A teardown for Bafang Ultra M620 /G510 motor
Vložit
- čas přidán 11. 08. 2022
- Bafang Ultra M620 /G510 motor take apart: controller, primary gear, secondary gear and thirdly gear, torque sensor, motor rotor and stator. You can get all these Bafang M620 spare parts on www.greenbikekit.com/ ;You will get to know how to replace the gears, torque sensors or M620 rotors.
Tools needed:
1. Allen key;
2. Cross screw driver;
3. Plier (7 inch or 8 inch) with straight head for removing the torque sensor;
4. Rubber hammer;
Related parts(www.greenbikekit.com/bafang-8... ):
1. Bafang M620 controller www.greenbikekit.com/bafang-8...
2. Bafang M620 primary gear: www.greenbikekit.com/bafang-8...
3. Bafang M620 /G510 middle steel gear: www.greenbikekit.com/bafang-u...
4. Bafang M620 /G510 third steel gear: www.greenbikekit.com/ultra-st...
5. Bafang M620 EB-Bus cable: www.greenbikekit.com/bafang-u...
6. Bafang M620 chainwheel: www.greenbikekit.com/bafang-u...
7. Bafang M620 crank arm: www.greenbikekit.com/bafang-u...
8. Bafang M620 controller gasket: www.greenbikekit.com/bafang-u...
9. Bafang M620 motor core gasket: www.greenbikekit.com/bafang-m...
10. Bafang M620 torque sensor: www.greenbikekit.com/bafang-8...
11. Bafang M620 pawl clutch: www.greenbikekit.com/bafang-8...
12. Bafang M620 Rotor: www.greenbikekit.com/bafang-8...
13. Bafang M620 calibration display: www.greenbikekit.com/bafang-8...
14. Bafang M620 kit: www.greenbikekit.com/bafang-8...
8. Bafang M620 stator: www.greenbikekit.com/bafang-u...
9. Bafang M620 full suspension frame: www.greenbikekit.com/bafang-u... - Auta a dopravní prostředky
You make it luck easy, i would need new motor if I took apart.
Super Anleitung 👍
Can you tell me if there are replacement controllers available for the M620? I’m struggling to find anything available and my bike shop says the motors are disposable.. please let me know… new sub
Hello, yes, we have replacement M620 controllers available. You can order from here www.greenbikekit.com/bafang-ultra-motor-controller-52v.html
Wish I could work that fast.
What type of grease does Bafang use in the motor?
most people recommend mobil 28, and you can consdier it
@@Greenbikekit At how many kms before having to regrease motor?
@@laplantemichel709 The Bafang M620 motor's recommended maintenance interval for regreasing the motor is around every 1000-1500 kilometers, depending on usage and conditions. However, it's always a good idea to inspect the motor regularly and re-grease if necessary to ensure optimal performance and longevity.
Great video...do you ship to the UK? Want a M620 motor with 52V battery.
Yes, we do. You can order on our website www.greenbikekit.com/electric-motor-engine/ultra-g510-mid-motor-parts.html
You did not take the rotor and stator out
We have another video for how to take the rotor out
My motor makes 3 clicks per rotation of the crank arms, Do you know what could be causing this?
please check the pawl clutch inside the primary gear
@@Greenbikekit It only does it when pedaling forward.
@@LysergicCasserole95 probably the pedal freewheel(also called pawl clutch) is defective
@@Greenbikekitmy motor has resistance on pedals even when chain is off. I can hear motor engaged when pedaling with no power. Do I need the same part?
@@JL-up8nh Hello, please check the pawl clutch(the pawl clutch is attached to the motor axle/torque sensor)