How to Replace Rear Wheel Hub & Bearing 2001-2007 Volvo V70

Sdílet
Vložit
  • čas přidán 20. 09. 2022
  • Buy Now!
    New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHR00215
    This video shows you how to install a rear wheel hub and bearing on your 2001-2007 Volvo V70. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
    This process should be similar on the following vehicles:
    2001 Volvo V70
    2002 Volvo V70
    2003 Volvo V70
    2004 Volvo V70
    2005 Volvo V70
    2006 Volvo V70
    2007 Volvo V70
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/of7/1AXAA00013
    • Pocket Screwdriver
    • 17mm Wrench 1aau.to/obu/1AXAA00010
    • 10mm Socket 1aau.to/oe7/1AXAA00017
    • 13mm Socket 1aau.to/ofQ/1AXAA00015
    • 14mm Socket 1aau.to/ofQ/1AXAA00015
    • 17mm Socket 1aau.to/ofQ/1AXAA00015
    • 19mm Socket 1aau.to/ocp/1AXAA00043
    • Air Compressor
    • Torque Angle Gauge
    • 1/2 Inch Air Impact Gun 1aau.to/oX/1AXAA00252
    • Air Chisel 1aau.to/od/1AXAA00270
    • 3/8 Inch Drive Ratchet 1aau.to/ofQ/1AXAA00015
    • Ratchet 1aau.to/ogw/1AXAA00016
    • Swivel
    • Torque Wrench 1aau.to/odA/1AXAA00044
    • Drill
    • Brake Parts Cleaner
    • Cloth Rags 1aau.to/oas/1AXSS00035
    • Copper Anti-Seize
    • Liquid Thread Locker
    • Silicone Paste
    • 7mm Allen Wrench 1aau.to/ok/1AXAA00007
    • Drain Pan 1aau.to/oah/1AXAA00320
    • Rubber Mallet 1aau.to/oC/1AXAA00413
    • Sledge Hammer 1aau.to/oa9/1AXAA00091
    • Wire Brush 1aau.to/o9/1AXAA00079
    Subscribe: / @trq
    Check out our playlist:
    Volvo V70 2001-2007 2nd Generation: • Volvo V70 2001-2007 2n...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Auta a dopravní prostředky

Komentáře • 7

  • @TRQ
    @TRQ  Před rokem

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @FlippedSociety
    @FlippedSociety Před rokem +1

    Your relaxed voice tone helps me calm myself before tackling these jobs. Thank you for leading us!

  • @Schwedenstahl245
    @Schwedenstahl245 Před 7 měsíci

    Some Volvo's owner's manuals state that the wheel lug bolt torque is 140 nM (or 103 ft-lbs).
    Just an FYI

  • @PaulSveda
    @PaulSveda Před 9 měsíci

    Thanks for these videos. Great job, much appreciated.

  • @gregoryfambro7592
    @gregoryfambro7592 Před rokem

    I Have A 2007 Taurus Rear Driver Side Tire Leaning Inwards. Any Suggestions About This Situation? Wud B Much Appreciated. Thanks.

  • @slickstretch6391
    @slickstretch6391 Před 8 měsíci

    At 6:20 you whack it with a hammer and it comes loose. Mine won't. It is attached solid. Any ideas? I've been using PB Blaster and whacking it and prying on it for over an hour and it just won't budge. I'm thinking I'll have to go get a loaner slide hammer to pull it off...

  • @kazparzyxzpenualt8111
    @kazparzyxzpenualt8111 Před 9 měsíci

    Do the splines need grease?