I wish I could give you a million subscribers!! Just want to say thank you so much for your video on this fuel pump in this car! Your attention to detail, the way you communicate and the close-ups that you give on the video, they were all so far above and beyond anything else I found. This was THE BEST instructional video that I could find. And I say that knowing how difficult it must be to think about your audience while you're fixing a car. I can't imagine the headache and frustration and everything else that goes into making a good video while you are are fixing a car. And you're encouragement! I gotta kick out of your encouragement, and I needed it. Everything that you talked about helped me plan and prepare and know that this can be done if I give it enough attention, have enough patience, and keep trying. Your wisdom came through the video. Thanks again. I was able to get my 2008 Hyundai Sonata fuel pump removed and replaced without taking it to the mechanic. You're the best!
Just one fyi I saw another tech do was mark the spots with pump and holder with a marker to put back in exact same spot! Other then the fyi, great job!
This saved me hundreds of dollars. Took me a while but your video and instructions worked great. Put some lube under the ring to be able to hammer it back in place. Thank you man! Keep making videos!
Did you use the old lock ring? mine is a 7 of 10 after hitting it with a brass brush and brake parts cleaner. I was gonna soak it in krud kutter rust remover. It's in the freezer until I get daylight and it's not raining.
I finished the job today and reinstalled a 3200 watt sound system. I used the old rusty but cleaned up lock ring. It's only 18 bucks for the new lock ring on amazon. However this job took long enough for the parts to come and it was a full day thunderstorm right after the parts came. I froze the lock ring for 48hr and got it started very fast, all tabs started and a new O ring seated like a Queen. Then i used pb Blaster at each claw and knocked her home. I then used crc electronics cleaner to clean up the pb blaster. Thanks so much for the video, I'll subscribe with my 50 alts too.
Thanks bro! Parts not coming until tomorrow by 10pm so I went at the ring with PB Blaster a STEEL screwdriver and a STEEL hammer. Even though I ordered the wrench. Only pu$$ E's and dead people are scared of sparks and gasoline. I did it while smoking a J. Since the parts won't be here till dark, I'll probably do the install by candle light. I did unplug the battery ground because I got a lot of car audio stuff back there. If not I'll install it Hellen Keller style after watching you do it.
I’ve looked at a dozen videos on this and yours was by far the most informative! I will definitely subscribe to your channel! Keep up the great videos!
Watched some other videos and wow... Scary is best description of them. Yours was Beginning to end, You start out saying If You can do it I can do it, & I almost believe you. I have always been kind of Jinxed with Auto Mechanics - or fear I am anyhow. I think I might try this. You come smack me and help out if I blow it? Nice video and thanks for caring about your job. Always Take you time & Never Force anything. Thanks
Hi, i have sonata 2009 I replaced a fuel pump, but still the empty fuel tabk gas light not coming on, and the gauge is bouncing the full and empty, any help I replaced with 2 fuel pump after market,
I subscribed to your channel because this video is so good. How much did the pump cost? How much did you charge to replace it? One of my coworkers asked me if I change the fuel pump in his daughter’s 2016, and I’m trying to figure out a fair price to charge them. I also told him to get a diagnostic test done to make sure it’s the fuel pump and not something else.
You know they make a wrench for that it's a special wrench and other mechanics have it you can find it on a Mac Tool truck on a Snap-On truck and online
If you try to do this on a gdi engine you will regret it!!! There is a hose with a wuick disconnect in the tank that mis be dosconnected before you can even attempt to remove it. Idk if this 2012 tank shrunk or the pump swelled but that mf was bigger than the hole to get it out. I took the pump apart to get it out. I plan to use a razor knife to make the hole a very little bit bigger so i can get the new one in but i am dreading it. Ive been working on cars for many many years. This has been very vwry very difficult. I REALLY DONT RECOMMEND YOU TRY. YOU WILL REGRET THE DISCISION. The non dgi pump shown herebis much easier.
Most realistic video on fixing a serious problem on a car. Didn't make it look very easy, but also made it look possible for a average joe.
It gets alot easier with the right tools. They make a special wrench for the fuel pump lock ring.
I wish I could give you a million subscribers!! Just want to say thank you so much for your video on this fuel pump in this car! Your attention to detail, the way you communicate and the close-ups that you give on the video, they were all so far above and beyond anything else I found. This was THE BEST instructional video that I could find. And I say that knowing how difficult it must be to think about your audience while you're fixing a car. I can't imagine the headache and frustration and everything else that goes into making a good video while you are are fixing a car. And you're encouragement! I gotta kick out of your encouragement, and I needed it. Everything that you talked about helped me plan and prepare and know that this can be done if I give it enough attention, have enough patience, and keep trying. Your wisdom came through the video. Thanks again. I was able to get my 2008 Hyundai Sonata fuel pump removed and replaced without taking it to the mechanic. You're the best!
Thank you
Without videos like this one my car would still be messed up!!
Just one fyi I saw another tech do was mark the spots with pump and holder with a marker to put back in exact same spot! Other then the fyi, great job!
This saved me hundreds of dollars. Took me a while but your video and instructions worked great. Put some lube under the ring to be able to hammer it back in place. Thank you man! Keep making videos!
💯
Did you use the old lock ring? mine is a 7 of 10 after hitting it with a brass brush and brake parts cleaner. I was gonna soak it in krud kutter rust remover. It's in the freezer until I get daylight and it's not raining.
Yeah, but no rust on mind. Just wiped it clean.
I finished the job today and reinstalled a 3200 watt sound system. I used the old rusty but cleaned up lock ring. It's only 18 bucks for the new lock ring on amazon. However this job took long enough for the parts to come and it was a full day thunderstorm right after the parts came. I froze the lock ring for 48hr and got it started very fast, all tabs started and a new O ring seated like a Queen. Then i used pb Blaster at each claw and knocked her home. I then used crc electronics cleaner to clean up the pb blaster. Thanks so much for the video, I'll subscribe with my 50 alts too.
Great video, instructions are very well explained. Thanks!
Nice work man, thanks for the vid definitely helps 🙌🏽💯
thank you very much for uploading this.
Thanks bro! Parts not coming until tomorrow by 10pm so I went at the ring with PB Blaster a STEEL screwdriver and a STEEL hammer. Even though I ordered the wrench. Only pu$$ E's and dead people are scared of sparks and gasoline. I did it while smoking a J. Since the parts won't be here till dark, I'll probably do the install by candle light. I did unplug the battery ground because I got a lot of car audio stuff back there. If not I'll install it Hellen Keller style after watching you do it.
great video bro, made it easy
Love it, thanks
Very good video and never mind what anybody else says you do your thing excellent mechanic
I’ve looked at a dozen videos on this and yours was by far the most informative! I will definitely subscribe to your channel! Keep up the great videos!
Thanks for the video!!!
Thank you for the help.
Appreciate it bro easy installation
Much appreciated!!!
Thank you so much it help❤
Watched some other videos and wow... Scary is best description of them. Yours was Beginning to end, You start out saying If You can do it I can do it, & I almost believe you.
I have always been kind of Jinxed with Auto Mechanics - or fear I am anyhow. I think I might try this. You come smack me and help out if I blow it?
Nice video and thanks for caring about your job. Always Take you time & Never Force anything.
Thanks
Appreciate that men I try my best that a piece of cake I believe on you can do it 💪🏼
Good jod loco your the man ! !
Thanks for the video, I think I can replace my pump in my 2010 Sonata. :)
Great video
Least your real, great video.
Good mechanic, teach easy
Any idea how to reset engine lite on dash after replacing fuel pump on 2012 Hyundai Sonata 2.4L, thank you!
Hi, i have sonata 2009 I replaced a fuel pump, but still the empty fuel tabk gas light not coming on, and the gauge is bouncing the full and empty, any help I replaced with 2 fuel pump after market,
Good job 👍
Do you drain the fuel in the tank or leave it in?
I like the way he did it
For the average person
Like it
I subscribed to your channel because this video is so good.
How much did the pump cost?
How much did you charge to replace it?
One of my coworkers asked me if I change the fuel pump in his daughter’s 2016, and I’m trying to figure out a fair price to charge them.
I also told him to get a diagnostic test done to make sure it’s the fuel pump and not something else.
Fuel pump idk how much it cost costumer buy it ebay has some fair price I charge $150
@@aaronmobilemechanictv7841 $150 for labor?
what was its milage ?
would this apply for a newer version like 2017?
Same think
You know they make a wrench for that it's a special wrench and other mechanics have it you can find it on a Mac Tool truck on a Snap-On truck and online
Good job buddy 👏👏👏. Just make sure... Did you use the older o'ring and a new one or just replaced it? Tks
??? Answer pls 😁
Boom.
Also you should have way more subscribers. Still scared of trying it myself though. Even though I know my fuel pump is a ticking time bomb.
CHECK OUT MY SECOND CHANNEL IT CALLED The Goodlife!!!
@@aaronmobilemechanictv7841 will do
Thanks I’m not paying no mechanic to do it when it’s that easy
It’s actually the opposite, the return is the one facing to the side and the feed is the one pointing upwards, and not the other way around
Pat on the back. ha ha
Hey man you do work in Sugarland richmond area
Yes I do
@@aaronmobilemechanictv7841 is there a way to contact you won't put all you information out there
@@ricky-pq1du FACEBOOK MONA KSERIES BY MESSENGER
@@aaronmobilemechanictv7841 thanks man
Use humer😮😮😮
If you try to do this on a gdi engine you will regret it!!! There is a hose with a wuick disconnect in the tank that mis be dosconnected before you can even attempt to remove it. Idk if this 2012 tank shrunk or the pump swelled but that mf was bigger than the hole to get it out. I took the pump apart to get it out. I plan to use a razor knife to make the hole a very little bit bigger so i can get the new one in but i am dreading it. Ive been working on cars for many many years. This has been very vwry very difficult. I REALLY DONT RECOMMEND YOU TRY. YOU WILL REGRET THE DISCISION. The non dgi pump shown herebis much easier.
you skip the part where you put the lock ring back on
GO SUBSCRIBE MY SECOND CZcams CHANNEL The Goodlife!!! czcams.com/video/WZe957O1-0I/video.html
Good jod loco your the man ! !