The BEST GoPro Helmet Mount Setup (for EVERY Helmet) | *Plus GoPro settings!*
Vložit
- čas přidán 19. 06. 2024
- FULL PARTS LIST - bit.ly/2x1m5bY (more links below)
So you want to know how to mount a GoPro to your motorcycle helmet? And you want to get the BEST audio setup so you can vlog with it? And you want to know the best GoPro settings for cinematic footage? You've come to the right place my friend. After 8 years of "motovlogging," THIS is the best setup I've ever had. It's clean, it's compact, it looks good, and even better, it gets REALLY good footage and audio. In this video, I'll show you the entire GoPro helmet mount setup so you can be on your way to the top tier of helmet POV quality. You'll learn the best GoPro helmet chin mount, how to get stable GoPro footage, the best GoPro microphone so your voice sounds clear and your bike sounds great, and how to wire your helmet to keep your setup clean and out of the way. ALL LINK TO PARTS YOU NEED ARE BELOW:
Chin Mount - bit.ly/2DAJ6Fy (click link and use code "MOTONOSITY" for 10% off!)
Helmet (Ruroc Atlas 2.0) - bit.ly/2Z0FEey
GoPro Hero8 - amzn.to/3i2ka8Q
GoPro Hero7 - bit.ly/3kdeevG
ND32 filter (for Hero5/6/7) - bit.ly/39Swupy (grab ND16 and ND4 for less sunny days)
ND filters for Hero8 - bit.ly/2DmheVX
Buckle Mount - bit.ly/2Dmbw6t
Locking Plugs - bit.ly/33p5zAj
Microphone Adapter - bit.ly/3fwTc7M
Microphone - bit.ly/33pUEX3
Wind Muffs (if you don't buy the above microphone) - bit.ly/3kd1Ls4
Bluetooth Headset I Use - bit.ly/30prl5c
For all parts I've used currently and in my previous setup, check this list: bit.ly/2x1m5bY
My previous setup video - • GoPro Chin Mount Motor...
++ 🛡️ PARTNERS I RECOMMEND 🛡️ ++
Luimoto Designer Motorcycle Seats - bit.ly/389Ip0W
Motovation Motorcycle Parts - bit.ly/3f4oZjO
Chin Mounts - bit.ly/2DAJ6Fy (click link and use code "MOTONOSITY" for 10% off!)
Quad Lock Phone Mounts - bit.ly/38snx6j
BrenTuning ECU Flash (Use my code MOTO to get 5% OFF!) - bit.ly/448bG7W
++ ⚙️ MY GEAR ⚙️ ++
My Street Gear - bit.ly/351XlwK
My Motovlogging & Camera Gear - bit.ly/2x1m5bY
My Dirt Gear - bit.ly/2VCv10Y
My Motorcycle Phone Mount - bit.ly/2zoGRTJ
++ 📸 FIND ME HERE 📸 ++
Instagram - / motonosity
Twitter - / motonosity
Exclusive Email Updates! - bit.ly/MotoNewsletter
Support the Builds on Patreon - / motonosity
++ 🏍️ BUILDS 🏍️ ++
300cc Honda Grom - bit.ly/Grom_Build
Yamaha MT-09 - bit.ly/MT09_Build
Honda CRF450R Supermoto - bit.ly/CRF_Build
BMW S1000RR M - bit.ly/S1K_Build
Honda Ruckus 171cc GY6 - bit.ly/Ruckus_Build
Yamaha R3 Streetfighter - bit.ly/R3_Build
Yamaha R6 - bit.ly/R6_Build
🎵 MUSIC
Epidemic Sounds - bit.ly/Motonosity_EPIDEMIC
📧 BUSINESS - motonosity@gmail.com - Auta a dopravní prostředky
thanks for this tip man. i have both hero 5 and hero 8. i'm going to try the settings you mentioned on my 8. I prefer using the hero8 for now because of the hypersmooth 2.0, it's way more stable and smooth especially here where I'm from where the roads are bumpy as hell! more power man! :)
Dude! This is the SPOT! I just ordered a Go Pro 7 twenty minutes ago... with almost Zero idea of how to make it work with my bikes, (or how to make it work at ALL)... and you just opened the DOOR, Bro. Thanks!
I am so glad I found this video. It is the most informative video I have found. I just got a Gopro 10 and I have been wondering how to mount it and also how to get good sound. You have answered all my questions. Thank you very much!
I got one stop solutions for all my confusions. Best way to mount a go-pro on helmet, a good idea about that dramatic effect (gained by playing with shutter speed and ND filter thing) and idea about settings for audio. Thank you so much brother, love from India!
Thanks bro I needed this video. I bought my 8 black back in December and haven't been able to find that sweet spot. Going to try and do the settings now
Thank you so much for this video! I just got mine today for the Sedici Strada II and love it!!!
Right on man, very useful info. I'm using a very similar setup and I agree hero 5 / purple panda combo seems to be a good mix. I use the Shoei GT Air 2 helmet and it actually has a lot of space around the mouth and it's very quiet. I didn't think about the space being a benefit till you mentioned that. Thanks!
Watching your video I picked up a gopro hero 5 for extremely cheap as the store was clearing out the stock👍 Thanks man!
Here’s an idea for a follow up video from this: Editing. Software and hardware used, techniques, and all the other stuff that goes into editing and publishing a video on CZcams. Just like camera settings it’s subjective, but like many other viewers I really like how you put videos together.
2nd the editing idea. It would be very helpful
i just started messing around with moto videos myself, if you are looking into a really good free editing software, check out DaVinci Resolved. Found out about it a few weeks ago, tried, video looks amazing. lots of feature and will render to through 4K unlike some other programs that say they do but dont. If okay with paying, i noticed everyone tends to go for final cut pro for mac or premier
just purchased a insta360 one x2 to get into 360 footage. followed your links and upgraded my hero 5 setup with the chin mounts, nd filters, and mic!
Thank you MotoNosity, that's what I was looking for :)
Thank you for this video dude !! You are awesome , i have the go pro 8 and i have problem with the wind noise , hopefully i will fix it , i try to get better and better !
Been a sub since 2015 and have waited 5 years for a video like this. It was a long wait. But thank you
Not only technical on the motorcycles' side, but also being technical on the video front! Thankyou very much for this informative video. Always appreciating all your efforts 😉
I know this is an older video but so helpful. recently been playing with ND filters and have always wanted that "motion blur". Thanks for sharing the settings and tips!
Thanks for sharing your experience. Awesome information.
Thank you this was my question on ur previous video now fully answered as a video.
Thanks for this great video. I'm looking for a set up and this really helped. Think I'll go for this set up. 👍
Awesome video bud! Very informative. Much appreciated!
Great video dude, have always wondered what the best settings are to use for the Gopro!
Ty soo much for the information and simple ways to get good quality motovlogs.
Thank you for this video! Super helpful
By far the best information video that I have seen. Nice one.
Outstanding video! Great content info. Excellent ride video! I would like to see your editing process. Thanks for a great piece of work.
This is awesome! Has all the info I was curious about.
Your tips has helped me lot thanks lot
Excellent video man, very helpful!
Cute. Nice setup. Thanks
The best video on Go Pro set up for.helmets i've seen.
You helped alot.. I will do some in my next Videos :)
You're the best motovlogger, hands down. Cheers from Taiwan!
Just ordered a gopro helment mount from chin mounts because of you 3/6/24 thank you
Thank you for your tips🤟
Really useful man... Thanks alot ❤️
Thank you so much you helped me out a lot 🙏🏽
Thanks for the tips man
Stopped the video @ 1:44 and went to order! Glad I found this video!
Really good guide man, thnx!
dope! Chin mounts had my MX-9 adventure helmet I was surprised as it doesn't have much room for a mount but they got it! should be cool. can't wait to get filming.
thanks man that was worth it
Been looking for a chin mount for my new Biltwell Lane Splitter - just picked one up from Chin Mounts, thanks for the recommendation, stoked to try it out!
LETS GOOO THESE SETTINGS ARE SO GOOD
JUST USED YOUR CODE! thanks!
Thanks for the awesome video and great content can’t wait for the next video
They have a chin mount for my helmet woohoo! Really helpful video, didn't even know this existed 💪💪
Make more vids like these. Helped alot brooooo
I've wanted to record my rides since I started riding and didn't know what to get so thank you, this helped a lot. I picked up a Hero 7 Black, ND Filters & a Chin Mount for my RF-1200. Can't wait to set it up!
I’ve got a similar setup, same helmet different GoPro, how do you go with audio? My external mic picks up too much engine noise from the bike - stock pipe and pretty quiet.
How do you like your Hero 7? Looking at one right now
@@colbyclark2479 It's been great. Never had any issues and the picture quality is amazing. I can't speak on the newer models, but I'd recommend the 7 for sure
BEST VIDEO FOR GO PRO SET UP! HANDS DOWN! Very detailed and can he get a round of applause for the links in the description. 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾
Thanks for the awesome vid
Thanks my guy.
Always wanted to know the settings of the helmet in your video. Thank you for share those with us!
I'm planning to post some video about riding bikes in Busan, Korea !
And your video helping me a lot to set my helmet! Thanks!
I'm so sad that I can't get your goods in Korea ;(
great brief! Thanks
I use a wrist mount on the chin. Have done for years, love it. Also love the 24fps
How does it work exactly? What does it strap to?
Thanks telling about camera mount for motorcycle helmet!
Great video man! I stumbled onto this looking for the best GoPro jetski helmet mounts for recording and nobody else came close to being this thorough. Do you think the side mount w/extension to the chin set would be the best set up for that type of video on the water as well? Thanks and best regards!
enjoyed the video!
Hey, thanks for the instructions! I was trying to learn how to do this and your video is the most helpful and comprehensive among all. I have one quick question regarding the ND filter for Hero8. Both PolarPro and Lenskins are using magnetic attachment for their Hero 8 filters which were reviewed to be not very secured. While those comments might be biased, it would be great and much appreciated if you could help suggest one to use.
Would be amazing if you offered the LUT as well. I recently picked up a used gopro hero 5 and I'm excited to put together a motorvlog set up based on this!
Hey, I think if you wrap your mt-09 as the same color of your helmet it might turn out great. Only a suggestion, since we haven't had Mt-09 content for a while. Love your videos, easily one of my favorite youtube channels. Haven't missed a single video of yours!
Just watching this vid for a good mount and realize you drove right by my exit at 10:00! ha, guess i have to sub
That ND filter is a game changer!
I have a pretty similar set-up, but with standard stabilization turned on (thanks to Indian roads lol)
And for some reason I get good enough motion blur around the edges despite being at 60fps so I didn't bother messing up with that. Just got this new setup, I'm working on my version of this video as we speak.
Thanks for this tho!
Much love.
60 fps is so much better imo.
I still have the hero 5 and it's still my favorite!
Sweet, they even had my bilt techno 3.0, I was about to give up and get a side one.
I recently just got his whole setup for my GT Air 2, one VERY important point: be sure you have the right type of microphone for your GoPro. It must have a 3.5mm / 3 pole plug (not a 4 pole plug that resembles an earphones plug). There are microphones that are 4 pole, but those only work on phones (that have a 3.5mm mini stereo jack) not a GoPro. The simplest way to know which is which is to count the number of black insulating bands on the plug: a 4 pole plug has three, a 3 pole plug has two. Be sure your GoPro mic has two black bands. Im using the GoPro Hero 5 so i needed to use the extra audio jack connecter that connects to the microphone jack.
Love the content.
Another option for ND filter is a company called Camera Butter. They stick on and off with a reusable sticky section. I use them for the gopro on my quadcopter. They hold up great to abuse as well.
Thanks 😊 For Sharing 😉🇵🇭
Damn I’ve been waiting on this informative video...And I have the herO 5 Black..Thanks BrO!! Ride SAFE!! ✌️’s 🏍💨💯 Edit: Man I would love to ride that 2020 R1!! I have a 2012
Great video been struggling with popping noises in my audio forever just rewired everything hoping the new setup plus a couple things I picked up here help. I’m running two mics and a splitter so maybe that’s it
What do you need to do in the settings for wind noise if you don’t want to set the microphone up (only the GoPro with the ND filter) ?? Love the video keep up the good work ❤️🔥💪
With the go pro 8 i put it in a media mod and avoided using that adapter for the mic. It's little nullify but beats having something else on the side of my helmet. It's a cleaner look.
Bro I just ordered my Ruroc Atlas 2.0 ... so stoked to get my helmet rig setup
Great video!!!
Didn't see the link or description for the 3m adhesive double sided tape. Which one do you use?
Enjoyed the video, good solid info, what do you think , now the GoPro 9 has come out, you still sticking with the 5?
내가 찾던게 여기 있었네. I love this video.
Thank you for sharing a great vlog. Can you please tell me how long your stock battery lasts on the Hero 5? If one is doing a long ride, what is the best solution for batteries. Thanks
Hey man, great video! Has there been any update to the GoPro Hero 8 ND Filter that might be more functional than a small magnet? Or do you know of any other motovlogs that can verify how the Polar Pro’s hold up at high speeds?
You’re awesome and been watching your channel for a long time. Just something to consider. If someone has a hero 7 or older then this setup works. But I found that for hero 8 all you need is a mount, panda mic and GoPro media mod, done. Easiest and best setup. Just a suggestion. Thanks for what you do.
i just got an 8 and need to order the panda mic and media mod. going to use my friend's gopro mount for the helmet!
Nice setup, thanks for sharing. Unfortunately that will not work on my Scorpion EXO.
Thanks for the info! Although, I hate will this two sided tape we have to use, especially on a $800+ helmet. You would like we could have bluetooth microphones to reduce all the wire and tape.
Might throw my setup together again and make a video for old times sake
Great video! Couple questions. I don't ride a sport bike so the motion blur "makes me look wicked fast" factor doesn't appeal to me. For a more easy paced, touring setup, what would you suggest for settings?
Also, I have a Hero 5 as well. How the heck do you get the little water resistant door off the side where the mic adapter needs to plug in?
Excellent and informative...I'm watching closely and it appears I could do the chin mount on a Shoi Modular helmet, yes/. What is your take on mounting this and mic on a modular helmet? I am currently using a Sena 10C Evo, and it works fine, but the battery drain is very high...
When recording audio, nothing worked for me until I got an external voice recorder with a limiter. Without a limiter you will have clipping at high speeds from your voice competing with the wind noise. Joining audio and video is not a problem with most video editors.
Have you ever attempted to connect audio via sena/packtalk? Also what about audio recorder around the pipe for more raw sound clips of the bike?
Concerning the nd filters, the magnets for the 8 are really good with speed, not so much when you knock it by accident with your hand... broke one today at a light 🙄
Great video .. will the mount work with a ruroc dx1 snow helmet?
Hey Moto, been following you since the sv650 days! Any chance you can share your LUT? Got a hero 8 for recording my track days, would love to have a similar look to your footage!
Nice bro👍🏻
Good idea on heating the glue pad with a heat gun before applying. I never knew that. I mount my second GoPro on the side of the helmet inline with my right ear. So that would be center side. I like my Hero 7 Black. I may get another? I was looking for a good used Hero 5 but people are asking way too much for a used camera. I may as well put a few extra bucks to the pot and get another Hero 7 Black when the price drops to 229 again......and it will.
Great video, full of good information.
Barry
Ordered one. Will see how that works
Thanks for the suggestion, got a new helmet and didn't want to place it on the top again.
Thanks
Can u do a basic how to video on editing and what software you use
Hey man , can you please expalin more about the nd filters, like what type they are etc please
Hey man great video. I'm looking at the liquid carbon atlas 3.0 due to the sale going on. I have a question about the shockwave, should I skip it and just use my packtalk bold? Specially to go along with this GoPro setup. What do you think? Shockwave or packtalk? And is the shockwave system compatible at all with the packtalk?
Cheers
I have mine very similar but with the gopro mount and small straight extender, I also sanded the extender and tips of the part with the rubber on so I can angle it back a little more, so close and clean on the front. I also use Sugru to stick it down strong, then mask it and paint it to make it a bit cleaner looking.
My mic adaptor is in a similar place too, but I've started using external audio again as either the gopro mic adaptor connector or gopro connector might be damaged. Audio is great until I accelerate or go above 50 mph and it just crackles and ruins the footage, I refuse to pay £50 for another adaptor, such a rip off, still gutted I can't use it all the time though.
My stereo mic works great sitting on top of the cheek pad, no tickling of my mouth or nose lol, it is a bigger mic though, one of those Sony ones, had it almost four years and still works great. I have got others including the PP that I've tried over the past couple years or so, but for me the Sony is better.
Omg thank you I had the side to chin and getting lvl was a pain
Hi, very usefull (as usual). A small question, how do I combine my mike from Cardo system with the mike from Gopro? Thanks
Hey!!! I bought my bike at woods too!! Aren’t they amazing!!