HOW TO REMOVE THE SHIFT SHAFT SEAL FROM A 9.9 15HP JOHNSON EVINRUDE OUTBOARD MOTOR
Vložit
- čas přidán 19. 03. 2023
- Today we remove THREEEEE shift shaft seals 2 different ways!
WE HIT 2000!!! THANK YOU ALL!! I TRULEY LOVE YOU ALL!!! ENJOY THE VIDEOS!!!
Please use my Amazon links to buy whatever you need!!
Welcome back to My channel!!
We work on boat motors, cars, trucks, and anything else i can find for CHEAP!!
Leave a comment I respond to EVERY ONE!!
If you have a suggestion for a repair on any of my current projects... let me know!! I will be performing work that you all put in the comments!! so LET THEM FLY
Tools I use on EVERY outboard,
coils: amzn.to/3kWZjp4
feeler gauge : amzn.to/3n2yuSf
Impact : amzn.to/2GqCMlm
Battery : amzn.to/30inEhl
Charger : amzn.to/33ghCzz
Spark plugs J4C
amzn.to/2GhpkAq
Push Button start switch I use
amzn.to/38D9vPG - Zábava
The threaded method allows to save the brass bushing when properly done. Once the tap starts to grab in the bushing, just do 5 turns. That should result in a total of 6 turns which is sufficient to pull out the bushing but won't go all the way through it. Regards !
Excellent advice!! Thanks for watching and commenting!!
Instead of the dedicated $80 slide hammer, use a 1/4-20 all-thread rod, the hammer off the cheapy slide hammer you may already own, a long 1/4-20 coupler (nuts will just strip) and some 1/4" fender washers. The all-thread threads into the removal tool, the hammer bangs on the washers which are stoppeed by the 1/4-20 coupler. About $10 in parts if you own a slide hammer, maybe another $20 if you don't.
love it!
Thanks for sharing, question on the threading method, I'm guessing you have to replace the bushing as well, right?
NO NOT AT ALL!! the outside of the bushing contacts the wall of the lower and is UN affected! just install a new o ring and Hammer it back in!!
Can you please share the part numbers of the removal tools & where to purchase?
give me some time Ill get that for you!
blind hole puller set
a.co/d/6Ml2QbP
slide hammer
part number 326002 or 0326002 gotta search ebay or crowley marine.com or boats.com
more to come
shift shaft remover
0304514 search google or crowley marine
I looked up the part on Crowley marine. They show a straight piece of stainless. Any chance you can verify please. I have been looking for the exact tool you got . Same for eBay .
Thanks