BRIGHTEST RAM TRUCK LED INTERIOR DOME LIGHT EVER
Vložit
- čas přidán 30. 07. 2024
- BRIGHTEST RAM TRUCK LED INTERIOR DOME LIGHT EVER we remove the factory LED dome courtesy map lights on this ram pickup truck and install these LED panels to fix the flickering led lights that are problems on these trucks we went extreme this time with the 24 led chip boards to see how much light we would get but the smaller boards are more than enough light
Click HERE for the 24 chip LED boards
amzn.to/3qpRTyp
Click HERE for the 9 chip LED boards
amzn.to/2U47p6Y
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#RAM #TRUCKS #MOPAR - Auta a dopravní prostředky
Click HERE for the 24 chip LED boards
amzn.to/3qpRTyp
Click HERE for the 9 chip LED boards
amzn.to/2U47p6Y
Support BoostedMotorsports by JOINING Today! czcams.com/channels/3B_Q1mNw1iuS8KkAZi_fUA.htmljoin
**Checkout other cool products Boosted Motorsports has tested and recommends HERE** 👇
www.amazon.com/shop/boostedmotorsports
I installed these LEDs 6 months ago and they have worked very well so far. For assembly of the light assembly, I used hot melt glue at the posts. It's seems superior to using crazy glue and is easier to remove if necessary in the future.
I did this install over the weekend in my 2014 Ram 1500 Ecodiesel and I can't thank you enough! A year or two ago when I went to replace the bulbs, I thought I was SOL and Dodge told me I would have to buy a new assembly to replace their dull, flickering LED's. Now I have these installed and they are BRIGHT!
Thanks a lot for this vid, I had bought the peanut led bulbs probably 6 months ago, only to realize they wouldnt work(or so I thought until this vid) saw this at 1am, and ran out to my truck and pulled out the crap led module and replaced with the led peanut bulbs!! Now I can actually see in my truck at night .. took like 10 minutes to swap out!! Awesome!
What peanut bulbs did you buy out of curiosity? Those led boards are bright but look cheaply made.
These ones amzn.to/3ByTl7l
Could you do one that shows how to change out the bulbs in the rear seats, when you lift them up?
I would also like to see this! I took off one of the caps and almost lost the bulb and had a tough time fishing it back.
Saw your first video on this years ago and finally got around to doing the upgrade. Loving it! Thanks so much for sharing your knowledge!
Finally Did My Upgrade wit the LED Lights (24), Your video was on Point!!! Thank You for that. Only exception is that I have the Sunroof Connection which was kicking my ass! at first but I was finally able to disconnect it. The 24 LED are perfect for me not too much overkill. So far everything is good very satisfied.
Very nice those lights are great for at the track trying to read faded time slips lol
I like it! Looks good
Nice! Is there any upgrades to the little ambient light that's in front of the switch for the rear window?
My truck looks like that I love it.
Those are some brightass lights for sure! Very cool!
Can’t wait to do this to my ram
I like it!
Super bright, can't say I like how it looks though. Those chipsets do work awesome for the underhood light though.
Have you tried replacing the back one?
I have 2017 Laramie long horn I am not able to remove/ open it to start with. You had an old video but I was for a different trim. any help
Thank you for your guides a lot! Can you please tell a recommendation on remove or not catalytic converter on ram 1500 iv hemi 5.7? Thank you anyways!
Yo! I recall seeing your video on the led bed light but can’t find it again. I have an 03 Ram 1500 and want to upgrade to the super bright LEDs. Any suggestions?
Just use an led T10 bulb. Unless you are landing planes like this guy, they are plenty bright enough.
Did I miss a episode thought we would see you fabing on the headliner????? Looks good though!!!!!!
Thanks for the great video as always. Do you have a video of you changing the small cup holder light in the same console to a brighter LED light?
Man that setup looks like a flood light not just dome lights 🤣
Love this videos! Following one of your other videos, I did the fog light replacement last weekend. Now you've given me my next project. Keep up the great work!!
hey John let's pretend you have a 2013 poverty sled (QC Tradesman) and only the one dome light in the center of the ceiling. What LED do you recommend?
Does it still work by pushing on them to turn them on individually with this set up?
Awesome video can you do a video on the back seat light please? Make it blue
I swapped these out today on my 2015 ram 1500, I did 4 lights the two map lights and I replaced the driver/passenger side floor lights, those where a direct plug and play with a two pin female plug then just stuck them on. I think they are perfect for the floor lights but the map lights are way too bright for me at night and if I turn one on have that residual light artifact like when you look at the sun! Anyone find ones that aren't maybe such a flood light and more focused, or recessed them in the light more?
Also I had old laptop and xbox screws, using those along with a pilot hole to hold down the silver plates.
Are you doing the back one also?
I love your videos. Super clear and simple. I find them very useful!
Can you tell me if the backseat light can be upgraded with the same LED panel or we need different size?
Best regards from Poland
So. Did the brightness wear on you, or are you thinking about going to the dimmer version? As always, I enjoy watching your videos. Great stuff!!!
😏👉🏼 little details HUGE DIFFERENCE it makes the interior look more modern
Looks great, gotta do the back to match
Yessir thats next
That looks so blue 😩😩
I like how my name is on the box thing
Its dope and too bright at the same time
A lot brighter then stock but I don’t know if it’s the camera they looked kinda blue I’ve got bright white ones in my 5th gen looks like daytime at night inside it
i’m really picky with my LEDs, i don’t even do 6k white because that’s a “cool blue” color, i feel like i’m in a cold storage.
5k white is the perfect white.
couldn't you put a led 194 in its place?
24 worth is still ? Or should I go with 9
Did you get tired of the 24 LEDs? Lol you went from 9 to 24 so what's the best!?!? Thanks for your cool 4th gen Ram content!
It’s pretty brutal but I got used to it lol
No that’s not to bright I put leds in my Dakota what a world of difference now you have to change that back interior light lol
I did it d*** that she's bright I don't know if that's overkill or what I'll let you know in a week or 2
RAM- Our plastic will sound like it is going to break and sometimes it does.
I just wish we didn't have to take ALL that apart
Have you seen the video where the guy changes out the little white LED cup holder light with a red one? Perhaps something you may want to tackle and make a video on?
czcams.com/video/7Xk1fYvi5iM/video.html
First?
Excellent video! You did a great job going through all the steps for the removal and replacement of the map lights. I had one map light that was burned out (LED) so I decided of course to remove both of them and replace them with the 24 LED lamp. But I will say the Speed Clips on the upper console on my 2018 2500 Laramie was a Pain in the A$$! I thought I was going to break the upper console. It was sooo stuck, it felt that it was glued in...but it wasn't. The dealership wanted $675 to replace the one burned out LED, which I said hell NO! I was hoping that my truck had the incandescent bulbs, which I had planned to replace with LED bulbs...But no dice. My Laramie has the factory (weak) LED interior lights. Word of caution....the push in sockets were very tricky. You REALLY have to make sure the metal leads touch the socket and stays firmly in place.