Toplink Adjustment for Rear Blade
Vložit
- čas přidán 17. 12. 2017
- I go over how to adjust the top link for use with a rear blade.
~-~~-~~~-~~-~
Please watch: "Kubota BX Grading and Filling Hole"
• Kubota BX Grading and ...
~-~~-~~~-~~-~ - Auta a dopravní prostředky
Great video i gained some knowledge thank you. I am new to tractors and am learning and have quite a long drive way.
I am glad you learned from my video. I also have this video showing using a landscape rake and box blade.
czcams.com/video/fsXvxnlVbiU/video.html
Great video! Been getting lots of snow here in Maine with another 12” coming today. Turning the blade around and driving forward has been perfect for those light snow days of 2-3” and light cleanup. I have a gravel driveway and I don’t want to cut down to the gravel in winter so the short link setting in forward position is great for winter applications. BX2370 with LandPride RB1560 Blade. Thanks for you informative videos!
Thanks! I'm glad the tips helped.
Hey thanks - very timely- just used mine to plow a little snow this weekend and i didn't realize i could turn it all the way around and then drive forward. I was digging into the gravel here and there so had to lift it out of float but will try it turned around. Cheers and thanks!
I did some plowing in this video. It is probably tough to see how it works.
czcams.com/video/fG9E9zYvq_Q/video.html
Got it and took a look- I was able to see it ok. Thanks for spending the time to dig this up for me - I will give it a try for sure. Cheers!
i dont mean to be off topic but does any of you know a way to get back into an Instagram account??
I somehow forgot the account password. I would love any tricks you can give me.
@Kenzo Lionel instablaster :)
@Zahir Dexter thanks so much for your reply. I got to the site through google and Im waiting for the hacking stuff now.
Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
Great information thanks.
Thanks
Great info keep up the great work ! Being in a wheel chair i like to put a hydraulic top link or make a top and tilt set for the Kioti i know it is over kill be i would be nice not to have to get off the tractor ! Have a Merry Christmas and a Happy New Years ! Kioti Curt :-)
Thanks Curt! A hydraulic top link would be a huge asset for you. It would not be hard to make one. Agristore has some that are pretty cheap too. I hope you have a Merry Christmas and Happy New Year too.
Thank you brother!
Your welcome!
Good show !
Thanks!
Great video. How about a video on changing a used blade?
I just bought a used scraper. It's mud season here in Quebec after all the heavy snow and massive rain.
My horses are shredding my dirt path and the tractor is leaving deep tire impressions (MF 184-4) is it better to flip the blade backwards and drive forwards to best fill in the deep ruts? Or run it straight on a less aggressive cut?
Do you mean changing the cutting edge on the blade or attaching the blade to the tractor?
I would have the blade forward and drive forward with the toplink short, then if you need more cut, just lengthen the toplink.
Great vid, same blade on a Kioti subcompact. Do you think the side to side float (by removing the rear pin) is a better alternative to constantly adjusting side 3PH linkage/leveler if you regularly change blade angle? Plowing (forward) snow from a blacktop driveway.
Removing the pin would cause some wear on that part of the blade. If you driveway is short, and you only plow a few times a year, you probably will be fine. If you have a long driveway I would not do it. You could also add a couple of grease fittings to each side of the blade were it tilts.
often an extended toplink is used with a double edge box blade, to bring the forward facing blade above the ground level, and ride the rear blade, in a non cutting, back blading fashion to smooth ground without removing material.
Yes, it is.
Really helpful thanks
I'm glad you found the video helpful!
Of course using the right blade would be beneficial too.
Thanks for watching!
What length top link are you using here?
I am using the one that came with the tractor.
longer toplink length more aggressive cut, shorter is less aggressive
Yes, if the cutting edge is facing forward and you are driving forward.
@@TractorTech goofy, aren't you.
What size top link you are using
I am using the one that came with the tractor.
@@TractorTech and which one is that?
My 5 foot rear blade drags on right rear tire. Tried adjusting still rubs
It sounds like the frame is too short on your blade.
YOUNG MAN ,
BOX BLADE SCARFIRE WILL CUT DITCH BETTER THAN STRAIGHT BLADE / U THINK ?
It depends. I'd rather use a scraper blade with an offset so the tractor does not have to run in the ditch.
Too Much wind noise.
Sorry.