Sorry to be offtopic but does anybody know a trick to get back into an instagram account? I stupidly forgot my login password. I love any help you can give me.
@Finnegan Ricardo thanks so much for your reply. I got to the site thru google and I'm waiting for the hacking stuff atm. Looks like it's gonna take a while so I will reply here later with my results.
Nice video, and it's so cool you have your son helping with it. Great bonding time and what an impression to leave on your kid showing him to do stuff like this.
Thank you Soooooo much, I getting my seat cover and carpet replaced and I changing my carbon fiber console, I bought the replacement already and was about to get someone to install it. They were going to charge a extra 100.00 to install it but after watching you video half a dozen times I did it myself. I owe you one 😉😁
dude, without this video I would have never got this done tonight. Took me forever but I got it done. I few mistakes, but barely noticeable. I may get bored of the brushed titanium and redo it all in a few years. Thanks so much. Peace.
Thanks man!! This was super informative and exactly what I was looking for. My E39 was looking exactly like yours, wrapped trim, but not center console. Two thumbs uppp
Thanks for sharing this. My mint condition 2003 530i auto has this nice wood trim. Right now I am purchasing a 2002 manual 530i and this one has the CF inside trim. I will definetely swap the trims as I like the wood one much more.
For your problem with the vinyl pealing back, make sure you post heat any vinyl you do. This will take any memory the vinyl has and reset it to the new shapes of the pieces you wrapped. A good rule of thumb is to get the surface of the vinyl right around 180-190 degrees fahrenheit. I had problems when I first started to do vinyl but after figuring this out I have not had any problems yet.
jajajajajaja I have to agree with you on that. Yes, that's the best way of getting rid of the bubbles. I haven't used the glossy vinyl yet and I wasn't sure if it would be too glossy for my taste. I would rater use it for exterior. I'm thinking of wrapping my roof rack, if I do i'll make a video showing the difference on material.
Personally, I'm not a huge fan of the look, but the way you kept those diagonal lines straight on multiple pieces is great skill. Thanks for this instructional video, it was helpful in showing me how to remove the center console. The screw under the hazard button- I would've never seen that.
The ashtray door is just held in with four small screws, I found it very helpful to remove it. Other than that I think you did a good job, I completely messed up the button for locking the door so I might have to redo it some time...
yea those packages are a dream, I went with the gas saver 4 cylinder 4runner cuz money is hard to come by for a college student, eventually I'ma get the Highlander edition...those are badasses...but best of luck to ya man and thanks again!
Thanks.To be honest with you is really easy. This was my first big project. Other than this I had only done my trims. It look intimidating, but is easy. You should give it a shot.
Looks fricken great!!! Depending on the car I get, the trim is totally being wrapped in carbon fiber! To make your centre console stand out, I'd get a new shifter! (Although I'm sure you've already done that since you uploaded this video 3 years ago :P)
nice! thanks for the tips. How much should I buy if I wanna do my bmw trim and just shifter trim? It is only like 5 pieces of dash trim and the shifter trim and should I only buy 3m?
yep.. It'll be 4D. I already order it. If I like it enough I'll redo all the interior. But I think I'll start with the roof rack. And Thanks for the support
I recently wrapped this kind of trim . There was cracks in the trim and what you can do is take a razor blade and skratch them down nice and flat so that it wouldn't show in the vinyl.
Hey bro Thanks for the video finally going to get rid of the sticky stuff on the hazard and unlock/ lock buttons thanks. Would you happen to know what the purple cable and the other bigger cable under the center console. The purple ones seem like they connect to each other don't want to test it tho. Thanks bro
Nice video, it looks good. But is it possible to paint a clear coat on it when it's finished to make it look like real carbon fiber and make it shiny, or will the clear coat destroy the wrap?
I love that this young man includes his son in the project. Gives this old man hope for your future!
Sorry to be offtopic but does anybody know a trick to get back into an instagram account?
I stupidly forgot my login password. I love any help you can give me.
@Rory Emilio instablaster ;)
@Finnegan Ricardo thanks so much for your reply. I got to the site thru google and I'm waiting for the hacking stuff atm.
Looks like it's gonna take a while so I will reply here later with my results.
@Finnegan Ricardo It worked and I finally got access to my account again. Im so happy:D
Thank you so much you really help me out !
@Rory Emilio Glad I could help =)
Nice video, and it's so cool you have your son helping with it. Great bonding time and what an impression to leave on your kid showing him to do stuff like this.
Thank you Soooooo much, I getting my seat cover and carpet replaced and I changing my carbon fiber console, I bought the replacement already and was about to get someone to install it. They were going to charge a extra 100.00 to install it but after watching you video half a dozen times I did it myself. I owe you one 😉😁
Best diy tutorial for this in youtube for sure. Straight to the point.
dude, without this video I would have never got this done tonight. Took me forever but I got it done. I few mistakes, but barely noticeable. I may get bored of the brushed titanium and redo it all in a few years. Thanks so much. Peace.
Great video. Great to see a young kid doing work with his dad. His a great worker, keep up the awesome work kid, i know pops apreaciates it alot.
Thanks Bud, just passing down the knowledge.
Well done on showing how to remove the parts you're working on.The carbon looks nice.
Thanks man!! This was super informative and exactly what I was looking for. My E39 was looking exactly like yours, wrapped trim, but not center console. Two thumbs uppp
This video made me a bit more confident about doing my e46, thanks dude.
Dane Wilbanks
Glad to heard that.
Cool getting little man to help out. I do the same with my son. Good job bro.
Great video, very informative, i like how you get the young one involved too
Your son is such a big help.. Great job buddy 💙💪🏾
Awesome that your sons helping you. Must be a big boy now👍👍
Great Job man, nice to see you let your son help you out and fit everything back in
Looks fantastic...now I will do the same, thanks for sharing...
Good job please keep making videos like this to show people that yes you can do this to.
Thanks for sharing this.
My mint condition 2003 530i auto has this nice wood trim.
Right now I am purchasing a 2002 manual 530i and this one has the CF inside trim. I will definetely swap the trims as I like the wood one much more.
Good job mang! Looks sweet. Off to do it on my 1 series
For your problem with the vinyl pealing back, make sure you post heat any vinyl you do. This will take any memory the vinyl has and reset it to the new shapes of the pieces you wrapped. A good rule of thumb is to get the surface of the vinyl right around 180-190 degrees fahrenheit. I had problems when I first started to do vinyl but after figuring this out I have not had any problems yet.
I just finished my bmw e39 console CF wrap, thanks man, if you were my neighbor i would get you a 24 pack of beer!!!!
thanks for the video, i was'nt sure how to take the console out, now i do, i'll get some wrap and give it a go, nice job by the way, looks great.
Great job, looks wonderful! Thanks for sharing... I've been looking for a good video on how to vinyl the INTERIOR of a car, thanks again!
Thanks, your feedback is appreciated it.
Dude that looks sick! I'll be doing my E36 soon!
Awesome product and awesome to see you out there w your son. Can't wait til my son gets old enough to work on my car w me.
good concise instruction with professional looking results
Good job! I enjoyed the fact that you let your son help.
Great video and excellent walk through! I am going to do exactly this at the weekend except with piano black vinyl. Subscribed for future E39 tips :D
Thanks for sharing; excellent job!
awesome job man, very helpful for those of us doing this for the first time
Thanks pal... And good luck
Your son did an awesome job. Big ups Lil man
Thanks! Used this to remove the center console on my m5. Appreciate it.
Super helpful video. I want to try vinyl wrapping for the first time.
Glad to hear that. Give a shot. Is very inexpensive.
Thanks dude, looks so sick. Can't wait to do this to my car this spring.
Thanks for the support.. Good luck on your project
jajajajajaja I have to agree with you on that.
Yes, that's the best way of getting rid of the bubbles. I haven't used the glossy vinyl yet and I wasn't sure if it would be too glossy for my taste. I would rater use it for exterior. I'm thinking of wrapping my roof rack, if I do i'll make a video showing the difference on material.
Thank you. Good work and God bless!
Thanks for the support. It means a lot..
your welcome.
I have always like them. specially the SR5 or the limited edition. I'll keep looking for one.
Personally, I'm not a huge fan of the look, but the way you kept those diagonal lines straight on multiple pieces is great skill. Thanks for this instructional video, it was helpful in showing me how to remove the center console. The screw under the hazard button- I would've never seen that.
Thats great you got your son to help! Simple things- being a better father
Kudos for your son helping!!!!!
I used a 24" X 60" sheet. That covered all the trims and still had some left over.
Thanks!! That was just the thing i was lookin for!
Great job man!! You do nice clean work.
Thanks man, ur support is appreciated.
Bro keep them vid coming . You are doing it! Each 1 teach 1 . Good lookin out .
Thanks man, I appreciate the support.
Like the other vid too . Cup holder .
Awesome video man, theres alot of vinyl wrap on a car i'm buying that needs re-doing. thanks.
The ashtray door is just held in with four small screws, I found it very helpful to remove it. Other than that I think you did a good job, I completely messed up the button for locking the door so I might have to redo it some time...
Way to go man! That was an awesome job! BTW, great parenting skill dude! Your kid is a great sport! 2 thumbs up buddy! Keep at it bro!
Boom. Good lookin' out. I ended up ordering some: 2' x 5'. Way more than I need, but gives me enough to practice and mess around with it.
Thanks.. I didn't know Walmart carry it. Cool. Good luck on your project.
i loved this video. lots of info and detail. thank you
Thanks bud, I try my best on sharing everything there is to know.
Thanks pal. He's a fast learner
yeah man, Is nice to pass on the knowledge into the new generations.
im going to be doing this tomorrow using your help thank you
Thank you! I really appreciate the response! ill be sure to check the video out...btw you will love the 4runner
Teaching them young ! 👌🏻👍🏼
I bought a 24" X 60" for about $18. That was more than enough to do all of my trim. And still had left over.
Thanks bud.. And your welcome. I bet your much happier now.
yea those packages are a dream, I went with the gas saver 4 cylinder 4runner cuz money is hard to come by for a college student, eventually I'ma get the Highlander edition...those are badasses...but best of luck to ya man and thanks again!
very nice tutorial thank you
Thanks! I plan on wrapping my wood too!
excellent tutorial. looks easier than tinting, or maybe you're just really good at it. thumbs up to that little boy!
Thanks.To be honest with you is really easy. This was my first big project. Other than this I had only done my trims.
It look intimidating, but is easy. You should give it a shot.
yeah, when I did this job 4D wasn't available. I saw your pic.. It looks nice. I'll give that 4D a shot soon.
Very nice job bro. Looks so legit. Can't even tell it's a skin.
You make it look easy,bro!!
Nice job. Very clean
Looks fricken great!!!
Depending on the car I get, the trim is totally being wrapped in carbon fiber!
To make your centre console stand out, I'd get a new shifter!
(Although I'm sure you've already done that since you uploaded this video 3 years ago :P)
Good video homie really helpful
This looks GREAT
Great Job, Looks awesome!
Thanks.. =)
cool stuff man :) I'm gonna try to do it on my Volvo XC90 as a part of re-visualization :)
Jozef Guzik Thank for the support.
Good luck, You will love this material and the look
Thanks man! we really appreciate it!
nice! thanks for the tips. How much should I buy if I wanna do my bmw trim and just shifter trim? It is only like 5 pieces of dash trim and the shifter trim and should I only buy 3m?
yep.. It'll be 4D. I already order it. If I like it enough I'll redo all the interior. But I think I'll start with the roof rack. And Thanks for the support
Great tutorial. Any issues with air bubbles, or do they go away on their own?
Looks sweet man!
Great vid it really helped me amor with my BMW ! Thankx
Awesome video dude! Good work! Car looks nice as hell! :P
Cool how you got your son to help. Good job!
Looks sick!
TheMovieCooperation
Thanks.. =)
I only bought a 24X60 and it was more than enough for all the trims. I even had a little left over.
thanks. No I have not tried clear coating it. But if you want a finish coat you should look into the 4D vinyl.
Hey, great video tutorial do you mind me asking where you got the dash screen?
Awesome video!
Thanks... =)
Good luck on your project.
good job! , imma do some trims on my car and imma eventually wrap my whole car
Wow!! good luck with that.. It's a huge challenge you got under your sleeves.
Great video! Where is the carbon fiber vinyl bought from? and anything to look for specifically, quality wise, when buying it?
great video buddy thanks
Thanks.. Glad it came handy
awesome work did you end up wrapping the shifter knob? or did you leave it in wood?
Still better than wood / +1 like for showing how to remove console
Good work, guys! Thumbs up!
Great video mate! your kid seems quite handy too! do you know if the centre control removal is the same for the E46 series?
you're a nice guy! good luck, wainting for your next job, i wish it will be with 4D Carbon.
your welcome pal.. your support is appreciated..
I recently wrapped this kind of trim . There was cracks in the trim and what you can do is take a razor blade and skratch them down nice and flat so that it wouldn't show in the vinyl.
Great video!
Thanks. Welcome to the Family
Cool :)
Awesome wrapping!
And cute your son !!
Hey bro Thanks for the video finally going to get rid of the sticky stuff on the hazard and unlock/ lock buttons thanks. Would you happen to know what the purple cable and the other bigger cable under the center console. The purple ones seem like they connect to each other don't want to test it tho. Thanks bro
Nice video, it looks good. But is it possible to paint a clear coat on it when it's finished to make it look like real carbon fiber and make it shiny, or will the clear coat destroy the wrap?