Really helpful Tutorial and thank you. It would have been really great if you had added the setup for push notification to mobile phone. You do demonstrate the mobile receiving the notification. Thanks a million. Pete
I did from 5.26 onwards , you tick the notify surveillance centre box. As long as you have allowed notifications on your app it will come through by ticking that box. Cheers
@@anoopnair6376 really depends if you have the outputs on the back of the machine. Alternatively you could get the flashing siren cameras which will either flash or sound when movement in the areas selected
very good vedio sir. would like to ask u all dvr's hav this option?? i have Ds-7116hqhi.k1 with 13 ,2mp dom and bullet cams. can u conferm that this setting is present in my dvr. pleez
Hi, thanks for your effort, I was wondering whether an accusense dvr will do the vca functions on a video stream from a basic hikvision ip camera added to it? or does the ip camera itself have to have the accusense feature? thank you
Hello I set my line crossing outside my gate and the DVR doesn't beep when someone cross the line I try it over and over & it doesn't work it only work in my bed near the dvr
Hi, I have a DS-7608NI-I2 but I don't see the VCA Show button on the GUI. How can I get this effect to see the outlines of the zones directly on the NVR interface without using a browser or the IVMS4200 program.
You can only make 1 line per camera. Depending on what machine you have will dictate how many cameras you can have it on. Some 4 channel machines only allow 2 lines max and other machine 4 cams can have 4 lines . If an ip system you can have as many as you like. Hope that helps.
@@DACSecurity Thanks for the reply. It is the 16 channel Turbo HD DVR 7200 series. The menu looks exactly like the one on your video. Looks like I can draw 6 lines in total. I have 3 on one camera, 2 on a second and 1 on a third. It doesn't allow more.
If its an accusense machine you can use the motion detection to create lines. Have lines on all cameras and as many as you want on each. I'm assuming you are making the lines to send alerts to your app etc so this would work a treat. Just set recorder to record 24/7 and use the motion to send alerts. Its kinda a wee trick to overcome only so many lines. Sadly you can't have the line crossing on when you use the motion detection.
@@DACSecurity i've accusense 7208 with 5 cams. All channels with movement detector for start recording. cameras have Smart event line crossing or invasión área. Totally 3 line crossing and 3 área invasion for 4 cameras. The fifth camera can't set Smart event and the DVr tell me i must disable the Smart event on the other cameras. I think the dvr doesn't have max Smart event, at least it should not be 6. Why hapen that? Some channels doesn't support Smart events? Sorry for My English.
Great video! I have an ids-7208huhi-m1/s but I have a dog in my home, can't use the intrusion detection or anything like that 'cause the system is detecting it as a human, no matter what setting I use it always detects the dog.
You can use the "Size option" and You can draw a min or max área. That give You the chance to select the Size of the screen that You ignore, ie the Size of your dog.
Is there a way to adjust the length of the recorded notification video clip? I have line crossing setup and one camera it’s 10secs and another cam the clips are 2mins etc.
Hi, Been looking to find how this process can be achieved with v3.6 of IVMS, there doesnt appear to be any line drawing facility I can see. Version 2.8.2.2 works fine, this is with device DS-7204HQHI-K1 .... Any ideas on how to do this.. with the new IVMS or .. am I missing something.. Good tutorial.. Cheers Paddy
Does the intrusion box need to be setup so people have to enter it for it to trigger? What if someone comes through a door and is within the drawn intrusion area? They will have entered the area without crossing the line.
Hi I have 3 ptz and a pdome camera the nvr is a ds 7600 series not sure if these have face detection or vehicle detection I. Trying to set up vehicle detection but can’t find a way also my set up page is totally different to yours mines just the hikvision one any advice would be appreciated if poss
Hi, There is different software versions out there but any of the line crossings etc are usually found in the events area. If the features are not there it's because there not available for that camera type. Thanks
Sadly on older machines cant be avoided. The rain and snow is a problem. The latest machines have human and vehicle detection so makes a difference in these cases.
great video.. so you have to wait in order to view an alarm on the phone, i get a failed to search the video. is this normal or do i need to add something? thanks
If you get a notification and your really quick to get onto the app and click playback, you can get a failed to play message because the notification video clip hasn't stopped recording yet. Give it a little extra time and you should be good to go. If the video notification isn't quite ready and you want to see just click live view.
I keep getting an error message when i want to enable line crossing and i dont know what it means. it says "Not enough resource for human body analysis engine." can you assist please I have an analytical camera. The setting use to be on but then i disabled it because the neighbours cats kept setting it off and now i want to enable it again but i get this error
Hello sir..one question pls. You can have intrusion and line cross detection at the same time right? But do they work well at the same camera but at the deferent areas?I asked that because I have some problems. I did everything you show us in your video and 1st if I enabled human detection, it did recognise human 5/10 times.either in cross line or intrusion. If I dissemble the human recognition it seems To work much better but only if I increase sensitivity. And then it notifies me for everything including dust... At night things are much worse.even if I enable human recognition with increased sensitivity it does the job 6/10 times.i remove that future and it is the same as before..I have to mention that I'm also at smart event. I really do not know what to do. Please help me..thank you
Hi, depending on what system you have yes you can have both lines and intrusion switched on. You are better having human switched on as without you get many false alarms. It will pick up everything included rain , leaves blowing in the wind etc. even though human is switched on you will still get some false alarms sadly but far far less. You might be better switching line and intrusion detection off and using motion detection instead. You can select multiple area, create lines like line crossing but highlight only the areas which area most important. Also select human to filter out the rubbish. Hope that helps a bit and thanks for watching
Non Accusense you can get 1 line only on 1 camera but only maximum of 2 cameras. So if you have 4 camera system you can only get 2 lines not 4. Accusense you can get 1 line per camera but you can do this on a maximum of 4 cameras. This is the same if you have 8 camera machine still on 4 lines available. Hope that makes sense. You can get an Accusense machine and turn the Accusense part off so its just like a normal model and get the extra lines that way.
thanks for sharing. I have a accusense camera but the intrusion and line crossing buttons you are showing are grayed out on mine. Do you know how I can get access to this?
@@DACSecurity yes it’s a DS - 2cd3348g2-LISU on a DS -7716NI - M4/16P NVR. I bought that camera cause it said it had accusense in it so I thought it meant it had all those features. (Trying to understand the differences in the hik products has been tough)
@@DACSecurity I figured accusense meant it had those features but guess not. Is there a good place to find info on the detailed features these cameras have?
Very good video sir..tnx to u it's very helpful to me and others..👍
Very useful, thanks.
Thanks so much for taking your time to do this. Has helped me greatly.
Really helpful Tutorial and thank you. It would have been really great if you had added the setup for push notification to mobile phone. You do demonstrate the mobile receiving the notification. Thanks a million. Pete
I did from 5.26 onwards , you tick the notify surveillance centre box. As long as you have allowed notifications on your app it will come through by ticking that box. Cheers
Thanks so much for your reply. P
@@DACSecurity Is there any way I could connect an external alarm to the DVR? something similar to a siren or a Flasher?
@@anoopnair6376 really depends if you have the outputs on the back of the machine. Alternatively you could get the flashing siren cameras which will either flash or sound when movement in the areas selected
@@anoopnair6376 if you look at one of our earlier videos you will see a demo of the flashing camera
awesome tutorial thank you for this
Thank You!!!!!!
Great video helped me out thank you keep it up !
Analiză inteligentă Hikvision
Really helpful, Thanks
very good vedio sir.
would like to ask u all dvr's hav this option??
i have Ds-7116hqhi.k1 with 13 ,2mp dom and bullet cams. can u conferm that this setting is present in my dvr. pleez
Sorry thats not a machine we have used so not sure. You wojld just have to look in the menus for it.
Hi, thanks for your effort, I was wondering whether an accusense dvr will do the vca functions on a video stream from a basic hikvision ip camera added to it? or does the ip camera itself have to have the accusense feature? thank you
Hello I set my line crossing outside my gate and the DVR doesn't beep when someone cross the line I try it over and over & it doesn't work it only work in my bed near the dvr
Hi, I have a DS-7608NI-I2 but I don't see the VCA Show button on the GUI. How can I get this effect to see the outlines of the zones directly on the NVR interface without using a browser or the IVMS4200 program.
same
Hi, is there a limit on how many lines you can make? O. The third camara I set up it gives me a notification to remove others
You can only make 1 line per camera. Depending on what machine you have will dictate how many cameras you can have it on. Some 4 channel machines only allow 2 lines max and other machine 4 cams can have 4 lines . If an ip system you can have as many as you like. Hope that helps.
@@DACSecurity Thanks for the reply. It is the 16 channel Turbo HD DVR 7200 series. The menu looks exactly like the one on your video. Looks like I can draw 6 lines in total. I have 3 on one camera, 2 on a second and 1 on a third. It doesn't allow more.
If its an accusense machine you can use the motion detection to create lines. Have lines on all cameras and as many as you want on each. I'm assuming you are making the lines to send alerts to your app etc so this would work a treat. Just set recorder to record 24/7 and use the motion to send alerts. Its kinda a wee trick to overcome only so many lines. Sadly you can't have the line crossing on when you use the motion detection.
@@DACSecurity i've accusense 7208 with 5 cams. All channels with movement detector for start recording. cameras have Smart event line crossing or invasión área. Totally 3 line crossing and 3 área invasion for 4 cameras. The fifth camera can't set Smart event and the DVr tell me i must disable the Smart event on the other cameras.
I think the dvr doesn't have max Smart event, at least it should not be 6. Why hapen that? Some channels doesn't support Smart events? Sorry for My English.
Great video! I have an ids-7208huhi-m1/s but I have a dog in my home, can't use the intrusion detection or anything like that 'cause the system is detecting it as a human, no matter what setting I use it always detects the dog.
Thanks and yes I have the same problem at home, ticking human box seems to still pick up max (dog)
You can use the "Size option" and You can draw a min or max área. That give You the chance to select the Size of the screen that You ignore, ie the Size of your dog.
Has anyone tried using their mobile app feature, to selectively trip the relay / alarm outputs ?
Is there a way to adjust the length of the recorded notification video clip? I have line crossing setup and one camera it’s 10secs and another cam the clips are 2mins etc.
No adjustments I’m aware of
Hi,
Been looking to find how this process can be achieved with v3.6 of IVMS, there doesnt appear to be any line drawing facility I can see. Version 2.8.2.2 works fine, this is with device DS-7204HQHI-K1 ....
Any ideas on how to do this.. with the new IVMS or .. am I missing something..
Good tutorial..
Cheers
Paddy
Does the intrusion box need to be setup so people have to enter it for it to trigger? What if someone comes through a door and is within the drawn intrusion area? They will have entered the area without crossing the line.
Should trigger just the same as in the box area
Hi I have 3 ptz and a pdome camera the nvr is a ds 7600 series not sure if these have face detection or vehicle detection I. Trying to set up vehicle detection but can’t find a way also my set up page is totally different to yours mines just the hikvision one any advice would be appreciated if poss
Hi,
There is different software versions out there but any of the line crossings etc are usually found in the events area. If the features are not there it's because there not available for that camera type. Thanks
That's easy. Let's see how good it perform when there is change in lightning due to the sun/shadows and rain/snow. I bet you get tons of false alerts
Why I get parameter error when enabling it?
Hi DAC Security, on smart event, what settings do I need to avoid notifications coming in due to snow, rain drops and wind blowing bushes etc? Thanks!
Sadly on older machines cant be avoided. The rain and snow is a problem. The latest machines have human and vehicle detection so makes a difference in these cases.
So do I have to setup to see the number 2 on the top right? I don’t see it
The number only appears when someone has tripped an alert . So on the video someone crossed the line twice
great video.. so you have to wait in order to view an alarm on the phone, i get a failed to search the video. is this normal or do i need to add something? thanks
If you get a notification and your really quick to get onto the app and click playback, you can get a failed to play message because the notification video clip hasn't stopped recording yet. Give it a little extra time and you should be good to go. If the video notification isn't quite ready and you want to see just click live view.
I keep getting an error message when i want to enable line crossing and i dont know what it means. it says "Not enough resource for human body analysis engine." can you assist please
I have an analytical camera. The setting use to be on but then i disabled it because the neighbours cats kept setting it off and now i want to enable it again but i get this error
Are you using other features like motion detection on that camera or line crossings on other cameras
Hello when i finish the draw and all of the setting then i click apply and it say to me " parameter error" , how can i fix that?
Not sure on that to be honest, never seen that happen
@@DACSecurity thank you very much .
Is this only for IP cam?
camera: 2CE57H0T-VPITF
dvr: Ds-7204-huhi-k1
Data sheat of dvr say “vcr on analog and ip”, manual say “only ip”
Hello there I try the line crossing on my DVR outside my gate and walk in the line and the DVR doesn't beep why
Not sure, hard to say as I can't see how its setup. Have you tried moving the line closer or adjusting the sensitivity
Another thought, you did tick the enable tick box ☑
WHAT IS THE MODEL OF YOUR IP CAM? MOST OF THE REVIEWER ARE NOT MENTIONING THE CAMERA MODEL TYPE THIS KIND OF FEATURES...
These are not IP cameras, it's the dvr that has the features. Thanks
@@DACSecurity ah ok so its not nvr..thanks by the way im intalling now an IP cam...hikvision DS-2CD2663GO-IZS 6MP..
Difference between motion vs intrusion detection
Hello sir..one question pls.
You can have intrusion and line cross detection at the same time right? But do they work well at the same camera but at the deferent areas?I asked that because I have some problems. I did everything you show us in your video and 1st if I enabled human detection, it did recognise human 5/10 times.either in cross line or intrusion. If I dissemble the human recognition it seems To work much better but only if I increase sensitivity. And then it notifies me for everything including dust...
At night things are much worse.even if I enable human recognition with increased sensitivity it does the job 6/10 times.i remove that future and it is the same as before..I have to mention that I'm also at smart event.
I really do not know what to do.
Please help me..thank you
Hi, depending on what system you have yes you can have both lines and intrusion switched on.
You are better having human switched on as without you get many false alarms. It will pick up everything included rain , leaves blowing in the wind etc. even though human is switched on you will still get some false alarms sadly but far far less.
You might be better switching line and intrusion detection off and using motion detection instead. You can select multiple area, create lines like line crossing but highlight only the areas which area most important. Also select human to filter out the rubbish.
Hope that helps a bit and thanks for watching
Informative tutorial - thank you. Can you do a similar video but with AcuSense?
Hi and thank you for your comment. I will be recording AcuSense demo and video loss demo next weekend so keep an eye out.
I am looking for a non acusense dvr,I think this is the one!what model number is it please?
You are correct it is a DS7208 if its an Accusense it would be a iDS7208 hope that helps. Cheers
👍
Can you draw the multiple cross detection lines on this model?(the non acusense model)
Non Accusense you can get 1 line only on 1 camera but only maximum of 2 cameras. So if you have 4 camera system you can only get 2 lines not 4.
Accusense you can get 1 line per camera but you can do this on a maximum of 4 cameras. This is the same if you have 8 camera machine still on 4 lines available.
Hope that makes sense.
You can get an Accusense machine and turn the Accusense part off so its just like a normal model and get the extra lines that way.
@@DACSecurityThank you..how do you go about turning that acusense part off?
thanks for sharing. I have a accusense camera but the intrusion and line crossing buttons you are showing are grayed out on mine. Do you know how I can get access to this?
It means those functions are not available. Is this an ip camera
@@DACSecurity yes it’s a DS - 2cd3348g2-LISU on a DS -7716NI - M4/16P NVR. I bought that camera cause it said it had accusense in it so I thought it meant it had all those features.
(Trying to understand the differences in the hik products has been tough)
@@hunterajones if it’s grayed out sadly that feature isn’t on the camera
@@DACSecurity I figured accusense meant it had those features but guess not. Is there a good place to find info on the detailed features these cameras have?
@@hunterajones www.dvs.co.uk/ and download data sheets
IP camera 2 MP