2 Easy Ways to Make Extreme Miter Cuts
Vložit
- čas přidán 23. 05. 2023
- How do you cut miters greater than 45 degrees? Most miter saws max out somewhere between 45 and 60 degrees. If you want to make a cut greater than that, you're going to have to make an auxiliary fence that changes the angle that the back of your workpiece references from. This is super easy, and today I show you two ways to easily achieve the seemingly impossible task of cutting extreme angles.
The BEST Double-Sided Tape - lddy.no/m666
The Sliding T-Bevel I Use Most Often - amzn.to/3BRQ9Vr
GET YOUR OWN DEWALT MITER SAW DUST COLLECTION BOOT HERE:
inspirewoodcraft.com/products...
DW716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
DWS716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
OR VISIT US ON ETSY
www.etsy.com/shop/InspireWood...
PATREON: / inspirewoodcraft
EMAIL: inspirewoodcraft@gmail.com
WEBSITE: www.inspirewoodcraft.com
INSTAGRAM: / inspirewoodcraft
Looking for DOUBLE SIDED PAPER TAPE, DISCOUNTED HIGH-QUALITY PEC COMBINATION SQUARES and overall great savings ALL THE TIME? Shop where I shop! lddy.no/go67
YOU CAN SAVE 10% ON STARBOND CA GLUES AND ACCELERATOR!
Use the code “INSPIRE10” at checkout! www.starbond.com
SAVE 10% ON THE BEST CIRCLE CUTTING JIGS HERE!
jaspertools.com/discount/INSPIRE
SAVE 10% ON OLIGHT FLASHLIGHTS, TACTICAL LIGHTS AND HEADLAMPS!
Use the code "INSPIRE10" at checkout! www.olightstore.com/?streamer...
BANGGOOD WOODWORKING TOOLS: www.banggood.com/marketing-Wo...
MY HAND TOOLS, POWER TOOLS, CAMERA GEAR AND MORE:
www.amazon.com/shop/inspirewo...
SOME OTHER VIDEOS YOU MIGHT BE INTERESTED IN:
HOW TO MAKE THIN STRIPS ON THE TABLE SAW - • Throw Out Your Thin-Ri...
CHECK OUT MY TAPER SLED VIDEO HERE - • Unlimited Possibilitie...
If you appreciate this content and would like to help give back FREE OF CHARGE, simply give this video a “thumbs up”, leave a positive comment, subscribe to Inspire Woodcraft’s CZcams channel and SHARE THIS VIDEO with someone who you think would enjoy it. Some of the links that we’ve provided above are affiliate links. That means that when you make purchases through those links, we earn a small commission of the sale at no additional cost to you. While we do use affiliate links where we can, we only endorse products or services that we believe in. That commission is a big part of our income, which also goes back into making more videos, so by using the links you help support what we do and for that we are very grateful. - Jak na to + styl
Great trick - people outside of woodworking don't realize how much geometry and trigonometry we actually use!
always straight to the point!
Very helpful, thank you. Good presentation too, no drama, just sound advice. Subscribed.
I’m always impressed with your tutorials thanks
I love a good practical guide to a useful technique, like this one.
Very well explained. Your videos make me regret not learning more geometry in my younger years. Very helpful tips.
Dude,,, the way you explained things makes it so very easy to understand I would have said and cut boards all day long and never came up with a 65 degree cut but after watching you do it, it's so very simple thank you for explaining to us lesser experienced wood butchers how to do it
It's a shame that hitting the like button more than once is not possible. You know what; you are the best woodworking channel from your continent. I'm serious. Your every video is a gem. You are a school to me. Thank you.
Love your videos!! Your tips and tricks are simple and easy to follow. Please keep them coming.
Jamie, as usual you've presented a fantastic video explanation/tutorial and this one was really helpful. Thank you!
Gotta love options.... you're a video-making machine right now, Jodee. Keep bangin 'em out! Great content!
Freaking brilliant! just freaking brilliant! I am so so so so (yep 4 sos) glad that you decided to do this content creator thing full-time. You help so many folks in very real ways! THANK YOU!
Really useful stuff. Keep it coming, please!
You just made me feel smart. I needed to make a 60 degree cut on my saw that maxed out at 45. I came up with that idea all by myself. That geometry law about the angles of a triangle adding up to 180 is what helped me. Happy now that my geometry teacher was a real hard ass.
I am amazed at the way you come up with woodworking tip`s. It`s is a tremendous help to us that are novices and i `am sure woodworkers that are well knowledged in woodworking.
This is fantastic. As well as the video before this. Thank you!
Thank you for this video! I'm doing staircase chair rail and frame molding and wasted about 16ft. of material trying to figure out how to cut a 64-degree angle on my miter saw. You saved the day....my project came out perfect after watching your video!
I'm in exactly the same position! So much time and molding wasted 🤦🏽♀️ I wish I had seen this video first!
Love these "super tips" videos~! Please keep 'em coming~! Thanks much~!
Your tips are always easy to follow and so pertinent to the subject. Love your channel and tell everyone about it.
@Ralf Kramden Thank you very much!
A real clear and concise explanation. We do have jobs where we have to cut a lot of extreme angles. We use the second method that you showed because of the frequency that we need to make these cuts. The 45 degree false fence is usually held down by the mitre saw clamp although I think we will try “your” tape method. That false fence is about 1” thick which allows us to mount a toggle clamp to it. So, we introduce the piece of trim or cladding to be cut to the saw and clamp it down with that toggle clamp; cut and release. The only advantage of our method is speed if you are making repetitive extreme angle cuts. If it’s just one or two and we didn’t have that false fence to hand, then tape would be the answer.
Nice solution. I will keep it in mind in the future. Last time I had to make a narrow angle cut I ended up using the tapering jig on my table saw.
You're a talented woodworker and craftsman, but I have to say that you're a better teacher... and I intend that as a compliment. At this point, I never click, 'Watch later' on your content because your whole channel is nothing but solid, great stuff for those situations we all have in the shop where we scratch our heads and wonder how we're gonna finesse our way out of an impossible situation.
I needed this a week ago.
Well done. Thank you for sharing.🙂🙂
Good advice! I prefer the second way
I like your videos
You explain calmy and clear
Greets from Netherlands
Great explanation!
Great video I'll remember this one!
Well, this is cool. I will definitely mentally note this!
Awesome tip!
Your double side tape trick for acute miter cuts with jig saved my sanity! Thanks!
Another way is to just clamp it down.
Nice video. Gotta remember the double sided tape trick as ive been doing the painters tape/CA glue thing -- which works -- but this is quicker.
I learn more things from you.
Neat sir, thank you!
Brilliant!
Sure did help thanks.
Awesome tick/tip!
I’ve more or less freehanded these types of cuts my whole career with mixed results lol. (40 years omg) Thanks for making it easy.
Nice one!
That tape is the key! My dad always holds it by hand and it's an accident waiting to happen. Thanks for showing a safer alternative.
@Jeremiah Bullfrog That's how I've seen literally every other person do it and it looks terrifying. I'm more afraid of my miter saw than I am of the table saw or router though so, there's that. Ha!
Spinning-ninja-star-of-death on a hinge is definitely scarier than spinning-ninja-star in a fixed position. Router definitely has more metal between the spinning bit and the user. Yeah, probably good to be wary of the miter saw.
Ok. What is the correct double sided tape to use?
@Roberto Perfecto This is the tape that I use: lddy.no/m666 I also made a quick, helpful video on the most efficient way to apply it, if you're interested: czcams.com/video/dVoRiGBJarM/video.html
@@InspireWoodcraft Your technique changed my double-sided-tape game forever, so simple and so genius ... I blame public education but thank you for adding some common sense to our lives.
Yet again. Home run!!
Love your short form, super educational videos, that aren't shorts! Although, sometimes you wear shorts.... I've confused myself!
@Jeff Slag I despise Shorts. The CZcams kind. I like the clothing shorts. 😂
Excellent.
My man!
Thank you !!!!!!!!!!!
Thank you for this Tip . 👍, I push the Abo Button .
Very cool.
Smart!!
Nice!
thanks
That's a really great trick indeed! Thanks a bunch, dude! 😃
Stay safe there with your family! 🖖😊
Great stuff. Is there safe and effective way of cutting an acute angle on long pieces of timber... over ten feet long?
Im trying to make flag display cases. The angles are 22.5 degrees but need to also be identical in length. Also to note my pieces are cut standing up not laying flat as i need the depth once put together. Any good ideas on this. Im having a bit of a problem as they all need to exact in length also..
I love the video! Too bad that they don't ship to my country (the Netherlands). Any alternatives that are available overseas?
perfect !great tip
What brand/type, (exactly), of two-sided-tape, do you find works best? I thought of doing this long ago, but did not think the adhesive on any of the double-sided tape that I had experience with, would be sufficient for work-holding. Also, this tablet will not show the "description" that you mentioned... Hee hee, or maybe I just do not have this tablet "quite enough", figured out yet!
Thanx!
Newbie question: the manual for my saw says the bevel angle must be set at 0 degrees when using an auxiliary fence which I assume includes 45 degree jigs. So the question is can you safely make compound cuts using this method? I did a mock up / dry run in my case and the blade seems to have a clear path straight through. If the workpiece is clamped or screwed into the jig and the jig is screwed or clamped to the fence, it seems like it should be ok.
How would you make this repeatable? For example, if you wanted 65 degrees on both ends, but you wanted that piece copied 4 times and all are exactly the same length?
Hello Im new here and thanks for sharing. Could you tell me about the rubber shoot for dust collection on your Dewalt?
@Clark Sellars I just released a video covering this, if you're interested! czcams.com/video/7HID6YleVsg/video.html
wich saw are you using?
How about if I needed a 65 degree bevel cut on the end of a 5/4x12 board?
Any chance you can do a detailed video on your chopsaw dust shroud? Really captures a lot more dust compared to the standard shrouds on the desalt saws. Is it homemade or an aftermarket kit? Cheers
@randomratz I just released a video covering this, if you're interested! czcams.com/video/7HID6YleVsg/video.html
ROSSEAU 0DUST HOODS
Hello, I hit the link to your double-sided tape and I got "this site cannot be reached. What is the name of the tape?
What is the dust extraction you have on your miter saw? Is it something you made or is it available for purchase? Please explain in a video.
@John Hoyle I've been getting that question a lot lately. I will try to make a video about it, but essentially it's just a piece of silicone mat that I cut and cupped behind the blade and into the factory dust port. Currently it's just held on with magnets. It works surprisingly well because of how wide it spreads out. The only downside is that there is a chance an offcut can get flung in there without a way to escape the blade. That's only happened once, but once was enough.
@@InspireWoodcraft Thank you! I look forward to that video.
@John Hoyle I just released a video covering this, if you're interested! czcams.com/video/7HID6YleVsg/video.html
Great explanation!!!
Will that work if you want an extreme angle on the edge as in 22.5 degree when making a flag box?
Yes I've made one just like a flag display but for a bandana that my best friend that passed always wore
@@chancesmalley6708sorry about your friend. I did think think you wrote banana though. 😂
Thanks man asthma sucks took him at 26...I don't think a banana would fit In a triangle very well tho
Ok but what if I need a cut longer than can be done on a miter saw?
For me the 2nd way is better because it allows me to make rapacious cuts
You and Elon Must are, obviously, both aliens sent down here to better humankind! Of my 127 sub'd channels, I look forward to your videos more than any other.
Elon is a turd. He's worried about making mars and his wallet better. Stop the praise.
but you are not showing how you placed the piece of wood you cut to get the acute angle . you are showing the finished MDF cut piece!!!
Why not just rotate the board by a full 90° and subtract subtract the steep angle, set the saw to that number of degrees? No secondary fence needed. Double stick tape still highly recommended though. 90 - 65 = 25…
do not get it.!