Your statement was true and hilarious, "Some guys will say, oh that was designed to be in there, or they would not have put it in. well guess what.... I designed it to be taken out. This is my build, not the factory's. I'm just using their stuff"
Harvey I take chanelle lock pliers and start at the first groove in the nose of the jaws and cut it a bit deeper and narrow it to the tip so you can get it under a lip Easyer. I do both upper and lower this was because I use them to clean aluminium radiators with plastic tanks for scrap. I think this might help to open a muffler like that. 😊👍👍👍
Sorry to be off topic but does anybody know a trick to log back into an instagram account..? I was dumb forgot the login password. I would appreciate any tricks you can give me.
@Ayaan Landyn Thanks so much for your reply. I got to the site on google and I'm trying it out atm. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
The exhaust manifold gaskets for a 3406E cat have a tube that extends into the port like that muffler does, they claim that it increases volicity and helps get that heat out of the head, a lot of the early ones failed broke off and would takeout the turbo when they broke they were made onto the gaskets
I am really enjoying your videos and plain spoken words of wisdom. I have a 6100 stock and will sending out to Gary Buxton in Wisconsin for a port and muffler mod. Keep up the good work!
I peeled my ps6400 muffler open like opening up a solenoid on a car.gutted everything inside added 2 more ports.i took each tube in about 5/8" recrimped it.huge difference with no limiters on the carb adjustment.
You should be proud.. it’s beautiful my friend. Also the only reason I come here is because you use and do things that the common person uses and show how to get it done 🌲🇺🇸🌲
Back when I was contracting, pipe welding mainly and CHANNEL LOCK brand is the way to go, I like the really small ones they were perfect for that line of work, my baby locks I calledem well as the rest of my guys, i was on a 3/4 nut..with my BABY LOCKS, way too much rod for my small ones, well I broke 3rd gear out of them, used them right on...tookem back to lowers, channel lock brand, blue handles...and they replaced mine with a brand new one right off the shelf, if yuh dont have any or just randoms(like harve said name brand stuff is way to go) get the 3 pack channel lock brand, wont slip gears and if you bust one u new one free...and you have one for any size..cant beat it with a stick..
That video told me what I will do to that muffler is good, but to see it happen is the best. Now I need to be patient for the next video.... thanks for sharing Uncle Harv, be safe
As the saying goes you get what you pay for, I don’t mind buying cheaper scanners if I am going to grind them down for a job or cut and weld I think somewhere along the line we have all done it. I think it is Carlton that has a replacement 6 rivet tip for the tsumura bars. The new echo 7310 is still a adjustable carby. The saw sounds great, used to use the big dollars in the eighties and have been a fan since. Cheers and stay safe.
Thts a mighty fine saw u have there mr Harvey, tht jewel sure is snappy now. It wants to jump up off the table, very nice job my friend. It never gets old watching a master saw builder build a master peace !! 💯🙏 mr Harvey this is from my ❤, thank u for everything u have helped me with !! Ps. I sure would love to sport one of them really cool ironhorse stickers on this 372 build tht u helped me with 🤷♂️?🤷♂️? Stay safe my friend..
Heck of a nice job on the dolmar or Mikita which ever sounds like it has a healthy crack to it haven’t played with Straddle type saws myself great video iron horse I’ll try to give you call sometime see we’re your at with my pioneer p62 till then have a awesome day always enjoy your videos just not a big on comments I’m better in person 🙃
Harvey's right in the Northeast we cut timber right to the ground, that's were the money is in that log in the but of the tree. Harvey is the man would have loved to gone in the woods with him learned something priceless.
Another great video iron horse always great information love the channel and I finally got a 272xp, they are fairly plentyful in my area, lots of older husky, stihl, pioneer mac's poulans here and gonna start goin around to the local saw shops and seeing if I can get my hands and some of the stuff they throw out, ha ha I'd still love to own an ironhosre custom saw, thank you for continuing to pass on your knowledge to us peace and love to and yours buddy later
Great sounding and running saw. Muffler mod seemed to make a big difference. Can you tell me the percentage of the muffler outlet that you’re shooing for compared to the exhaust port
Really looking forward to uncle harve wielding that beautiful lil saw in some wood, I like to watch people that really know what they're doing, always learning, thank you uncle harv dont get stressed over the channel, it's all good buddy, of course we all love the videos and communing with you but dont feel obligated or pressured into CZcams, keep the important things closer, everything is going to work out brother, i swear it is, and that kook ain't makin it in that big house, dont stress brother
Cant wait to see it cutting hardwood. Harvey, how do i know , if my Baroil is enough or what happens, when its adjusted to low when running 24“ Bar Fullhouse in Hardwood cutting full length . What are the Symptoms? Chain stretching? Chain stuck? How do i know , i‘m running enough and not to much Baroil. Thanks for this Video. Is that a Propane Torch?
Would you build a key to the bush exhaust for my 372 xp I live in Sudbury Ontario Canada I would love one of your exhaust for my 372 xp please and thank you?
You should be proud of yourself that saw came alive..I cut hard maple with 365 special it's ported she 'll pull 24 in bar plus a lot lighter than big saws..
I’d like to see what you could do with a echo cs 590 timber wolf even tho it’s not 70cc. One of my favorite saws, plus echo killed the price point at 400 dollars. I can’t afford husky or stihl right now lol
Great video I'm really surprised that muffler wasn't stuffed up more than it was.....actually sounds better now I probably would've opened it up just a bit more though
Ironhorse. I'm curious if a guy could increase crankcase volume in a smaller saw to gain top end? Pipe it to accommodate the flow? Is it possible to anyway get more case volume for gains? Just curious.
I had a question about oil holes on a bar i got a new bar for my husky 257 and oregon decided to make a small hole thats at an angle. They say the small hole creates more velocity which keeps it from getting clogged. What are your thoughts about that?
What can you do to a 268xp and make err rip I’m new I’m interested and I’m game to whatever you wanna do!!! Have noticed that you are like the Bob Ross to chainsaws haha.... let’s put a happy little hole right here and just let it work it!!!!
Ya those knock off tools don’t last unless you only need it for one time and throw it away but if your going use it all the time by the good stuff yip out only cry quality ones
those "vise grips" are just that trash... not even worth picking up... there are more cheapos around these days and some are actually pretty decent... definitely not the ones you got there though!
Your statement was true and hilarious, "Some guys will say, oh that was designed to be in there, or they would not have put it in. well guess what.... I designed it to be taken out. This is my build, not the factory's. I'm just using their stuff"
Harvey I take chanelle lock pliers and start at the first groove in the nose of the jaws and cut it a bit deeper and narrow it to the tip so you can get it under a lip Easyer.
I do both upper and lower this was because I use them to clean aluminium radiators with plastic tanks for scrap. I think this might help to open a muffler like that. 😊👍👍👍
Nice rock chucker you have on that other bench. Best press ever. I love your videos please keep it coming.
We love you Ironhorse, Bless you for sharing your wisdom with us!!!
We turn of the TV and Turn On Ironhorse's Power Saw University!!!
Sorry to be off topic but does anybody know a trick to log back into an instagram account..?
I was dumb forgot the login password. I would appreciate any tricks you can give me.
@Tripp Bruce Instablaster ;)
@Ayaan Landyn Thanks so much for your reply. I got to the site on google and I'm trying it out atm.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Ayaan Landyn it did the trick and I actually got access to my account again. I'm so happy:D
Thanks so much, you really help me out !
@Tripp Bruce Happy to help xD
tsumara makes a small mount k095 bar that fits the ps6100. i run my ps6100 with a 24" k095 husky bar.
Looking forward to seeing this one running! It was awesome seeing how you do the mufflers, I will be trying that myself very soon.
me to
"I designed it to be removed" Love it!!!
The exhaust manifold gaskets for a 3406E cat have a tube that extends into the port like that muffler does, they claim that it increases volicity and helps get that heat out of the head, a lot of the early ones failed broke off and would takeout the turbo when they broke they were made onto the gaskets
I am really enjoying your videos and plain spoken words of wisdom. I have a 6100 stock and will sending out to Gary Buxton in Wisconsin for a port and muffler mod. Keep up the good work!
I peeled my ps6400 muffler open like opening up a solenoid on a car.gutted everything inside added 2 more ports.i took each tube in about 5/8" recrimped it.huge difference with no limiters on the carb adjustment.
My phone wont let me post any pics.what yr model is that makita
You are SO correct on the 'Brand Name' tools. The imposters are just plain junk. There are expensive exceptions, but try to stay made in America.
You should be proud.. it’s beautiful my friend. Also the only reason I come here is because you use and do things that the common person uses and show how to get it done 🌲🇺🇸🌲
yup right tools for the right job, cant wait for the Makita test run, cheers from NZ
p.s. makita stopped production of all dolmar gas saws feb. 2022. they are only making electric saws now.
Back when I was contracting, pipe welding mainly and CHANNEL LOCK brand is the way to go, I like the really small ones they were perfect for that line of work, my baby locks I calledem well as the rest of my guys, i was on a 3/4 nut..with my BABY LOCKS, way too much rod for my small ones, well I broke 3rd gear out of them, used them right on...tookem back to lowers, channel lock brand, blue handles...and they replaced mine with a brand new one right off the shelf, if yuh dont have any or just randoms(like harve said name brand stuff is way to go) get the 3 pack channel lock brand, wont slip gears and if you bust one u new one free...and you have one for any size..cant beat it with a stick..
That video told me what I will do to that muffler is good, but to see it happen is the best. Now I need to be patient for the next video.... thanks for sharing Uncle Harv, be safe
Congrats Harvey on nailing the first Strato saw build to get an Ironhorse sticker ! Thanks it's been my pleasure to be here
I really appreciate taking your time to TEACH this in such detail thank u
There is nobody better than the ironhorse! Believe it everyone. LOVE the video. Hope your well my friend.
Hey Eric!
Looks awesome Mr Harvey! You know great things are happening when a man in his 60's is gitty like a kid in a candy store!👍👍💪💪😎😁🇺🇸🇺🇸
As the saying goes you get what you pay for, I don’t mind buying cheaper scanners if I am going to grind them down for a job or cut and weld I think somewhere along the line we have all done it. I think it is Carlton that has a replacement 6 rivet tip for the tsumura bars. The new echo 7310 is still a adjustable carby. The saw sounds great, used to use the big dollars in the eighties and have been a fan since. Cheers and stay safe.
We still have the old saw. In AZ Navajo reservation. Running strong 💪.
Thts a mighty fine saw u have there mr Harvey, tht jewel sure is snappy now. It wants to jump up off the table, very nice job my friend. It never gets old watching a master saw builder build a master peace !! 💯🙏 mr Harvey this is from my ❤, thank u for everything u have helped me with !!
Ps. I sure would love to sport one of them really cool ironhorse stickers on this 372 build tht u helped me with 🤷♂️?🤷♂️? Stay safe my friend..
You got it kieth!
THAT MUFFLER LOOKS REAL GOOD
When I worked in the woods I use a stihl ms251 with an 18in bar with full house chain cutting oak, maple, birch, and beach
Heck of a nice job on the dolmar or Mikita which ever sounds like it has a healthy crack to it haven’t played with Straddle type saws myself great video iron horse I’ll try to give you call sometime see we’re your at with my pioneer p62 till then have a awesome day always enjoy your videos just not a big on comments I’m better in person 🙃
Looks like a great saw all the way round!! Cant wait to see it in the wood!!
Okay! Now I want to see it at work in some wood. Great video Harvey.
Great video..i heave 357xp with muffler... great saw. And. Makita 7300. new... thanks from. Transilvania 🤝🤝
Harvey's right in the Northeast we cut timber right to the ground, that's were the money is in that log in the but of the tree. Harvey is the man would have loved to gone in the woods with him learned something priceless.
I wish I knew 1/2 of what you’ve forgot! Thinking of porting my 510 Dolmar, I’m sure gonna try to use some of your tips and tricks!
That saw looks and sounds good, i can't wait to see how it performs!
I really enjoyed this build.
Looks too easy with your experience. Great work. Happy Friday-was glad to spend some of it here.
Another great video iron horse always great information love the channel and I finally got a 272xp, they are fairly plentyful in my area, lots of older husky, stihl, pioneer mac's poulans here and gonna start goin around to the local saw shops and seeing if I can get my hands and some of the stuff they throw out, ha ha I'd still love to own an ironhosre custom saw, thank you for continuing to pass on your knowledge to us peace and love to and yours buddy later
The teacher is giving good information 👍
Great sounding and running saw. Muffler mod seemed to make a big difference. Can you tell me the percentage of the muffler outlet that you’re shooing for compared to the exhaust port
I like this stuff. You malleated with out a hammer back into place like a Medic.
Really looking forward to uncle harve wielding that beautiful lil saw in some wood, I like to watch people that really know what they're doing, always learning, thank you uncle harv dont get stressed over the channel, it's all good buddy, of course we all love the videos and communing with you but dont feel obligated or pressured into CZcams, keep the important things closer, everything is going to work out brother, i swear it is, and that kook ain't makin it in that big house, dont stress brother
I love these saw videos
Beautiful work Harv!
are you ever going to do a ammo reloading video Harve ?????
Cant talk about that greatness on the tube...
that saw sounds very good now
have a 5600 i pulled the baffle out of it wakes these saws up alot
Eagle Grip vise grips by Malco…USA made, better than original vice grips imo.
NICE LOOKIN SAW SHE SOUNDS AMAZING GREAT JOB HARVEY HAVE A SAFE WEEKEND BUDDY
Luv ya Harvey. Great knowledge and great attitude. Keep the vids coming.
Thank you!!!
The saw law according to Harvey, amen.I love your channel
I was always on the understanding smaller saws wouldn't turn full skip in wood well? I've never tried it. I'd love to see it in the cut. Interesting
Cant wait to see it cutting hardwood.
Harvey, how do i know , if my Baroil is enough or what happens, when its adjusted to low when running 24“ Bar Fullhouse in Hardwood cutting full length .
What are the Symptoms? Chain stretching? Chain stuck?
How do i know , i‘m running enough and not to much Baroil.
Thanks for this Video. Is that a Propane Torch?
Sounds great can't wait to see it cutting some wood!
I like it .
Would you build a key to the bush exhaust for my 372 xp I live in Sudbury Ontario Canada I would love one of your exhaust for my 372 xp please and thank you?
have a DS6421 wont start after it heats up thanks Seamus
Great build harv, im gonna do that muffler mod to my dolmar 6400
You should be proud of yourself that saw came alive..I cut hard maple with 365 special it's ported she 'll pull 24 in bar plus a lot lighter than big saws..
Nice build Ironhorse
You skipped over the gasket install. Did you size the Id of the gasket to fit the opening of the muffler
Sweet video! That is a really nice saw, I have two of them! Happy Friday!
I have that same saw and it’s brand new. Please let me know if you would be interested in porting it for me.
Hey man what’s the update on this machine? How did your logger buddy like it? Can’t wait to see. Thanks for the how to, love the channel.
Great video series! Where do you find Makita chainsaws? They are impossible to find around North Alabama or Southern Tennessee.
I’d like to see what you could do with a echo cs 590 timber wolf even tho it’s not 70cc. One of my favorite saws, plus echo killed the price point at 400 dollars. I can’t afford husky or stihl right now lol
Good way to get red of Blue Thunder blues
Harv you can make two opposing rollers to seam your muffler. Like they put lids on tin cans.Barb hay Harv have you seen my can opener?
Name brand tools are worth the money Harv I agree. Copy cats are the same .👍✊
Ironhorse, That chainsaw looks great. I wanna hear it cutting!!! Ken
Love your channel big man keep it up I'm lrarningy
Try using a crescent wrench for ur bend back man may help
Great video I'm really surprised that muffler wasn't stuffed up more than it was.....actually sounds better now I probably would've opened it up just a bit more though
You the man
I miss working on saws.
Ironhorse. I'm curious if a guy could increase crankcase volume in a smaller saw to gain top end? Pipe it to accommodate the flow? Is it possible to anyway get more case volume for gains? Just curious.
Nice build!
Free powersaws for everyone!
where can I get mine hehehe :) lol
How bout building a 925 super XL.
HI can you put a 16inch .325 .063 on a sthil 025 16inchsaw
I had a question about oil holes on a bar i got a new bar for my husky 257 and oregon decided to make a small hole thats at an angle. They say the small hole creates more velocity which keeps it from getting clogged. What are your thoughts about that?
Hello @ironhorse did you ever finish that dolkita with the big block?
Have you got to play with the new 500i I have one and I’ll tell you what that saw ported would be a animal
would love to buy a 6100 built by ironhorse!
will this method work on a 395 muffler?
I have a whole bunch of my Dolmar Muffler’s in Germany.
Hi harv ...seeing you work that muffler was amazing, that material look tuff as f××k...was it stainless?? Excellent end results....
Hey nick!
It’s stainless steel! Ya, I know stuff about junk!
What can you do to a 268xp and make err rip I’m new I’m interested and I’m game to whatever you wanna do!!! Have noticed that you are like the Bob Ross to chainsaws haha.... let’s put a happy little hole right here and just let it work it!!!!
Love ya iron horse….!
When you pressure test the case on the junk yard dog let me know the number of psi the crankshaft seals can take.
👌👍
Could someone please send me the website link for BeeRayFarms chainsaw parts supplier?
Bless you.
Email. Beerayfarms@gmail.com
Nice one buddy :)
Hey Harvey..🙏❤️👍🇺🇸☮️
I worry about flames near my saws
You had me cringing watching you tighten those tiny muffler screws. Easy does it big fella. Nice video though.
Ya those knock off tools don’t last unless you only need it for one time and throw it away but if your going use it all the time by the good stuff yip out only cry quality ones
Do you do porting for others and if so how do I get ahold of you Bucking Billy Ray's channel sent me to you
Hey harv was wondering how do I contact you
Ironhorsechainsaw@gmail.com
Keep America free
those "vise grips" are just that trash... not even worth picking up... there are more cheapos around these days and some are actually pretty decent... definitely not the ones you got there though!