that is crazy just to change a back strap with the spring tension, at least give it a grove or something so it cant rotate while your putting the pin in. I would not take that off again if you paid me to
Has anyone had the experience of finding paint (golden) left over from a bullet when shooting at the range when cleaning a gun at the very entrance to the barrel. I tried to remove it in several ways but nothing works. I would be very grateful if someone could share their experience and how to solve it.
I just picked a new one up today and mine had it from test firing I guess. Or it might actually be gold paint like a dot on there for quality control or assembly purposes I'm in the automotive line of work and I use paint markers white yellow red to place dots and marks on thing for my quality and assembly purposes. And it's also a little on feed ramps ramps is
@@v.german11b Seems like it's been out long enough now that SOMEBODY should have mags... But I can't find any. However, the 45 ACP isn't listed on CZ-USA's website yet so who knows.
@@caseylasalleI too bought a CZ P10 F 45 auto to find out additional magazines are impossible to find. Ridiculous. IF I had known I wouldn't have bought it 😡
While we have CZ's attention. How about coming out with an optics cut slide version for your hammer fired defensive pistols such as the P07, P-01, PCR. They are all great firearms for the last decade, but they are just good in their current configuration. You need to understand that Good is the enemy of Better. BTW the P10-M is beyond being lame. You essentially admitted that S&W, Springfield Armory (HS), Sig, Mossberg, and also Taurus are able to produce a micro nine that exceeds the capacity of the P10-M. I can't possibly understand how the CZ engineers came out with a "less than" pistol unless management pushed them into it. As a raving CZ owner I expect more from you, as we all should. Hire new engineers or fire your current product managers and show us that you are worthy of our continued business. You are on the fast track to being yesterday's news!
Only CZ pistol I ever had problems with? CZ P-10c, had to return it the same day I bought it. There's no way this firearm should have past quality control and when test fired! Won't be buying anymore striker fired CZ pistols.
Let me quess the slide stop spring came off.sent mine into cz a month ago finally gotbit back. They said they deburred slide stop and adjusted the spring
I haven't tried mine yet I hope they fixed it I begged them to run at least 50rds in it but something tells me I will be sending it back. They didn't even replace the spring just adjusted it. Pisses me off they wouldn't send me a spring but they said when I send it in they would replace it. They didn't even bother cleaning it either sent it back dirty
Would like to have you wear a white or light colored shirt for more contrast to the handgun. Great video tho, learned some things I didn’t know.
Thank you for the feedback - we will take note of that for the next set of videos!
Best video so far, I watched 5 other videos and could never the slide off. Got it off on the 1st try after watching your video
How to clean a pistol:
- take a perfectly clean pistol
- confirm that its clean and no cleaning is required
- don't do any cleaning
- you are done
Good simple video. I held off buying one for years waiting for an optics cut hammer fired.
Appreciated! 👏🏼👏🏼👏🏼👏🏼 I own two P10 models, the F and the C suppressor-ready.
I just picked one up today always wanted one have you had any firing pin problems??I'm sorry mine is the po9
Just picked up a cz po9 thanks great video
it will be good to show how to clean a cz ts orange when you see the price it cost and also how many rounds to do it
I need a video of disassembly and cleaning the New 2023 TS2 orange bull barrel
I didn''t line up those two line but I can still pull out the slide stop, its that a problem?
Cz 100 lugar....plz tell us about its safety lock or pin etc...plz explain
Thanks I was struggling with my p10c until I watch this video
How often would you recommend i take the extractor and firing pin out to clean the carbon build-up?
Thanks much!
that is crazy just to change a back strap with the spring tension, at least give it a grove or something so it cant rotate while your putting the pin in. I would not take that off again if you paid me to
I am afraid to change mine after all the trouble I have had out of my p10c
Is ok to dry fire the po9 hammer fired a few times after cleaning without snapcaps? I have heard stories on dry fire hammer guns
I would not. Also don't slam your slide close if there's no round in chamber.
Has anyone had the experience of finding paint (golden) left over from a bullet when shooting at the range when cleaning a gun at the very entrance to the barrel. I tried to remove it in several ways but nothing works. I would be very grateful if someone could share their experience and how to solve it.
Any solvent meant to deal with copper fouling
I just picked a new one up today and mine had it from test firing I guess. Or it might actually be gold paint like a dot on there for quality control or assembly purposes I'm in the automotive line of work and I use paint markers white yellow red to place dots and marks on thing for my quality and assembly purposes. And it's also a little on feed ramps ramps is
Please wear white clothing when you do your instructional videos. It makes it a lot easier to view. Thanks.
Where can I get some P-10 F 45ACP mags?
Me too! Where?
@@v.german11b Seems like it's been out long enough now that SOMEBODY should have mags... But I can't find any. However, the 45 ACP isn't listed on CZ-USA's website yet so who knows.
@@caseylasalleI too bought a CZ P10 F 45 auto to find out additional magazines are impossible to find. Ridiculous. IF I had known I wouldn't have bought it 😡
👍👍👍👍👍
While we have CZ's attention. How about coming out with an optics cut slide version for your hammer fired defensive pistols such as the P07, P-01, PCR. They are all great firearms for the last decade, but they are just good in their current configuration. You need to understand that Good is the enemy of Better. BTW the P10-M is beyond being lame. You essentially admitted that S&W, Springfield Armory (HS), Sig, Mossberg, and also Taurus are able to produce a micro nine that exceeds the capacity of the P10-M. I can't possibly understand how the CZ engineers came out with a "less than" pistol unless management pushed them into it. As a raving CZ owner I expect more from you, as we all should. Hire new engineers or fire your current product managers and show us that you are worthy of our continued business. You are on the fast track to being yesterday's news!
Or you could pay 200 dollars to get the slide milled and have a more stable platform for your optic.
@@SinisterRaven If you like your slide to be painted, then that’s ok. I prefer the original factory finish.
Only CZ pistol I ever had problems with? CZ P-10c, had to return it the same day I bought it. There's no way this firearm should have past quality control and when test fired! Won't be buying anymore striker fired CZ pistols.
I had trouble with mine the first day at the range 34 rounds. Slide stop spring came off won't stay on the stupid little notch
Let me quess the slide stop spring came off.sent mine into cz a month ago finally gotbit back. They said they deburred slide stop and adjusted the spring
I haven't tried mine yet I hope they fixed it I begged them to run at least 50rds in it but something tells me I will be sending it back. They didn't even replace the spring just adjusted it. Pisses me off they wouldn't send me a spring but they said when I send it in they would replace it. They didn't even bother cleaning it either sent it back dirty
Why is my damn comments keep getting deleted?? I bet you had trouble with the slide stop spring came off
Ha!
You don't even have to clean Glocks!
Yahs czp10c slide stop spring design sucks. Stupid design