Kawasaki Z900 - Stator Cover Replacement
Vložit
- čas přidán 31. 12. 2020
- This Z900 had a bad day at Lime Creek Road. Some holes in the stator cover was the result and some oil on the road we cleaned up!
Dr. Speed Lemon shows you how to get your Kawasaki Z900 back on the road if this happens to you in this Stator Cover Replacement episode.
Also installing a MadRacing Case saver on the stator. The rest of the guards in another video soon!
www.smallrig.com?afmc=2aq - Auta a dopravní prostředky
love hearing him talk and work, so relaxing 👍
Great video for beginners. 😇
Thank you. This was a great help as I’m removing the cover off of my 900rs.
Excellent! That's great to hear
Thank you!
The amount of RTV everywhere is giving me anxiety.
Dr. Speed lemon is messy at times
you give me Bob Ross vibes. but for motorcycles
I need a video on clutch case removal for 2017 Kawasaki z900. Do you have one? Thanks
with what did you clean the cover, did you use a solvent or something...? Great video! txs
What tool did you use to loosen the bolts that hold the stator in the stator cover? I recently got into an accident on my ninja 400 and I also cracked my stator cover.
im wondering if the kable is pluged somewhere or is it running direkt to battery ? :)
Not sure, we didn't need to follow it back that far. Let us know if that's where it connects.
Omg 😱...my friend, What kind of crash or accident did you have ?... Greetings from Colombia.
It was just a little lowside slide. The rider was ok. Tienes una linda país.
anyone know what the little gear was the stator. its held on by the small cylinder piece the connects to the stator cover. it came loose when i pulled my cover off and i was wondering if it had to be in a certain position like the timing gear.
Did you ever figure that out? Currently in same boat🤣
@@jacobaragon2727 I did but it was so long ago I can’t remember. I think I ended up saying fuck it and yammed it back in there but I honestly have no clue
@@calebwitt6594 alright, I appreciate it! I may have to end up doing that🤣
@@jacobaragon2727 good luck man lemme know how it goes
(^_-)-☆大事に乗ってくれて、ありがとうございます。
You didn’t think to clean your hands ? Also, that gasket looks shot now my guy . SMH 🤦🏾
Thanks for watching!
I stripped the screws holding the stator into the cover the red loctite would not budge any suggestions?
Dremel a slot in the bolt so that you can use a flat head screw driver to unscrew it
Your torque setting is off with such long Extension
We don't agree with you on this particular subject.
czcams.com/video/tRR96ILGORU/video.html
Beauty is in the eye of the beholder, but damn that wood look is terrible. RTV is not a good choice for use as petroleum based products (oil) will resolve it. More than likely it was used to hold the gasket during assembly. Man are you a messy mechanic. Loved the video though.
Hi, care to elaborate? What would you use instead of rtv sealant? I’m planning on doing this project on my z900rs. Any info would be helpful. Thanks.
that shit is UGLY as fuck