2014 Chevrolet Corvette Stingray Z51 - C/D Underbelly
Vložit
- čas přidán 23. 07. 2013
- We take you on a technical tour of the C7 Corvette.
Full test of the C7 Corvette Z51: bit.ly/13buWvm
Corvette Mega-Hub: C7 stories, dozens of archived tests, comparos, and more: bit.ly/11eyoZw
C/D Underbelly takes you on a technical tour of the coolest and most interesting cars that swing through Car and Driver HQ. - Auta a dopravní prostředky
Love how Chevy put in the extra work to make the Stingray so complex. Very nice.
Great to see up close what makes the new Stingray an outstanding automobile.
Fantastic to see under body shots and learn about that part of the car. Most reviews show you all the pretty stuff on the outside, loved it!
"We need more light in this garage, Captain!"
Great video. Tingwall does a good job explaining the tech that makes the C7 a great car and platform.
Great video. I love the detailed look at a car most reviewers will just drive and comment about. Keep it up!
Great video, it is cool to learn more about how the Corvette works. Well explained too, keep it up!
Seeing the technology of this car up close and personal with explanations is just as cool as the track review. C/D Underbelly is a valuable segment.
What a well done review so much more professional than most
Like the underbelly technical videos, keep them coming.
Good video! One of the first videos to go underneath the Stingray.
great coverage!
Love the detailed review - nice :)
Very good information,. I just borrowed my friends 15 Stingray and this experience of driving this Corvette has really changed my opinion of Chevrolet and the Corvette. I have a few small complaints but compared my turbo civic, supercharged CRX and VW 1.8T (all modified) This car is an absolute joy to drive. Kudos to Chevrolet and job well done.
civic? bahaha, not even the same league
Nice little review of the C7 Stingray.
this was very helpful to understand the new design of this corvette
Wow I love this, you should start doing this kind of review for a lot of other cars. Technical and different, I like!
thanks man! this video was really detailed
You are one cool Car geek :) Good review. I just love car tech and numbers :)
Fantastic video
Cool to finally find out how the magnetic ride control suspension works. I wondered.
Great video!
Any corvette video makes me 60% stiffer.
Good video! Thanks!
That was fun! I enjoyed "meeting" Don Sherman on video after reading his work for ages and ages. Cool!
wow..very informative video. i like the detail on it
what a poor lit video... the lighting seriously looks like you guys broke into a garage and needed to lay low.
I'm really enjoying my 2015 Z51, I went for the 8 speed automatic, fist automatic performance car I've purchased, happy with my choice. This beast is really well put together, draws tons attention and the handling is top notch and the transmission is excellent. Pleased with the power, if I ever decide I want to bolt on another 150Hp its a no brainer with the Edelbrock SC kit, for $7K.
absolutely stunning car, the z06 will be a wet dream!
This Car is FREAKIN Spectacular. Best Vette Yet. No Question about it. I can not wait for a C7 Z06
Nice video! Saw a couple at the dealer but they are probably special order/taken though.
If I remember Jeremy Clarkson saying in his days of racing they used leaf springs on there cars and turn ins were better and more controllable with the mon leaf .
I love the corvette and all the innovation !
I have an '11 ZR1 that I'm happy with. But the multimatic spool, the integrated MRC, TDC system that also uses tire temps really interests me. A rev matching 7 speed would be a welcomed addition too. And it's 60% stiffer? Very cool stuff.
Same here. I had never even considered owning a Corvette, but this new C7 has completely changed my opinion. I'd gladly have one....in electric blue I think.
A thing of beauty!
yeah they are really interesting. Nice to see how different cars really are and what manufacturers do to make cars corner and put the power down better. I hope they do a GTR. I'm a big fan
i love getting the real details
I have a '10 ZR1 and this car has me really excited. The electronic diff that's integrated into the stability control is genius. Look at the C7's at the strip and see how well this car launches. It comes pretty damn close to the C6 Z06 in handling performance. Add the improved interior & I think they hit a huge homerun with this car. I look forward to this car's big brother. I've already started putting money aside for it.
you don't own a zr1 .
Great info on the car I can’t believe how well made this vehicle is coming from an engineer and vette owner. Also side note the trimec transmission on a ss 1le was way clunkier in my opinion may just be my experience but the vette did it right.
very cool video
can't wait for the upgraded version...
Come on I want to see you guys track it. It's now a world class sports car so much technology such good styling. Man this car is going to kick ass.
I think we have yet again, another vette which will hold it's own very well on the world stage, putting up numbers with cars at twice and more the money while looking good and feeling good doing it. C7.R and the GT3 cars will also be very strong. Love the vettes!
when the car goes into the cylinder deactivation mode , does it go into the V4 as stated or is it actually going from One Bank to the other?
System of a Down at 2:58? That's what i'm talking about!! Really cool overview of the 'Vette by the way.
I agree for the most part I just feel that if you can make a engine with more displacement perform as well as an engine that uses revving or forced induction technology then it's a completely valid method of achieving performance. Neither's necessarily better it just comes down to preference and the racing heritage of the manufacturer.
A lot of people think the ls7 engine is huge because of its 7 liter displacement but the the engine fully dressed weighs 440 pounds and and makes 505hp and 470tq whilst the bmw s65 (the engine in the last m3 ;'0 ) is 4 liter displacement makes 414hp and makes 300ft of torque but weighs 445pounds. Oh and these numbers are streight from the manufacturer.
It must be love I swear!!
They mentioned the least important benefit of a dry sump oiling system. Yes it helps in high-g cornering, but more importantly it means the crankshaft isn't operating in oil (or even significant oil mist) which helps efficiency and power, and it allows them to lower the engine since there doesn't have to be space between the crankshaft and the bottom of the pan for 5+ litres of oil.
I'm impressed with this Corvette. It Looks great, has far more technology then the previous and seems well put together. now all they need is a dual clutch transmission and they would have a super car. If I didn't already have a gtr I would consider this car. Its very comparable to the gtr with a great price. Great Job GM keep it up!
Nice to see SOAD on the radio.
Yes, you are!
and this is why it is worth the price
Here in 2020 now I can actually afford one!!
Hats off Chevy, you really came through with this vette. Can't even argue about the lower power since you cut the bill in half. I would gladly take the extra 60k in performance mods of my choice!
7-Speed is already standard but i would love to see a dual-clutch with launch control as an option as well.
Nice car I gotta come up on that .
Absolutely the worst cost cutting decision Ford made on that car. Thanks for bringing it up
FYI in my 505 hp Z06 I achieved 30+ mph going 55 and 27+ mpg going 80 mph. Believe or not the C4 was getting over 25 mpg. This is a great car but Corvette has always made a great car.
Loving the direct injection. The physical size of an ohv is so much smaller its ridiculous. I have a sc400 lexus with the 4 cam 32 valve 1UZFE v8 and im doing an ls swap. There is alot of space saved as well as 75 lbs potentially and the COG is lower as well. Ohv engines are way smaller.
Pushrod engine = no OHV setup, so the heads are smaller, keeping the engine package smaller. That being said, they're usually limited in the # of valves per cylinder. Rather than being able to run 4 per cyl, they'll run only 2. volumetric efficiency would then go down. Given the hp/liter of each, the BMW engine makes a lot more in that aspect, but the corvette makes up for it with being able to increase displacement w/o adding too much weight or making the engine too big.
Pilot Super Sport tires summer only, crack in the winter, even in the cold garage
What you are saying is the firing cylinders liners and rings will wear faster then the ones that do not fire.
The thing is it takes hundreds of thousands of kilometers for any of them to start wearing significantly. Even my 2000 montana with 300k on it, the engine is perfectly sound.
Remember when the cylinders are deactivated it is in a low load situation, where wear and tear are the at the least.
Does the z06 or now released zr1 still have the same leafspring crap?
how would it do that? the cylinders still move so the wear would be the same as having them running
I can't wait to hear the other reviewers (you know the ones) talk about how terrible it is to have an antiquated leaf spring suspension like on a horse carriage. Then in the next sentence talk about how great the ride and handling are. You know it's going to happen.
Im guessing the rear leaf spring also acts like an anti roll bar !
to decide which is better as they were built for different needs.
does this 2014 Corvette have a Cacuum Booster or Electric Power Brakes
Large disp generally means more weight/engine size/mass cutting efficiency. Small disp, low rpm IS more efficient, just harder to achieve. F1 engine rule changes will mean running 1.6L V6 turbo/hybrid engines with the same power, 15k rpm limit, instant power, reliability (one race before rebuild) as the current V8s (and use less fuel). F1 engine makers are already doing the R&D on these now to be ready.
I have never been a Vetter fan... However the C7 makes me want one. Bad.
If i had the money i would buy this beauty
Lol, he got the two mixed between wet sump and dry sump. A wet sump is the one that prevents oil from sloshing to one side of the pant in hard corning.
This Corvette is just a sports car, but the ZR1 is a supercar.
The current S65 uses a 5.5L biturbo producing and extra 120 lb·ft over the LS7 450 (215 Ib extra with the performance pack). Even with a smaller displacement. Weight unknown
The infotainment system adds 30 lbs. to the weight of the car?!
HOLY CRAP!
What is that Double-DIN, Flat Panel Display Unit made out of? Lead?
There are definitely LS7's producing that kind of power to the wheels, and there are naturally aspirated LS7's producing around 750bhp. There are also FI LS7's producing up to 900bhp hp, but anything more than that would deteriorate and detonate pretty quick. No four-figure numbers.
Its made to reduce cost so more teams can compete but you still want the engineering side of things. Williams had a car in 1976 I think it was, 1.5 liter straight 4 with a turbo. 1500 hp. Its so far the world record for bhp per liter.
I do agree thou, if you want to look at the most technologicly advanced racecars in the world look at the Audi R18 E-tron
Who are the 31 D Bags who dislike this? The technology in this car is awesome. Getting it under 65k on a well appointed car is amazing.
wow. blows my 2004 c-5 away. good to see. bitter sweet. ha.
How much will a composite leaf-spring cost to replace? I am guessing only GM would sell them.
Welcome in the club buddy, a really big one i guess ;p
How many cars have you actually driven with it? im betting barely any/none
Yes, over 100 kg. An LS9 is over 200 kg, more like 220 kg and an F1 engine is 95 kg.
Add that to a car that weighs around 500 kg it will severly effect its performance.
And yes I do, I race Porsches in modsport and PCSR here in Sweden, but I havent mentioned that because anyone can make shit up on the internet.
Interesting question but I very seriously doubt that has not been taken into account by GM. The torture test their performance engines like no other big auto maker. I am certain they have ran multiple engines to the point of failure with multiple driving situations. If they did need to change up the firing order in eco mode it wouldnt be difficult to accomplish.
Large disp = bigger engine = more weight/mass. Large DOHC in V form usually allow extras to but put into the V space (turbos nowadays)
shit. it's growing on me. i thought it used to look too much like an italian, but now it looks just fine.
No,,, he got it right. Dry sump is the external reservoir. The wet sump is a traditional pump in pretty much every engine.
Anyone take a guess what happens when the foam in the floor boards go bad
Which LS?
They're also being pushed hard 100% of the time. fuel economy drops dramatically the minute you put your foot into anything. But you're talking about fuel efficiency in terms of mpg. what about thermal efficiency? or volumetric? or brake? or arbitrary?
All I can say people this corvette looks and acks like a sports car should beautiful car
Check out transverse leaf springs on wikipedia. They have:
Less unsprung weight
Weight is positioned lower
Also work as an anti roll bar
Are MORE expensive than normal springs.
They are better, don't take my word for it. look it up.
I can see where you might be skeptical of the "more reliable" claim, but if you were to compare a 6.2 DOHC of near identical layout to the LT1, you would find that the small block is more reliable because there are far less moving parts than a DOHC engine.
Here in 2020.
were is the Z07?
Why do people still complain about leaf springs? Reviews say that the car is very composed over rough pavement and has record braking grip levels.
Is he the Dentist from the Hangover movie?
60% stiffness? what does that mean?
I'm not comparing the cars, I'm comparing the engines. And it is larger in physical dimensions.
And there's thing thing called an engine swap. People compare engines when they look for one to put in whatever car they have. The most popular engine swap there is? LS. Into Porsches, M cars, Z's, Silvias, RX7's, 240's, off road vehicles, airplanes, helicopters, you name it.