How to Replace Wheel Bearing & Hub Assembly 2001-2007 Volvo V70
Vložit
- čas přidán 12. 10. 2022
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHF00220
This video shows you how to install a new wheel hub and bearing on your 2001-2007 Volvo V70. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2001 Volvo V70
2002 Volvo V70
2003 Volvo V70
2004 Volvo V70
2005 Volvo V70
2006 Volvo V70
2007 Volvo V70
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaV2/1AXAA00013
• Pry Bar 1aau.to/oFR/1AXAA00020
• 10mm Wrench 1aau.to/oIg/1AXAA00010
• 13mm Socket 1aau.to/oaUz/1AXAA00015
• 15mm Socket 1aau.to/oaUz/1AXAA00015
• 19mm Socket 1aau.to/oWS/1AXAA00043
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/oW/1AXAA00278
• Brake Caliper Hanger 1aau.to/ofx/1AXAA00084
• Ratchet 1aau.to/oa9h/1AXAA00016
• Swivel
• Torque Wrench 1aau.to/oafy/1AXAA00044
• Brake Fluid
• Brake Parts Cleaner
• Copper Anti-Seize
• 7mm Allen Wrench 1aau.to/ob2/1AXAA00007
• Wire Brush 1aau.to/ooE/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
you are an excellent repair and maintenance.. thank you so much make me the best guideline for me I use done Volvo 850
Great tutorial. I should have just removed the entire hub/knuckle assembly when doing my ball joints and struts. Would have been 10x easier to replace the wheel bearings at the same time.
Perfect video , a job for me and my C70 next week 👍
Great video - thank You !
OMD. too much disassembly. remove the wheel. Remove the axle screw. Remove the ball joint nut. Pull the control arm down and pull the axle out. Pop the hub out (slide hammer) and install new. Easy.
Is it the same procedure for a 2006 XC70?
Awesome Video. Cheers
I’m an A&P and this is One of the best Car how-to videos I’ve seen. Great job! Thanks
Najlepsze wideo o wymianie piasty w V70
respect ✊
Easier removal than the late models of volvo.
You did put some greasy fingerprints on the brake pads, otherwise a nice job.
NEVER use antisieze between hub and rotor!!!
It relies on the friction to not turn/twist and sheer of the wheelstuds.
the pickup as you call it for the abs sensor ( proximity sensor ) it is not the bearing face it is the reluctor ring on the drive shaft , do not give wrong information
Never reuse stretchbolts…
9:05 - Magic. Suddenly its loose ;-) I am sure it was a fight.... What out for the cut outs. This can be a challenge.
I did the same job but you didn't remove drop link is pushing that shock absorber alot,,,, shock can't go back in the same position ,,,alot of pressure of that drop link ,,wrong informative video,,,wrong
Your missing the the wheel bearing dust seal. SHAME ON YOU! THE BEARING WILL GET RUSTY FROM THE SEAL BEING MISSING. BEARING MIGHT LAST A FEW YEARS.
That is one trashy car undercarriage. . My 2005 s80 with 200k miles looks pristine new under carriage. Thats the advantage of arizona lifestyle...NO RUST NO GRIME ....looks almost factory new/.