I guess Im asking randomly but does someone know of a method to log back into an instagram account? I was dumb lost my login password. I would appreciate any tricks you can give me
@@rybniksealsproduction7198 For me is very fun make paper models. I would like to show you my model when I finish it, but I don't know how, email maybe?
@@rybniksealsproduction7198 Mines a ISSN 14284618 Kartonowe ABC 10'99 GPM NR CAT 1.59 IJN Shokaku japanese aircraft carrier paper card model 1:200 huge 127cm I've looked all over..
For someone just getting into this sort of hobby what sort of printer would you suggest getting? Any guidelines and the cheapest but most effective option?
Well, I use public printer, because it results in very quality print and If you wouln´t use it very often it is also probably the cheapiest way. I tried normal printer, but even though the print looked very nicely, it chiped off easily. Actually you can see this in my other videos. So if you are not planning to use it often, I recommend rather use the public one.
@@american_rider6596 About the printer. It might work and 60 bucks is not bad. But make sure, that the quality of print is good, because either way you could just throw money out your window. Even though the printed pictures may look beautiful, it is also important to check if it won´t chip off easily. This would make it useless.
@@rybniksealsproduction7198 btw...what paper is suitable for making paper model ?? I made a paper model with just plain paper ... which is soft, and tears easily Lmaoo
@@rybniksealsproduction7198 btw...what paper is suitable for making paper model ?? I made a paper model with just plain paper ... which is soft, and tears easily Lmaoo
@@ezrawilliam4849 Well, it depends. You should use less thick paper for small parts that require some modeling and more thick paper for big parts. With models that you would buy already printed, for example from company GPM, you might recive sheets of different thickness according to the parts. But doing this with models that you can download from internet would be quite a lot of work. And for these I use 160 gpm paper, because it is very common. I hope this helped :D
Hmmm, If you will print it on A4 format, it should work perfectly. Only issue I can see is, that you used diferent format. For example american Letter...
@@rybniksealsproduction7198 I was using American letter, that was the reason. I printed it A4 format on American letter and it currently is working very well(had to change print settings a bit as well). Making great progress! Thanks!
I built this but I didn't build it 1 350th scale I use the smaller format which gave me a smaller carrier but was better because that way I wasted a bit less ink and I like small models
www.papermodel.jp The web site is in japanese though, but it is not that hard to find the model. if you will use the link in discription, you will appear at the actual site with Akagi model. Than just scroll down and there are all the 30 pages. (just follow the way in the beginning of this video).
I didn´t really get that. If this is a pun on "what the fuck", nice. If you are looking for the link to download this model, you will find that in the description.
Thanks guys. I put a lot of effort into this video, so I am glad it is getting more and more popular.
I guess Im asking randomly but does someone know of a method to log back into an instagram account?
I was dumb lost my login password. I would appreciate any tricks you can give me
@Stanley Riley Instablaster :)
How did you download it?, i can't download the papercraft?
@@ACKUSNADI9356 Well, you need to open the PDF files and download each page individually.
Excellent work. I had a model of the Akagi once, but I left it in the same room as a model of the Enterprise, and the next day it was gone.
I see XD
Musim povedat, ze aj ked model vyzera ako potomok divokej noci medzi Miniboxom a EGG masinkami, je vysledok fajny. Pekna praca
Nice job! Thanks for the video... Plastic models are so expensive! Glad I found paper...
Yeah, price and my bad skills with painting are the reasons why I make mostly paper models :D
@@rybniksealsproduction7198 but u will need a lot of ink
@@arnelpabustan2531 For printing my models I usually go to public printer, which keeps the price relatively low.
get a 3d printer
Thanks, because of you i made another akagi like you. You help me!!.
Nice job!! I made this model too and you definitely did better.great work!
XD don't underestimate yourself
You spelt capacity wrong but who cares this ship is !!AMAZING!!
xd Yeah, there is a lot wrong with my english in this video.
@@rybniksealsproduction7198 it's OK I understand. Nice ship it looks cool where did you get it?
@@-thousand.yard.stare- You can download it for free using the link in the description.
I am working in exactly the same model 0:
Nice job 👍
Nice, I hope you will have fun as I did. I would like to see your result, when you finish it, if you would not mind.
@@rybniksealsproduction7198 For me is very fun make paper models. I would like to show you my model when I finish it, but I don't know how, email maybe?
@@luisangelm6803 Yeah, that is what I wanted to suggest. Just send me pictures of your model through our channel´s email adress.
@@rybniksealsproduction7198 ok. In the video l am in 26:00 when I finish it I'll send it to you
@@luisangelm6803 Great, I am looking foward to your model.
I loved watching it !The glue what type is?
What was that price you put on the video, was it the price you spent on material?
Well, I used printer for public access because the quality is much better so this is what the actual print cost me.
You use regular glue ?
I use white liquid glue for paper and wood.
ive got this...or similar, no instructions :(
Well, if you have the same one, you can check the instructions in the description of this video and if it is not the case, at least you´ll know :D
@@rybniksealsproduction7198
Mines a ISSN 14284618
Kartonowe ABC 10'99
GPM NR CAT 1.59
IJN Shokaku japanese aircraft carrier paper card model 1:200 huge 127cm
I've looked all over..
@@brigoose7945 That is a beautiful model. I found some pictures of the instructions here, hope it will help:
www.super-hobby.cz/products/Shokaku.html
@@rybniksealsproduction7198 thats the 1 thanks :)
For someone just getting into this sort of hobby what sort of printer would you suggest getting? Any guidelines and the cheapest but most effective option?
Well, I use public printer, because it results in very quality print and If you wouln´t use it very often it is also probably the cheapiest way. I tried normal printer, but even though the print looked very nicely, it chiped off easily. Actually you can see this in my other videos. So if you are not planning to use it often, I recommend rather use the public one.
@@rybniksealsproduction7198 you have a public grade printer or you go to like the library and print models?
I am thinking about getting HP OfficeJet 3830 for model Printing in my room since it takes a4 paper and is around 60$ (I'm american)
@@american_rider6596 I go to the nearest stationary, to be exact.
@@american_rider6596 About the printer. It might work and 60 bucks is not bad. But make sure, that the quality of print is good, because either way you could just throw money out your window. Even though the printed pictures may look beautiful, it is also important to check if it won´t chip off easily. This would make it useless.
great video i think you meant June, 4th, by July, 1942, AKAGI was at the bottom of the Pacific sunk.
Thanks man. You are right with the date, I haven´t noticed that :D
Nice job dude 😁
Thanks man.
Btw... what paper are you using?
160 gpm A4 sheets.
@@rybniksealsproduction7198 btw...what paper is suitable for making paper model ??
I made a paper model with just plain paper ... which is soft, and tears easily
Lmaoo
@@rybniksealsproduction7198 btw...what paper is suitable for making paper model ??
I made a paper model with just plain paper ... which is soft, and tears easily
Lmaoo
@@ezrawilliam4849 Well, it depends. You should use less thick paper for small parts that require some modeling and more thick paper for big parts. With models that you would buy already printed, for example from company GPM, you might recive sheets of different thickness according to the parts. But doing this with models that you can download from internet would be quite a lot of work. And for these I use 160 gpm paper, because it is very common. I hope this helped :D
@@rybniksealsproduction7198 hey,thx buddy
that's very helpful : D
Btw sorry for my English bad
Nice model
Can u plzzzz gave me the Wed side name where u print out the copy
It is in the description.
I tried to make this but when making the hull, I found that parts of it weren’t the right size. I think my printer paper isn’t the right type???
Hmmm, If you will print it on A4 format, it should work perfectly. Only issue I can see is, that you used diferent format. For example american Letter...
@@rybniksealsproduction7198 I was using American letter, that was the reason. I printed it A4 format on American letter and it currently is working very well(had to change print settings a bit as well). Making great progress! Thanks!
I built this but I didn't build it 1 350th scale I use the smaller format which gave me a smaller carrier but was better because that way I wasted a bit less ink and I like small models
What kind of glue did you use
Just white liquid glue for paper and wood.
Rybník SEALs Production Can I use shoes glue
@@anghuyphamnguyen3096 I mean, you can try. I have never tried this one so I don´t know.
What type of paper is that? Is it hard? And not so easily to be folded,cut, or break?
Yop, it is A4 format paper sheet 0,5 mm thick - 170 gpm.
@@rybniksealsproduction7198 oh cool thanks!
Where do you get the kit
It is free to download. You can find the link in description.
@@rybniksealsproduction7198 thanks dude
wow so nice! ! do you know other website that gives free printable paper model?
The biggest portal would be papercraftsquare.com but these days I found most of their links not working.
Maybe you try IJN Akagi Angraf?
Very good
Wow thats so hard buddy let me try
xd
What is that video 22:10
Compilation of actual WWII footage and scenes from movies. Name of the CZcams channel, that originally uploaded this is in the right corner.
Arigato por el link 👍👍👍👍😁😁😁😎😎😎😎
What paper is it?
It is A4 format, 0.5 mm thick paper sheet - 170 gpm.
@@rybniksealsproduction7198 Thank you
Great vid, is the First Song battotai?
Yop, metal version :D
Can u written this in English plzzz sir the Wed side name
www.papermodel.jp The web site is in japanese though, but it is not that hard to find the model. if you will use the link in discription, you will appear at the actual site with Akagi model. Than just scroll down and there are all the 30 pages. (just follow the way in the beginning of this video).
What gsm did you used?
Well, I used A4 format, because the file is in PDF locked for A4. If you would use Letter, or something else it would not work.
@@rybniksealsproduction7198 did you used a 220gsm A4 paper?
@@justinkristofferlugue1368 I used A4 0.5 mm thick.
Is that just a normal A4 paper?
No, it is A4 format, but it is 0,5 mm thick and the surface is also little bit different. I wanted to print it on A3, but it is locked in A4 format.
How did you print the 0,5mm? Did you print it on a normal printer? But I have to google translate everything.
@@jellybean3552 Yop, but I know it could be problem on some printers.
@@jellybean3552 If you will build this model too, please let me know and post pictures of your model on our facebook page: Kenpachiho review.
Can you do a paper model mississippi paddle steamer?
What the link
I didn´t really get that. If this is a pun on "what the fuck", nice. If you are looking for the link to download this model, you will find that in the description.
@@rybniksealsproduction7198he probably forgot to add the "s" infront of the "what"
Tragedia