Nice to work on trucks with so much ground clearance. Borla has always been top shelf! If you go with another brand stay with 304 stainless over 404. 404 might last longer over aluminumized steel, but salt will surface rust it disappointedly bad. Borla is worth the extra money for sure!
Beautiful truck and the sound is just outstanding! I love it! I wish I could subscribe, but since I had too many subscribers, CZcams just wouldn't let me.
The "rear muffler" isn't a muffler, it's a resonator. That's why no difference in volume/loudness. Resonator just changes tone and helps eliminate drone. How's the Borla sound with MDS kicked in? Also, those aren't bead locks. They are bead lock capable, if you can find the rings that Ram says exists (probably right behind the unicorn barn as far as I can tell), but as delivered the rings are just rim protection/beauty rings. I've got a 75th anniversary PW and will probably stick with 35" but those 37" look nice.
Resonator, not a muffler. They actually help your engine produce more power and gas mileage by using sound waves to help evacuate the combustion chamber and move the exhaust down through the pipes and out of the muffler. This action relies heavily on the resonator. By tuning the pulses of exhaust gas to work together, it creates stronger waves of exhaust that vacuum the gas out more quickly.
Sounds sick however did the noise level increase inside the cab and by how much? You stated you couldn't tell on the drone and heard the tires more over so that's actually decent confirmation right there. You'll know if you had drone. Borla markets this system to not having drone so wonder if accurate.
How’s it sound with 9 months of use, how does it sound In the can, I had a borla on my mustang and it was awesome, I’m ordering this same exhaust in a week or 2…
Is that a fairly new exhaust from Borla? I looked a while back at exhausts for mine and I don’t remember them as an option. I definitely like it though. Is there any highway drone at cruising speeds?
Great truck and sound. At the beginning, indicate those are Pro Comp 37" tires - Is that on stock truck, no lift or front level? Lots of other videos indicate 37's rub, but you look to have plenty of room. Thanks for any advice.
No lift or level at time of video. Shocks have since been upgraded and now has front level. Slight rub on inside before that, but only full crank or while hitting bumps and turning. Nothing serious, though.
WHY DONT THEY MAKE THE BORLA ATAK FOR 2500’s. It is the best sounding and that’s all they offer is side exit single s type. Gayest exhaust borla makes.. what a joke
Sounds great! I bet the neighbors love it 😂
Nice to work on trucks with so much ground clearance. Borla has always been top shelf! If you go with another brand stay with 304 stainless over 404. 404 might last longer over aluminumized steel, but salt will surface rust it disappointedly bad. Borla is worth the extra money for sure!
Beautiful truck and the sound is just outstanding! I love it! I wish I could subscribe, but since I had too many subscribers, CZcams just wouldn't let me.
Dang that sounds good 👍🏻👍🏻
Sounds great. Only been waiting 2mo now for the borla I ordered to get here. Hopefully it's worth it.
Great video! Was there any cutting involved in this process?
Sounds good. Does it drone at Hiway speed cruising?
The "rear muffler" isn't a muffler, it's a resonator. That's why no difference in volume/loudness. Resonator just changes tone and helps eliminate drone. How's the Borla sound with MDS kicked in? Also, those aren't bead locks. They are bead lock capable, if you can find the rings that Ram says exists (probably right behind the unicorn barn as far as I can tell), but as delivered the rings are just rim protection/beauty rings. I've got a 75th anniversary PW and will probably stick with 35" but those 37" look nice.
Curious about the MDS with an aftermarket exhaust.
Same. I’ve been trying for 2 years to find the bead lock rings for my 75th. No luck.
@@benmartin2697it’s annoying either way. I always turn it off
@benmartin2697 only goofs get annoyed by mds. Sounds fine with magnaflow
Whats mds and how do you disable it?
Resonator, not a muffler. They actually help your engine produce more power and gas mileage by using sound waves to help evacuate the combustion chamber and move the exhaust down through the pipes and out of the muffler. This action relies heavily on the resonator. By tuning the pulses of exhaust gas to work together, it creates stronger waves of exhaust that vacuum the gas out more quickly.
Sounds sick however did the noise level increase inside the cab and by how much? You stated you couldn't tell on the drone and heard the tires more over so that's actually decent confirmation right there. You'll know if you had drone. Borla markets this system to not having drone so wonder if accurate.
When I'm working on my exhaust once I take the whole thing off I take it for a quick rip just for that. Then out the next one on
Noice!
How’s it sound with 9 months of use, how does it sound In the can, I had a borla on my mustang and it was awesome, I’m ordering this same exhaust in a week or 2…
Previous comment you said you upgraded the shocks and did a front end level. May i ask what equipment you used?
Is that a fairly new exhaust from Borla? I looked a while back at exhausts for mine and I don’t remember them as an option. I definitely like it though. Is there any highway drone at cruising speeds?
It is hard to tell because of the tire buzz
Howdy sir, what year of truck is it? I’ve been wanting one for my 2021 PW and I was hoping for the Part#. Would love some feed back, thank you
This one is a 2022. I would imagine they are the same. I believe it was ordered from Borla direct.
Great truck and sound. At the beginning, indicate those are Pro Comp 37" tires - Is that on stock truck, no lift or front level? Lots of other videos indicate 37's rub, but you look to have plenty of room. Thanks for any advice.
No lift or level at time of video. Shocks have since been upgraded and now has front level. Slight rub on inside before that, but only full crank or while hitting bumps and turning. Nothing serious, though.
All I can hear is the chirping motor. Mine does the same and it makes buying an exhaust seem useless.
Where did you buy it from? Sounds amazing!
I believe he got it at 4wheelparts.com
was that a straight bolt on kit? didn't see any welds. thanks!
Bolt on 👍
@@PatrickMichael2002 can't seem to find it anywhere. not listed for on their site for the power wagon
How does this sound inside the cab dose it get droned out at any speed
Not much of a difference from stock until you get on it.
How does the hemi compare to the gm2500 HD, plus maintenance, parts ect ,
Gas is cheaper to maintain than diesel. Type of engine will make more difference than brand.
@@robertgoodrich8953Nothing you said came anywhere close to actually answering the guy’s question 🤦♂️
What do you get for mpg with that exhaust?
No differences seen
did you fit a full 37in spare under the bed?
No, that's a factory wheel.
Did u have to have a lift to fit 37 inch tires
No lift. Stock suspension.
Not a rear muffler. It's called a resonator.
Omg that's the resonator leave that on remove the muffler
They are no longer marketed or labeled as "Dodge".
Does it have a lift
Stock. No lift.
Needs dual exhaust
No, then your suspension can't work.
No it doesn’t.
Why?
If you have to ask, you won’t understand.
Traded mine for an eco boost
WHY DONT THEY MAKE THE BORLA ATAK FOR 2500’s. It is the best sounding and that’s all they offer is side exit single s type. Gayest exhaust borla makes.. what a joke