This video was made in 2012.... But if you are still using this account I just wanted to say thank you! Did not realize some of the bulbs happened to be halogen when I bought my place. You have saved me a lot of frustration!
Thank you! I was getting so frustrated trying to figure out how to remove this bulb. I had never dealt with this type of light bulb before. Thank you, again!!
Thank you for emphasizing that you had to push hard to get the bulb to fit or I would have been scared I would break the bulb. I watched another video and they guy just said "push down and put it in" but didn't expain it would be hard and didn't even showing himself fitting the bulb in. Your video was so helpful!
The lamp to repllace fucking broke on me. I was fighting for my life, scared as shit holding the strong ass springs so I could get the fucking lamp in. Good tutorial. Traumatising experience.
Very clear instruction. I had this replaced by an electrician about six months ago and I watched him while he installed it. Had I not had your instruction...I would have had to call him again with a hefty price tag attached. GREAT INSTRUCTION!! I had the bulb replaced in 5 minutes, tops!!! CZcams IS AMAZING!!!!!!!!!
Great tips! Maybe also explain why you handle halogen bulb with a cloth (to prevent grease from fingers from getting on bulb and burning from high temperature).
Great instructions! We have tried to uninstall the burned light bulb with no luck and were almost ready to call the professional. Your video has saved us. Thank you so so very much!
Thank you so much for this tutorial! I have one of these lightbulbs in my ceiling fan - never had to change it since I've been here (multiple years), the white plastic ends seemed to have corroded and fell apart on removal but I got there all thanks to you!
I was ready to break it in two and then figure out how to install the new one but then it crossed my mind... let's use the internet. Thanks for sharing this!
My light is a ceiling light and so hard for me to replace the bulb!!! I will replace the light to led soon! Don’t want to spend extra cost on calling electrician again. Thanks for your video.
Thanks for the vid! My lamp is even more difficult. I also had to push the contact at the other end down with a fine screwdriver to get the old bulb out.
Hi Ingo, by what percentage does fitment of a 60W linear halogen bulb to a school-age child's ceiling fan light (ie. it is off when they are at school) reduce the manufacturer's stated bulb life of 2000 hours?
This video was made in 2012.... But if you are still using this account I just wanted to say thank you! Did not realize some of the bulbs happened to be halogen when I bought my place. You have saved me a lot of frustration!
Thank you! I was getting so frustrated trying to figure out how to remove this bulb. I had never dealt with this type of light bulb before. Thank you, again!!
I watch this after breaking the old bulb already. But at least thanks to this video, I didn't break a new one lol. Thank you!
Thank you, I've never in 40 odd years seen this bulb ... great help!!!
Thank you for emphasizing that you had to push hard to get the bulb to fit or I would have been scared I would break the bulb. I watched another video and they guy just said "push down and put it in" but didn't expain it would be hard and didn't even showing himself fitting the bulb in. Your video was so helpful!
The lamp to repllace fucking broke on me. I was fighting for my life, scared as shit holding the strong ass springs so I could get the fucking lamp in. Good tutorial. Traumatising experience.
Had to through a few videos before I found yours. I was struggling trying to change the stupid thing. Bless you!!!!
Very clear instruction. I had this replaced by an electrician about six months ago and I watched him while he installed it. Had I not had your instruction...I would have had to call him again with a hefty price tag attached. GREAT INSTRUCTION!! I had the bulb replaced in 5 minutes, tops!!! CZcams IS AMAZING!!!!!!!!!
Great tips! Maybe also explain why you handle halogen bulb with a cloth (to prevent grease from fingers from getting on bulb and burning from high temperature).
Great instructions! We have tried to uninstall the burned light bulb with no luck and were almost ready to call the professional. Your video has saved us. Thank you so so very much!
Thank you! This is exactly what I was looking for. I can now change the bulb!!
My pleasure. I am glad i could help. ;o)
Same as me thx
Old video, but needed to watch it today to get to know how to remove this type of lamp 😊
Thank you so much for this tutorial! I have one of these lightbulbs in my ceiling fan - never had to change it since I've been here (multiple years), the white plastic ends seemed to have corroded and fell apart on removal but I got there all thanks to you!
Thanks I believe your video was the only one I found.
Thank you so much I've had a dark bathroom for a month now and was ready to just install a new fixture
And how do you fix a fixture when the spring is completely stuck and doesn’t want to move back and forth anymore?
I was ready to break it in two and then figure out how to install the new one but then it crossed my mind... let's use the internet. Thanks for sharing this!
I want to thank you too! I just wanted to QUICKLY learn how to change out a "J" bulb, and you helped.
Thank you for this video! Wouldn't have been able to replace it without your help. 👍
Thank you. I couldn't work out how to change my bulb.
My light is a ceiling light and so hard for me to replace the bulb!!! I will replace the light to led soon! Don’t want to spend extra cost on calling electrician again. Thanks for your video.
Fantastic! You need to make more tutorials about crazy lightbulbs ❤
Thank you, your the only one who shows this
Thanks for the vid! My lamp is even more difficult. I also had to push the contact at the other end down with a fine screwdriver to get the old bulb out.
Omg so sweet and simple! Had this issue forever since buying my home now I have light! Thank you
thank you I now know how to change it i haven't been able to see in upstairs for weeks😂
You saved the day! Great little video...perfect explanation and demonstration.
thank you for showing how to put the R7S in the fixture
Thanks! Short and useful video
Thanks man! I applied so much pressure it almost broke the glass. This fixed it! :)
Thank you so much! I know this might seem like basic information, but I keep forgetting!
You sir helped me learn how to be a better man! Thank you :)
You saved my life
Exactly the help I needed. Thank you very much!
This was very helpful, thanks!
Thank you! That ******** bulb was giving me gray hairs.
Thank you! Very helpful.
Thanks for this video! very helpful!
thought thats all i had to do first YT search came up with this Thanks Lol
Thank you!! Great content! Now I can do it myself 🌈🍀👍
i went through internet to find instructions for r7s. Maybe explain also how to get the lamp out without applying too much force?
Thanks alot, it was not obvious to me !
Hi Ingo, by what percentage does fitment of a 60W linear halogen bulb to a school-age child's ceiling fan light (ie. it is off when they are at school) reduce the manufacturer's stated bulb life of 2000 hours?
Thanks Ingo !
Thank you sir 👍
Thanks!!
Geschafft! Danke! ☺
Very useful thanks
Danhe Herr Schaer, hat mir sehr geholfen! :)
The worst bulb in the world! Thanks excellent tutorial 😁
Bless you!!! thanks!!! спасибо! :)
This saved me, thx!
Thank you!!
Thank you so much! 🙏
thanks patner!!
Thank you
thanks
Sehr gut!
Thank you!
Push it real good!
Great thanks!
Thank you.
Good stuff
thanks for showing the mechanism. i was able to change it. it's ironic how i can't screw in a bulb
i felt silly doing YT seachings to change a bulb too
haha
Ive heard you should insert the right side first to avoid getting shocked
How do you replace bulb that's not spring loaded?
in halogen j'aime ❤❤ 100%
My bulb is the same, I need to replace it but it seems FUSED it is so hard to take out! I have to wait for someone to help me :(
I can't replace my bulb. I can't pushit it to any side because there's no any spring inside the socket...
You rule
Ich meinte Danke...
how do you remove...?
lol
I cannot get a replacement buld in for a strange reason is there son
łatwo :V
Ta u mnie tesz
nu klorrrrrrrr.so mach mo das richtsch.gruß von lippi.
Good morning sir? Excuse me I'm a girl:p
Mach bitte keine Videos!
Who invents this shit?!
very helpful! thank you so much!
Thank you!
Thank you.
I got the bulb in but it's not working. (I tried 2 new bulbs.)