iPhone 8 Teardown! - Screen and Battery Replacement Video
Vložit
- čas přidán 21. 09. 2017
- iPhone 8 Replacement parts: goo.gl/vWVhyX
Tearing down the iPhone 8 is oddly familiar... With the same basic construction as the iPhone 7, its a relief to not have to use a heat gun to repair components inside the iPhone. The screen of the new Apple iPhone 8 will come away from the device with a screw driver, a suction cup, and a thin metal pry tool.
The battery inside the Iphone 8 has a bit different construction. It is held in place by four different pull tabs. One on each corner. I like this because if you mess up on one pull tab, its not as big of a deal.
iPhone 8 Durability Test video: • iPhone 8 Durability Te...
Awesome iPhone Tool Kit: amzn.to/2xu8VBL
LARGER tool kit: amzn.to/2DURcr7
Green Pry tool: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
The camera I used to film this video: amzn.to/2p7GtkX
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: amzn.to/2joH00G
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
Snapchat: bit.ly/1UAb2Fq
GooglePlus: bit.ly/1YyKice
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.
"as long as you kept them organized and haven't sneezed them off the table" i love how you describe everything in your tear down videos and its encouraged me to do what i love repair phones as a hobby. thanks for making these videos
03:46
After 2 years, this teardown is still relevent.
I just did this on an iPhone 8 Plus and the repair went perfectly!
Not an easy to repair phone!!! great work man!
3:13
Terms to learn:just like little legos,folds like a book,magical pull tabs,fragile as paper...
“And haven’t sneezed them off the table yet...”
"So I found it easier to slip in just the tip of my tool"
Great job, Jerry have you ever played back a tear down video to remember the screws places??😂
I never take time to comment tutorial videos, but this one is properly the one I should. Thank you for your time, your explanations and the video. Thanks to it I was able to replace the tricky iphone 8 lcd screen. Thank you again, amazing work.
wow EXCELLENT quality, narration, straight to the point, good comic relief. Just very RARE nowadays with CZcams videos. Thank you!
Well, I usually watch these videos out of curiosity of how everything’s built inside. Also, when my phones get old enough (since I wouldn’t have anything to lose), I will be referring to these videos as well. And man, this is really entertaining.
Pretty sure a headphone jack could fit there
Quite a few of your videos have helped me during the past few years. Using this one now to fix a neighbors phone. You’re the best!!
I just watched this after your 6 battery replacement and I didn’t realize how far apart they were
I was waiting for This Video Since This Phone was launched.Thanks for providing It.
"and everything works, I'm kind of surprised myself" i laughed so hard at that, wow jerry your such a funny man, love you videos
This tutorial is just excellent. I did it thanks to you help. One thing I was unaware of at disassembly is that the screws on the same bracket can have different lengths, so they must go in the exact same hole position they came out of. I managed somehow ;) also in my case the replacement battery came with magic strips of the exact shape, but I recognized too late that there is a good and a bad direction to put them. If it starts rattling tomorrow I’ll know why :) Thank you very much for your effort, I appreciate!
He made this look so easy, after an hour and a half I finally got it. And did the repair successful.