an opportunity to fix door jam and you didn’t rag about it shows much!
Without the heat shield on those headers, especially at the top that heat is going to start melting the plastic engine cover that’s in the back of the car you gotta put some kind of heat shield back on those he the regular exhaust. Had he shield on it he did that for a reason…..😳😳😳🤔🤔
Solvents bleeding through causes that issue when painting as well. I learned the hard way years ago to make sure you get all the solvent off and give the plastic and fiberglass pieces plenty of time to completely dry and vent out. What helped after cleaning was leaving the parts in the paint booth with the heaters on for about 10-15 minutes.
Time to say yes to the goonzquad! 😮a watch ! Well I'll be dipped just a schosh though . Wow nice 👍. Have fun rebuilding the vett when your done you'll be amazed by how much you have to do to finish up the car lots of things only dealership can handle .
Awesome job guys just got some of my merch today. It’s the same color as the corvette lol hope all the pups find good homes and awesome job pops on the wiring . Take care 😊
Funny how they claim these 'give aways' are to give back to the viewers but it's really just about making a return and taking more money from y'all 😂 thanks for all your love and money folks
I don’t understand the varying amounts of hate for the giveaways. I mean they get good revenue from their online store, and a large amount of viewers individually spend a little pocket money for some merch that they might’ve bought anyway, except it gives everyone a chance to win some really cool shit. It’s a win win if you ask me. I just wish I could participate, because where I live is always excluded from contests like this.
I hope you do whatever you need to do to make sure you find the best and most suitable homes for those beautiful pups. You can't just sell to anyone who can afford them.
I love how they try to BS people by saying the fisheyes were caused by the humidity. Fisheyes are caused by contaminants, usually petroleum based contaminants but it ain’t from humidity 🤣
Was worried when you guys were putting new wheels and tires on the raptor, but those wheels are a perfect match. They look great! I don’t think you guys need to do anything else, it’s a thing of beauty as it sits.
I'm a big fun of your builts and your contacts...love have you keep us all entertained. I'm going to be in your area tomorrow and would love to me yall and your dad...love you guys keep up the work and your dreams
I miss the time when you guys did normal cars. Giving away watches worth insane prices I think is giving the wrong message to normal people. An expensive watch is not what I need. I need basic stuff.
@@VividVision_ it’s the truth I know it hurts but you know it is what it is they are simply trying to hard all the way around not just with the watches but even with the giveaways on the vehicle at 30 times the entry that tells me nobody’s buying their shit like they want. 😂
@@crowntsp it doesn’t hurt lol. Trying too hard? Nothing wrong with the hustle and grind. It’s simply business. I think you’d probably be happy if you won a truck lol
It’s a shame Simon has that big new house, that gold digger, and a baby on the way, and he’s one of the most immature CZcamsrs I think I’ve ever watched.
Hello goonzquad, I love watching your videos and it’s kinda therapy for me waiting for a video to come out. It’s been more than 3 years i am watching your videos. I wish I could order some stuff but i live in different continent so sad life 😢 Lots of love for you guys from Pakistan ❤
I love your work boys. High light of my day catching up. I presume I must be many of many that watch from around the world (New Zealand) in my case. Any prizes in tour give aways for us worldly guys. Keep up the good work. 😎
Y'all are a class act! I love how you approached the side skirt "repair" situation. You didn't drag anybody through the mud. . . Just simply stated "You give somebody an opportunity and they miss it..." so well said. God Bless guys.
Agree. In this business many have an extra issue in regard to substance abuse. It’s tough to get reliable people. Just move on. Sure whomever did the work feels bad about it. Sure they paid them and parted ways.😊
yeah...wouldnt want to say anything that would hurt that scumbags feels huh smart guy?
The world is truly soft, if they suck don't tell them everyone gets an award.
Class act? These guys are a couple of 🤡 🤡
Pops did an amazing job rewiring the Corvette!
Pops to the rescue!
Pops is AWESOME!
Pops is the real hero to the Goozquad!
To bad they don't leave all the work to Pops and the egg heads could stay home to vape and play call of duty.
@@punchthem4582huh? They aren't lazy they clearly aren't afraid to work hard.
It's always nice to see you help local businesses succeed. Your parents must be very proud of you. You guys do an amazing job. Keep up the good work and give pops a raise.
Pops is THE MAN 🦾🦾🦾 and the puppies are adorable. Cam in C8 is 🔥🔥🔥
“You know what this means guys it’s going through a fence”😂 epic
Keep doing what your doing Guys !! You both are doing what you like never loose that sight !! Good luck in everything you do for yourselves and complete strangers 🙏
Having spent 17 years as owner of PBE Jobber, I can tell you about fisheyes. Use wax and grease remover, turn the rags often, don’t just smear the contaminants around. After that, do not touch the parts with bare hands, use inspection gloves if you must move them. Also, use wax and grease remover before wet sanding or you risk driving wax or silicone down into the substrate.
Initially I use wax n grease remover after washing car but then I wash the panel after final sanding and then use alcohol water solution instead of continually using wax n grease remover so I dont get any chemicals in substrate.
These guys are pretty good about that. An air dryer may be something to consider.
You can also add fisheye removal
@@suecobandito8954 they have an air dryer, a fancy one at that. They weren’t caused by moisture.
Don't waste your time on these egg heads..... They don't believe in proper prep and use garbage paint supplies gooonz style.
Props to you guys for showing the flaws as well as the when it goes right. Problems pop up and it’s refreshing to see CZcamsrs not afraid to correct it on camera!
Once in a while some smart and driven people just make it in a big way!
These boys here found a gold mine and its paying off big time!
But im happy for you guys! And it couldnt happen to nicer people, hard working and talented.and very lucky!
Count your blessings!
Great video as always!
That rocker panel looked like it was fixed with bondo and chewing gum! Some people have just no shame...
The repair guys REALLY screwed up. Had they done a bang up job the Goonz boys would have bragged them up and they would have gotten some free advertising directly to people that are interested.
That was awful and they knew it would go on CZcams ! How embarassing! They half assednit
@@Tairone1337They didn't use the "fixed" one. They had ordered a new one from GM but it was back ordered so they thought they would help out a newbie company by having them fix the old one. But the "fixed" one was not done well and during the time it was in the other shop the new one came in from GM so they used it.
Seeing how pops handled that wire job definitely explains why these boys are how they are. Hard workers, & take a lot of pride in their work as well.
You know the best thing about this is. You guys build and build. And the most love is. The give away. Brand new. .. and the more fans. ❤❤❤❤ Gotta love it . Blessed
That Vett sounds crazy. The watch is beautiful. Your pops is sure a handy person to have around.
Keep that grey girl puppy she’s going to be a special one!
Its just a dog bro
Hey guys! Watching from the Philippines! Much love guys!
Omg I love it. The build the pups. And the give away I love it all. 7 years watching and gets better every video ❤🎉❤🎉
Ever considered attaching a dehumidifier to the air intake for the paint booth? Would save you lots and eliminate the "fisheyes".
I said that 2 videos ago. They don’t listen.
@@FastLaneLyfe2 1/2 million subs, and 500k views on each video. If they spent all their time reading comments and acting on every suggestion they'd never get anything done.
any idea as to how much air that system is moving and what it would take to "de-humidify" it? If a downdraft paint booth is 16 feet wide and 14 feet tall, typical air velocity in the booth would be 50 to 100 FPM. For this example, let's use 50 FPM. (lowest estimate)The total flow through the booth (16 x 40 x 50) would be 32,000 CFM. Now go price a dehumidifier for that many cfm. Good luck. The best option is to wait for a good day. Patience pays off.
Fisheyes are usually caused by silicone contamination, also oil or grease on the panel can cause them too but humidity does not cause them.
@@AVB2 thanks for the knowledge. I hope the boys are truly reading all posts.
It's such a pleasure to watch you, the technology, the pets and, most importantly, the family. Thank you guys so much!
Pops comes through with the patience. Great job. The car sounds awesome.
Hey goonzquad supporting your channel to the fullest love the pups are getting big God blessing's to the family guys be safe Trinidad and Tobago in the Caribbean cannot wait on to finish the corvette starts up nice your dad did a great job putting them wires together take care guy's
Thanks for sharing another excellent video.🤙
That rocker panel looked like Elmo got at it
should have said the name of who sent that piece of crap back to you. I hope you didn't pay them.
Pops got some mad skills boyz! Your Pops is the man!
You guys do amazing job's on your builds and you guys go over board with your cars and trucks as well adding extra stuff to your vehicles.
Elezar, you have such a soft spot for that fiberglass rocker panel, we can all tell. God bless. 🙌🙌
"choppin." LOL I love it.
I have been watching/following you for years. Today I saw on your phone, a reference to your faith. You have been a light to the world through your actions, your honesty and your generosity. Do not be a glimmer of light to the world, be a light on a lamp stand for all to see. You've been richly blessed. Share that blessing and be a light.....
And its still emotional, animals will make cry out of love........wish you the best out of it......
This has been one of my favorite builds to watch……I cannot believe how much of this car is glued together……got to watch Simon crash it……. Seeing the upgrades…..yes definitely the best build……..oh yeah the cam sounds great!
Lol he didn't crash ...it was a structural test of the nose piece 😂😍😂🤣😂🤣
@@terrancegrant5573no, he’s just an idiot.
Yalls ability to overcome adversity is so admirable. Yall are very forgiving, because that rocker panel was terrible!!!😭🤣
i cant stop watching yall,my dream car right in front of me best 15 episode!!!!!!!!!
Love you guys man !! I SEE YOUR GROWTH SKY IS THE LIMIT
Fish eyes are caused by the paint flashing off the solvents in the booth with no airflow. You will notice it only happens to parts laid out flat, not the hung up parts. You need to keep the air moving through the paint booth until its flashed everything off. Then you can close it up and let it cure.
i always Lough when u flying those planes 🤣🤣
The raptor looks much heftier with the bigger tires and rims and nice rolex to match. The C8 sounds super mean with the exhaust and cam. Great work guys, take care 👌😊
could watch you guys all day long
pops is a legend !
Pops displayed a beautiful technique fixing those wiring plug ins,and good job dudes
Pops is on the spectrum.
The painted tail lights look SYC
I just wanted to say I love what you guys do, I watch all of your videos, such an amazing family! Much love up here from ohio.❤ You can send that raptor my way😊
Sweet! new wheels and tires are the bomb! Love them!!!
Daaannnngg son I need that truck
Fly it trough a fence 😂😂
Those puppies are gorgeous! Would love to have one! Our boy passed away late last year, and one of those beautiful babies would be a great addition to our family and fill the big hole left.
Pops is a Legend straight up always comes through,sending 🫶🏻from the uk 👍🏻
Simeon, love the message in the background on your phone. It shows you guys are under another authority because of your ethics and compassion. The fact you have another person an opportunity to fix door jam and you didn’t rag about it shows much!
Without the heat shield on those headers, especially at the top that heat is going to start melting the plastic engine cover that’s in the back of the car you gotta put some kind of heat shield back on those he the regular exhaust. Had he shield on it he did that for a reason…..😳😳😳🤔🤔
its ok. they melted the body on thier other cars from exhaust they slapped on. they dont learn.
That safety equipment youall are wearing is the best investment you have ever made !😊
Yes, I wish we had that in our channel. Having a positive pressure mask like that would be amazing for everything!
Solvents bleeding through causes that issue when painting as well. I learned the hard way years ago to make sure you get all the solvent off and give the plastic and fiberglass pieces plenty of time to completely dry and vent out. What helped after cleaning was leaving the parts in the paint booth with the heaters on for about 10-15 minutes.
Im on a basketball court watching this 😅
I'm on the toilet
I'm in bed
😂😂 One of your German Shepherd’s could have made a better job of that side skirt, who did you send it out to? Walmart.
Love to follow U for all those years..
U overgrone your specials/ to big for YT
Bey Goonzquad.
Time to say yes to the goonzquad! 😮a watch ! Well I'll be dipped just a schosh though . Wow nice 👍. Have fun rebuilding the vett when your done you'll be amazed by how much you have to do to finish up the car lots of things only dealership can handle .
No seat belt. Texting and driving. These guys just never learn and will pay a high price some day.
This channel is not for the poors at this point
Awesome job guys just got some of my merch today. It’s the same color as the corvette lol hope all the pups find good homes and awesome job pops on the wiring . Take care 😊
So much wish Canadians could enter the giveaway, that Raptor is awesome!
#greedsquad
Yep. That fiberglass work done to that panel.. wrong. Also used the wrong material. Not the cloth used for surfboards, but chop strain mat material.🤦🏻
Can’t deny that POPS is the man!
لا امل ابدا من مشاهدة فيديوهاتكم انتم راءعون استمروا يا شباب😊😃
Sickening the way you guys show off now
Stfu how are they showing off
@@mkrause45You stfu. If you can't see it, you're blind.
Funny how they claim these 'give aways' are to give back to the viewers but it's really just about making a return and taking more money from y'all 😂 thanks for all your love and money folks
I don’t understand the varying amounts of hate for the giveaways. I mean they get good revenue from their online store, and a large amount of viewers individually spend a little pocket money for some merch that they might’ve bought anyway, except it gives everyone a chance to win some really cool shit. It’s a win win if you ask me. I just wish I could participate, because where I live is always excluded from contests like this.
this raptor is magnificent!! too bad I'm in the French Riviera!! thanks for the video and can't wait to see this corvette driving on the road!! 🤟🇫🇷
Pops is the man. That guy can fix anything
All those watches they’ve giving away look exactly the same. 😂😂
Im a Timex guy personally...
Yeah, they all have numbers starting at 1 and go clockwise around a round base to the number 12! Amazing.
@@jlampcI’ll keep my Apple Watch lol. If I received the Rolex, it would be sold immediately
@@ryanjarrell4359same dude. 😂😂
Not a watch guy in general tbh.
i wouldnt want your style on any build to expensive to replace most ppl dont have the cash id sell right away
Do gloss PPF on the satin trim stuff. That wheel and tire combo looks perfect!
I hope you do whatever you need to do to make sure you find the best and most suitable homes for those beautiful pups. You can't just sell to anyone who can afford them.
I love how they try to BS people by saying the fisheyes were caused by the humidity. Fisheyes are caused by contaminants, usually petroleum based contaminants but it ain’t from humidity 🤣
Probably why they dont sell any of their builds !
Who cares dude? It’s an entertainment channel not paint school.
Honestly I loved all your builds since five or four years ago however honestly this one is the most boring one out of them all
Was worried when you guys were putting new wheels and tires on the raptor, but those wheels are a perfect match. They look great!
I don’t think you guys need to do anything else, it’s a thing of beauty as it sits.
Sounds amazing guys as always = killing the game
Money laundering 😏
Is anybody still buying their cheap Chinese junk for a 1 in 5m chance of winning that truck? 😢😅😂
Pops is the man. Patience is a virtue.
I'm a big fun of your builts and your contacts...love have you keep us all entertained. I'm going to be in your area tomorrow and would love to me yall and your dad...love you guys keep up the work and your dreams
I miss the time when you guys did normal cars. Giving away watches worth insane prices I think is giving the wrong message to normal people. An expensive watch is not what I need. I need basic stuff.
Sell it and buy basic stuff duh
Then get a job and buy it yourself.
Rather have the cash then a stupid watch ! Whoever gets the watch is going to sell it anyway !
Remember when they were humble enough to go to the junk yards and get the parts they needed themselves?
Stop crying…my god you’re soft
You guys are trying too hard with the whole Watch giveaway crap
Haters gonna hate
@@VividVision_ it’s the truth I know it hurts but you know it is what it is they are simply trying to hard all the way around not just with the watches but even with the giveaways on the vehicle at 30 times the entry that tells me nobody’s buying their shit like they want. 😂
@@crowntsp it doesn’t hurt lol. Trying too hard? Nothing wrong with the hustle and grind. It’s simply business. I think you’d probably be happy if you won a truck lol
@@VividVision_ you have to buy the merch in order to win their try hard products 😂
@@crowntsp I am aware
Cool can't wait for the next project...
I'm sooo tired of the giveaways! 🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨
It’s a shame Simon has that big new house, that gold digger, and a baby on the way, and he’s one of the most immature CZcamsrs I think I’ve ever watched.
These two work harder in a month than most ever will though? Almost ten years at it now and doing something right..
I got the hoodie that pops is wearing in this episode! I love the color it's awesome! 😊
That Chop is crazy bro you guys killed it with that cam kit 😍😍😍 completely changed my perspective on the C8
Gay
You weren’t fooling anyone.
fake ''giveaways''
Just got some entries in. Lets gooooooo! Corvette is going to be incredible!
First dislike 🎉🎉🎉🎉🎉
THOSE RIMS ARE SICK!
Hey boys Vet is going to look epic Sounds like a beast kudo to Pops for helping Out .
Great Great job guys god bless you and your family. ❤
Hello goonzquad,
I love watching your videos and it’s kinda therapy for me waiting for a video to come out. It’s been more than 3 years i am watching your videos. I wish I could order some stuff but i live in different continent so sad life 😢
Lots of love for you guys from Pakistan ❤
your videos are so nice. Keep up the good work. God bless ❤
That Raptor R dominates 😍
Loving the wheels on the Raptor.
Paint match the bumpers & fender flares on the Raptor R and some power steps to make it look 👀 elegant and sporty 🙌
Definitely a straight piped exhaust 🤯🙉
I love your work boys. High light of my day catching up. I presume I must be many of many that watch from around the world (New Zealand) in my case. Any prizes in tour give aways for us worldly guys. Keep up the good work. 😎
that quote from billy at 3:46 is such a treasure!
that’s right keep up the good work👍🏼💯
I love all you guy … Papa is the best ❤❤❤❤