Watched this video at McDonald’s when my phone didn’t have service close to a year ago. Made me hype to get mine one day just got one finally and I’m back this is some dope nostalgia. And bloody wheels is that dude when it comes to printed gun parts fr
@@Zxch_Grxver If your using a promag mag the first thing you blame is the promag. After you eliminate that than you can start deducing whats causing it lmao but rule of thumb if your running anything made by promag and have a issue blame the promag first youll be right like 80% of the time. Seriously people dont buy promag stuff they are such bad qaulity and break easily spent the extra few bucks and get the official manufacturer ones
I use the G3C & I carry it with the TAURUS 15 round magazine with the Bloody Wheels sleeve as well.I also can use the extended magazine with my G2C if I decide to carry it.
I know 12 people who have ran 100's of rounds in the G2C with the Promag 32 round and not a single jam at all right out of the box. Only person I ever seen it jam like that on was a dude that was using some weird ammo. I even ran 640 rounds thru it and not a single jam.
I bought 3 ProMag 15rd magazines for my G2c and they all work flawlessly. I also bought 2 ProMag 10rd magazines for my M & P Shield & they also work flawlessly. I think that with ProMag it's a hit or miss buy. Nice guns you got there take care.
@@dmaienlewis9181 So far I've had a great run with my Pro-Mag magazines. If you go to the Taurus website they actually sell Pro Mag Magazines but you will probably find them cheaper at your local sporting goods store or Mag Warehouse and so on. Good luck out there & let us know if they worked out for you.
The earlier versions of the 32 rnd promag pt111 magazines had weaker springs that didn't work well in the g2c, people were contacting promag with this complaint and in return they would send you a free spring doubling up the springs would fix the problem. Since then the company fixed the problem & you no longer have a weak spring that causes failure to feed.
I bought a pt 111 g2 years ago and it jammed shooting every type of ammo, after i locked tighted that stupid key safety that gun will eat all ammo even cheap ball ammo! Turned out to be my favorite gun
It does seem as some people have issues with the 32rd pro mag in the g2c but it works perfect in mine. I have a mag dump in my videos and I could upload more showing so.
Two reasons that the 32 rd Pro-mag jams with the G2C. 1) Pro-mag has a mfg flaw, in that if you take a straight edge and look closely, there is an outward bow on both sides of the widest part of the mag. A wooden block and light hammer tap, striking firmly, but not too hard, can straighten it. The follower within also has some drag due to burrs. I've sanded down mine and slightly stretched the coiled spring, along with slightly oiling the interior of mag and perimeter of the follower. It helps, but doesn't altogether eliminate failure to feed/ejection problem. 2) If you'll set the oem mag next to the 32 round Pro-mag, on a smooth flat surface, align the exit rails with a round in place, both pointed in the same upward or downward direction, you should notice a slight difference in angle of feed from mag to battery (round chamber). Rounds in the 32 mag have a steeper climb into the chamber than the rounds loaded from the oem mag. In my opinion this last reason must be why the Pro-mag 32 rounder will continue to fail so often. Is there a way to adjust feed angle? Yes, but DO NOT RECOMMEND YOU ATTEMPT IT. Modifying feed angle of your Pro-mag 32 rounder may result in a possible jam that may not be easy or possible to unjam safely by yourself and may cause irreparable damage to your firearm even injury or death to you or an innocent bystander. For this reason I can ONLY RECOMMEND OEM MAGAZINES from Taurus.
Taurus' website sales the 32 round Promag, also never got a single jam in mine out the package and ran 640 rounds, 12 of my friends never have gotten a jam in theirs either and ther eis plenty of videos of others running the mag numerous times in the G2C without a single jam.
Yeooo where you get them gun skins from??? And what brand laser and light you using?? Both of them setups fye asf mane😮💨🔥 I’m definitely getting one now
@@josephpacchetti5997 im just trying to help out ppl that own a g2c or g3c and want extended magazine options and sharing my experience with my exerimentations. Take it how u want
@@guerom1367 nothing wrong with that, I'll help folks out anyway I can, you can purchase magazines from Taurus for these pistols and they come with sleeves ( sorry Bloody wheels) you offer a fine product and if you don't mind, what are Exerimentations? 🇺🇸
Ammunition is most definitely his promblem 9mm gold dot Speer bullets are longer an wat keep given him this problem if he switch garented to have a different out come ✌🏾
I think I have the same set up. My 17 round mag is a Metgar mad one Italy. Is that the one you have? The sleeve I have is perfect, I got it on the Taurus website, it’s the exact same texturing and doesn’t move unless you apply a good amount of force.
I think the recoil spring in the G2C needs to be changed, seems to be too light or heavy of a recoil spring. Cause when you first fired the G2C with the extended magazine it did not even load a round into the chamber after the first trigger pull. Also I bet if you put some +p Ammunition in the G2C the added powder would allow the slide to cycle back. So the recoil spring is either too heavy for the target Ammunition you using or the spring is just defective, highly recommend you look into it. Just my 2cents..
I just read that all Taurus pistols are +p rated it’s probably not recommended to constantly shoot +p ammunition through it, but I saw no we’re say that the G2C can’t handle +p ammo. Can you show me we’re you found that. Thanks
Thanks for the shoutout Flame!
No Problem! I bought 3 from you! Keep up the good work my friend!
Mine works just fine take Thelma sleve off
Which extended magazine works for g2s
Stretch out your spring on bvb the extended
What extended mag work for taurus g2
Watched this video at McDonald’s when my phone didn’t have service close to a year ago. Made me hype to get mine one day just got one finally and I’m back this is some dope nostalgia. And bloody wheels is that dude when it comes to printed gun parts fr
Great video Flame, appreciate the G3 mag test, very helpful brotha keep making videos shen 👌🏽
I use the mec gar p226 18 rounders, they work fine. I'm looking to get some of those G3 mags soon as the price gouging is over. Nice video!
I have a g2c with the promag 32 round and have absolutely no problems it's weird that some work and some dont
Probably an ammo problem, looked like he had different colored ammo in the magazine which could be a problem. Not sure tho
@@Zxch_Grxver If your using a promag mag the first thing you blame is the promag. After you eliminate that than you can start deducing whats causing it lmao but rule of thumb if your running anything made by promag and have a issue blame the promag first youll be right like 80% of the time. Seriously people dont buy promag stuff they are such bad qaulity and break easily spent the extra few bucks and get the official manufacturer ones
@@tonymante8759 pro mag is the only company that makes the 32 for the pt 111
Hey ?
@@Wspazz61gtown yes sir
I use the G3C & I carry it with the TAURUS 15 round magazine with the Bloody Wheels sleeve as well.I also can use the extended magazine with my G2C if I decide to carry it.
Back in 2018 my cousin had a g2c and he ordered the 33rnd promag it would jam on the 25 round thou since then they improved the spring tension
Haven't had any problems with the pro mag 15 round in my G2c or G3c. Works perfect.
I know 12 people who have ran 100's of rounds in the G2C with the Promag 32 round and not a single jam at all right out of the box. Only person I ever seen it jam like that on was a dude that was using some weird ammo. I even ran 640 rounds thru it and not a single jam.
Ya the 15 is great, only had issues with the 30
Everythangs Gucci , man haven't heard that in a min great vid dawg thanks
Looking good. I gotta get the mag sleeve & those double laser with strobe combo. The skins are fire too, gotta see how you did it
That's crazy man, my g2c puts all 32 rounds out easily from the pro mag it never jammed on me before
I have never seen anyone get a jam with that Promag 32 round in the G2C, I still have not even got a jam with mine.
It's probably his clip. Needs to be adjusted.
Mine runs smooth, no hangups and locks slide back, factory unmodified magazines
I bought 3 ProMag 15rd magazines for my G2c and they all work flawlessly. I also bought 2 ProMag 10rd magazines for my M & P Shield & they also work flawlessly. I think that with ProMag it's a hit or miss buy. Nice guns you got there take care.
Do the promag work
@@dmaienlewis9181 So far I've had a great run with my Pro-Mag magazines. If you go to the Taurus website they actually sell Pro Mag Magazines but you will probably find them cheaper at your local sporting goods store or Mag Warehouse and so on. Good luck out there & let us know if they worked out for you.
The earlier versions of the 32 rnd promag pt111 magazines had weaker springs that didn't work well in the g2c, people were contacting promag with this complaint and in return they would send you a free spring doubling up the springs would fix the problem. Since then the company fixed the problem & you no longer have a weak spring that causes failure to feed.
Yup, out of 12 people I seen run the 32 Promag, not a single jam.....even me running 640 rounds did not get a jam with the G2C.
I have pro mags coming in and g3 mags I don’t expect anything after market to work however I’ll still try them out
I bought a pt 111 g2 years ago and it jammed shooting every type of ammo, after i locked tighted that stupid key safety that gun will eat all ammo even cheap ball ammo! Turned out to be my favorite gun
Man you good with it🧤🎩
It does seem as some people have issues with the 32rd pro mag in the g2c but it works perfect in mine. I have a mag dump in my videos and I could upload more showing so.
Two reasons that the 32 rd Pro-mag jams with the G2C.
1) Pro-mag has a mfg flaw,
in that if you take a straight edge and look closely, there is an outward bow on both sides of the widest part of the mag. A wooden block and light hammer tap, striking firmly, but not too hard, can straighten it.
The follower within also has some drag due to burrs. I've sanded down mine and slightly stretched the coiled spring, along with slightly oiling the interior of mag and perimeter of the follower.
It helps, but doesn't altogether eliminate failure to feed/ejection problem.
2) If you'll set the oem mag next to the 32 round Pro-mag, on a smooth flat surface, align the exit rails with a round in place, both pointed in the same upward or downward direction, you should notice a slight difference in angle of feed from mag to battery (round chamber). Rounds in the 32 mag have a steeper climb into the chamber than the rounds loaded from the oem mag.
In my opinion this last reason must be why the Pro-mag 32 rounder will continue to fail so often.
Is there a way to adjust feed angle? Yes, but DO NOT RECOMMEND YOU ATTEMPT IT. Modifying feed angle of your Pro-mag 32 rounder may result in a possible jam that may not be easy or possible to unjam safely by yourself and may cause irreparable damage to your firearm even injury or death to you or an innocent bystander.
For this reason I can
ONLY RECOMMEND OEM MAGAZINES from Taurus.
Taurus' website sales the 32 round Promag, also never got a single jam in mine out the package and ran 640 rounds, 12 of my friends never have gotten a jam in theirs either and ther eis plenty of videos of others running the mag numerous times in the G2C without a single jam.
Thanks for the video 👍🏼
Also you can get sig p226 mags work really well in a pt111. made by meg-car
You think it would fit my g3c
Man slapping that trigger like it owes him money
32 round always jammed in my pt111
Sig P226 mags work in the G2C
18rnds and I've heard no complaints
So does Canik tp9 🥱
so crazy I knew you 4-5 years ago
One thing I know about Pro Mag magazines is that they really suck & they always jam, I would never recomment ProMag to anyone!!!
Yeooo where you get them gun skins from??? And what brand laser and light you using?? Both of them setups fye asf mane😮💨🔥 I’m definitely getting one now
Hey if you want to fix that pro mag 32 round oil up your spring just a little bit. I haven’t had a fail to fire since
Dope video what mag holder can I buy
Pro mag 21rd works great in g2c
You think about letting people know if the g3 mag works in the PT111? Besides that great video
same mag well and magazine clip. no reason they shouldent fit baring it sticking out alot more.
Trust me that 2nd spring is worth it my g2c runs fine the only mag I've used is the 32 ProMag
How do I double spring the 32 round mag?
Try the Sig P226 mags and canik tp9 mags they work good in the G2C.
Will a Glock extended magazine 31 rounds work on it?
@@andrewaviles1077 I don't think so.
Taurus actually sells the G3 mags with sleeves now for 36 bucks
Try and stretch the spring from the 32rd
How you hey the white on black design on the pt111? Looks awesome
Thx bro I'm taking that dam pro mag bac to store
U can always try b4 you do. I see some ppl saying it works for them then some saying it dont work🤷🏽♂️
I have the g2c and also a canik tp9sfx that comes with a 20 round mag that will go in your g2c not sure bout the g3 or the g2s
Does it jam?
@@DA-fs6sh Mine doesn't. Just doesn't lock back when empty. I have a short showing how it looks/fits in the G2C.
Can you drop the link for the laser you got on em ??
You have to put a band of electrical tape around your mags. Your pinky grip on the mag will make it jam.
Great info!
Nice Taurus Guns
Never had a problem with my 32 mag out my g2c I done ran 1000rd out of it
Me too bro this nigga gun raggedy asf
Greg Matthews well I pick up my wife and I G2C’s Thursday! Hope they work well with the 32 round extendo
Shiii mines jammed first shot never used it again
Mine too
Canik tp9 mag works perfect in the g2c but doesn't lock the slide back. Sig p226 mags also run in the g2c but jam
If it doesn't lock after the last round, then it doesn't work perfectly, does it?
The sig p226 does not run in the G2c if it jams now does it?
Seem to me that you don't know what you're talking about!!
@@josephpacchetti5997 im just trying to help out ppl that own a g2c or g3c and want extended magazine options and sharing my experience with my exerimentations. Take it how u want
@@guerom1367 nothing wrong with that, I'll help folks out anyway I can, you can purchase magazines from Taurus for these pistols and they come with sleeves ( sorry Bloody wheels) you offer a fine product and if you don't mind, what are Exerimentations? 🇺🇸
Thanks for the insight!! Do have any vids of how you customized the pistols?
I have a G2c 32rd pro mag and i never has an issue with an jam.
p365 30 round fits in g2c. shot 10 round and all fed
Question... do you need a mag sleeve for g3 mag to fit the g2c? 2and question... confirm that are you using a double stack g2c?
We got the same set up do have a holster for ya guns that fit with ya light.
Nah tryna find one that fit
There is some one on you tube currently making the bonus +2/3 for those mags bro check em out nothing wrong having more rounds lol
Where can I find wraps like that for my g2c?
Does the SigSauer 226 & 24/7 .40 cal mags shoot with no jams with the g2?
I have same 30round jams everytime u have to put electrical tape around it rap it like twice above sleeve it wont jam any more trust me
If anyone is wondering the g3 mag also run perfectly in the pt111
I'll be good with the 20rnd mag
Does your extended mag lock in or do you fire it without it snapped in 100 percent.
Dam I just bought one last weekend
That vest 😍😍😍
That vest looks cheap as hell. Like something an airsoft kid would buy. Go look at real plate carriers if you wanna get googly eyes over gear.
I got a beretta 92f 32 round extendo . Modified it to work with my g2c. Chech out my videos of it working like butter . And it has witness holes
What rounds you using and what grain matters
Where or how did you get your guns painted? I have 2 Taurus G2C’s that I would love to paint them just like yours.
U can buy kit off Amazon
idk some people having trouble with 32rd mag with g2c but mine work perfectly it never jammed
Ammunition is most definitely his promblem 9mm gold dot Speer bullets are longer an wat keep given him this problem if he switch garented to have a different out come ✌🏾
I have a g2c no jams I found out it because of the fmj use hallows or red tips no jams at all
The 30 pro mag doesn't feed very well, seems a little loose fitting too
Big homie all you got to do is put you some electrical tape around the magazine
I’ve had 3 g2c’s and never had trouble with the pm33rd the 17 me gaf is perfect but the 15 pro mag jammed in all of them
.40s or 9s?
Where did you order the g3c 18 rds from?
Did u buy the pro mag 32 rd for the sig sauer p226??? U need to buy the one that was made for the PT111 ...
And if u did buy the pt111 return it to promag n get a newer one the newer ones are made for G2c they just don't advertise it
Where do I get iron sites like that for the g2c? I want to change mine out
Good review 👍🏿
You gotta stretch the spring
g3 mag perfect wit g2c
How’d you get that color on the g2c?
Very helpful video
What hostel and what light do you have
What grain bullet was you using?
P226 mag will fit
Yo I gotta contact with bc I got one 😂 I don't need a pro mag to jam for the g2c
Take the rubber sleeve off the promag and. Put the 17 round sleeve on it my promag dont jam
You Gotta put 28 in the 32 round maG for the G2Ç TAURUS IT WANT JAM
Where can I buy one I live in California (I want to buy it online)
How do you make where the gun isn’t so loud? Need help new at this only 4days in ??
Do the Pt111 have the 4 safety’s on it
Is the g2c a .40 or .9mm? I cant find a extended mag for my .40 g2c anywhere
When you hold the gun you pinky is pushing the clips baccwards nd out of position a little nd the bullets not slidin in the chamber properly
I think I have the same set up. My 17 round mag is a Metgar mad one Italy. Is that the one you have? The sleeve I have is perfect, I got it on the Taurus website, it’s the exact same texturing and doesn’t move unless you apply a good amount of force.
That's so odd the stick mag was marketed for g2c but works with the model before
How about some eye and ear protection when shooting. js
what type flashlight do you have on the g2c?
On the bottom of my g2c it says pt111 by the serial number but the slide says g2c not Millennium
How do you get that skin for the Pt111 ?
Any recommendations for a g2s?
Damn many so do the promag work or not?
The link to get the best 20rd so I can order one
Where can I get that flashlight for my G2c ?
Where can I buy the 32 rd mag for the g2c
Where did you get your skin for your Taurus g2c .? Amazon.?? Or custom
Walmart
Hi,where can I get the sleeve for 17round magazine for g2c
The intro😭
I think the recoil spring in the G2C needs to be changed, seems to be too light or heavy of a recoil spring. Cause when you first fired the G2C with the extended magazine it did not even load a round into the chamber after the first trigger pull. Also I bet if you put some +p Ammunition in the G2C the added powder would allow the slide to cycle back. So the recoil spring is either too heavy for the target Ammunition you using or the spring is just defective, highly recommend you look into it. Just my 2cents..
Then G2C is not + P rated.
I just read that all Taurus pistols are +p rated it’s probably not recommended to constantly shoot +p ammunition through it, but I saw no we’re say that the G2C can’t handle +p ammo. Can you show me we’re you found that. Thanks
@@szabib2144
That's not what Taurus manuals state. They clearly state the opposite. Good luck.