Do You Know How to Paint over Paneling? If you use the wrong paint, it will flake off. In this video, we explore the proper Painting Primer to Use for Paneling, and we discuss Painting Cabinets.
The stuff in the bath you asked about & scratched was called grasscloth. It’s wallpaper & came in all types of textures & colors. It was very popular in the 80’s-90’s.
Ok, so I've actually painted our half wall paneling in our basement. Semi gloss white with the top half gray. It came out great! Looks super modern and like we paid a lot of money for beadboard. All you have to do is two coats killz primer where you hit the grooves first with a brush then roll the primer over everything. then two coats white or whatever color you decide. our paneling was pretty dark and that covered really well. you can't see anything. also, sanding is not a needed step if you use primer first. Our paneling was super shiny and just by doing what i already said, we've had no problems.
Thanks for the tip. I've been looking at house to buy but really put off with the ugly dark paneling on a few properties. Looks like it's an easy solution 🙂
So this video doesn’t show them painting the paneling. They explain the process they went through. 1) used pole sander & 100 grit sandpaper. (Paying attention the the shine in the paneling becoming duller & that’s when you know it’s ready for priming) 2) used bonding primer, estimate cost $56 USD /gallon 3) Used lots of paint I don’t think the video is completely useless. They mentioned a couple things I didn’t know about.
Nice job guy, looks ok. Now the ceiling and carpets look worse by comparison. Too bad the homeowner did not hire out to redo that ceiling and floors. 😂
I appreciate the way this guy Tim explains.. I know enough about painting paneling to know Tim is very knowledgeable about it.. there are faster and cheaper ways around painting paneling but if you want it done right, listen to and do what my man Tim says here !!
Nor very informative. I do not want the groves to show in the paneling, if I want texture I would rather use a texture roller, otherwise it will just look like painted paneling, which I am trying to avoid. I have a liquid deglosser from Sherwin Williams, filling the shallow groves with Dap, using a sponge fine sander for sanding the Dap, wipe the walls with a damp cloth, then Kilz oil base bonding primer $24 from WalMart, tape off and paint.
The only other thing that’s just as bad as having the ugly ass wood paneling in a home is painting over it and still having the ugly vertical lines. My old 40s home has Wood paneling that the previous owners painted over. I am trying to find a solution to redo this and get rid of the ugly lines.
Really ? Im wanting to paint my “UGLY brown paneling , and i was happy when i came across this , but now sadly i left just as ignorant on how to paint paneling . I saw u paint some sheet rock. ( did i spell thnat right lol )
Wow this video didn't explain anything. Luckily I just painted a house with panelling. I swapped the panelling for sheet rock in the kitchen but in the living I found 2 coats of I very good primer (I used kilz with the blue and white label) and at least 2 coats of paint should do the job. I used 3 coats of paint but I didn't sand the panelling at all and it turned out nice.
OK guys let me save you seven minutes of your life: 1. Light sanding 2. Bonding primer There ya go! The entirety of the actual information in the video, and it didn't even appear until 6:16 !
Don't take this the wrong way, but you ruined the place. It looked much better before with the wood paneling. Just my 2 cents. I guess I'm one of the very few that prefer the 70's aesthetic to bland white, sterile interiors.
So you tell us this video is for those of us who want to know how to paint paneling. Then you bugger off to visit a guy who is working with sheet rock. And then we come back and all the paneling is painted. Who did it? The paint fairies? More importantly, how did they do it? Waste of time.
Also sometimes I share this, the Bible says that GOD loves us so much that he sent his son JESUS CHRIST to this earth and HE lived a perfect sinless life.And JESUS went to a cross and gave HIS life for us.And rose again in 3 days and who ever will receive JESUS AS THEIR SAVIOR AND ASK HIM TO COME INTO THEIR HEART AND FORGIVE THEIR SINS,HE WILL TAKE YOU TO HEAVEN.
It's the sight of old hinges on the cabinets and the knobs!!!! We are used to hidden hinges now a days. They should have ar least changed the cabinet handles too.
The stuff in the bath you asked about & scratched was called grasscloth. It’s wallpaper & came in all types of textures & colors. It was very popular in the 80’s-90’s.
Your very stunning 😍
Thank you!! Iv been looking for the name of that for a year now!
Ok, so I've actually painted our half wall paneling in our basement. Semi gloss white with the top half gray. It came out great! Looks super modern and like we paid a lot of money for beadboard. All you have to do is two coats killz primer where you hit the grooves first with a brush then roll the primer over everything. then two coats white or whatever color you decide. our paneling was pretty dark and that covered really well. you can't see anything. also, sanding is not a needed step if you use primer first. Our paneling was super shiny and just by doing what i already said, we've had no problems.
Thanks for the tip. I've been looking at house to buy but really put off with the ugly dark paneling on a few properties. Looks like it's an easy solution 🙂
What kilz primer did you use?
@@locofoto75 I'm a professional painter I have transformed dozens of houses with those panels into beautiful rooms
Your very stunning 😍
You forgot the part where you show how to paint paneling.
I mean... yeah....
LMAO
😂
Am I the only person who actually likes wood paneling? I love that 70's stuff.
This is the most non informative video I’ve ever watched.
Im more interested in what Tim is doing! That spackle job looks fun.
Thanks for wasting 7 minutes of my life by not actually explaining how to paint paneling.
Still looks icky in there.
Beats living on the street though.
So this video doesn’t show them painting the paneling. They explain the process they went through.
1) used pole sander & 100 grit sandpaper. (Paying attention the the shine in the paneling becoming duller & that’s when you know it’s ready for priming)
2) used bonding primer, estimate cost $56 USD /gallon
3) Used lots of paint
I don’t think the video is completely useless. They mentioned a couple things I didn’t know about.
This is our paneling video "there is absolutely no paneling in this room"
The cabinets look great but the walls still look awful. White paint on the walls would have looked better.
Maybe so...but had to do what the customer said!! They pay the bills.. ;)
I hear ya lol. Its still a great instructional video on how to do it.
Not helpful.
you did not explain anything, waste video.
tim looks like the DEEZ NUTZ guy lol goteem
Tim said your in his way he's busy right now
Nice job guy, looks ok. Now the ceiling and carpets look worse by comparison. Too bad the homeowner did not hire out to redo that ceiling and floors. 😂
Thanks god for comments ...saves me 7 mins of my life
I appreciate the way this guy Tim explains.. I know enough about painting paneling to know Tim is very knowledgeable about it.. there are faster and cheaper ways around painting paneling but if you want it done right, listen to and do what my man Tim says here !!
Thx...Tim is great!
I really enjoy plans from wood prix.
Your very stunning 😍
Nor very informative. I do not want the groves to show in the paneling, if I want texture I would rather use a texture roller, otherwise it will just look like painted paneling, which I am trying to avoid. I have a liquid deglosser from Sherwin Williams, filling the shallow groves with Dap, using a sponge fine sander for sanding the Dap, wipe the walls with a damp cloth, then Kilz oil base bonding primer $24 from WalMart, tape off and paint.
The only other thing that’s just as bad as having the ugly ass wood paneling in a home is painting over it and still having the ugly vertical lines. My old 40s home has Wood paneling that the previous owners painted over. I am trying to find a solution to redo this and get rid of the ugly lines.
Really ? Im wanting to paint my “UGLY brown paneling , and i was happy when i came across this , but now sadly i left just as ignorant on how to paint paneling . I saw u paint some sheet rock. ( did i spell thnat right lol )
Wood paneling on every wall!?!? Carpet in the kitchen ? Just tear down the whole house and start fresh ! 😂
What a transformation 😳😳
Exactly what I thought. It looks like shit. The ugly vertical lines. That’s what the previous owners did in my house and I hate it.
I like the old paneling.
Why did you have to sand if you used the bonding primer?
Anne, that is a great question, and one I wonder about myself!! My guess is that it gives it "even more" grip to the slick walls....
Your very pretty 😍
Wow this video didn't explain anything. Luckily I just painted a house with panelling. I swapped the panelling for sheet rock in the kitchen but in the living I found 2 coats of I very good primer (I used kilz with the blue and white label) and at least 2 coats of paint should do the job. I used 3 coats of paint but I didn't sand the panelling at all and it turned out nice.
What is Tim patching the walls with in the other house?
Easy Sand 5
OK guys let me save you seven minutes of your life:
1. Light sanding
2. Bonding primer
There ya go! The entirety of the actual information in the video, and it didn't even appear until 6:16 !
Include two coats of primer
And two coats of paint
Just use oil base paint and its done
I have those type of walls all around my house
How much would it cost to paint all of that?
Got em...lol
I did it myself. I used Woodprix woodworking plans for this.
Your very stunning 😍
Ceiling looks dirty, or shall I say looks horribly nasty
Yikes! This home is a brown wooden 1970's time capsule. What was wrong with the 1970's people? So much brown wood everywhere!
i love 70s wood paneling.
Ew.
Thanks for the comments. I skipped right away 😂😂😂
Hi
Dude said 2 coats of primer. BS. Sand it then 1 coat of primer and 2 coats of paint. Simple
did you forget to fill the cracks
Don't take this the wrong way, but you ruined the place. It looked much better before with the wood paneling. Just my 2 cents. I guess I'm one of the very few that prefer the 70's aesthetic to bland white, sterile interiors.
I learned almost nothing. 🤨
My husband uses these plans from Woodglut and is very happy with them. However. I love yours!
They used the same old hardware.
There is NOTHING ugly about it.
holy H_____ you dont even hold still enough to actually see the surface
How or you
Well that was useless. And after all of that they didn't change the hardware!!!
So you tell us this video is for those of us who want to know how to paint paneling. Then you bugger off to visit a guy who is working with sheet rock. And then we come back and all the paneling is painted. Who did it? The paint fairies? More importantly, how did they do it? Waste of time.
Also sometimes I share this, the Bible says that GOD loves us so much that he sent his son JESUS CHRIST to this earth and HE lived a perfect sinless life.And JESUS went to a cross and gave HIS life for us.And rose again in 3 days and who ever will receive JESUS AS THEIR SAVIOR AND ASK HIM TO COME INTO THEIR HEART AND FORGIVE THEIR SINS,HE WILL TAKE YOU TO HEAVEN.
If you learn one thing from this video, I hope it’s to watch this one instead: czcams.com/video/5FJ1jmKzqt4/video.html
LEARNED NOTHING.
i dont like the finish color
Sorry to hear that
summer breeze ha
No offense but I don’t like the end result
👎
How to do a video on something you have no idea how to do. Nor show how to do. Waste of time!
7 minutes of time totally wasted!
Wtf???
it still looks old and dated
summer breeze because they left the same cabinets. Probably could've changed the doors on them
Should have painted them white or blue but when they change the floors and appliances it should work. The yellow looks as outdated as the panels!
crazyy one I 😍😍😍😍 the cabinets.
I think changing the hardware would help A LOT!
It's the sight of old hinges on the cabinets and the knobs!!!! We are used to hidden hinges now a days. They should have ar least changed the cabinet handles too.
Useless video, nothing to do with how to paint paneling.
Video is much more ugly than the paneling