Truth: Free Energy Magnet Motors do not work
Vložit
- čas přidán 8. 09. 2024
- Once again my interest was aroused by a so-called magnetic generator. The first idea of a viewer must be, that a self-sustaining perpetual motion is possible with such a well crafted machine. In addition the model is widely used and due to its complexity gives the impression that it could work. As you can see, it consists of a large number of magnets, all with the same polar orientation, embedded in the surface of a cylinder.The resulting magnetic rings are always shifted vertically by a small angle.The system is stimulated by a grid of magnets siting in a plastic block whose rows are also staggered. But here each column by half the distance of an intermediate space of a pair of magnets.
I try to show the flaws in design, which do not allow an never ending spin and I give you an impression of the real behavior of the motor at the end of the video.
---
#yWild
🧲 This is easily solved by adding shielding on the backside of the stator magnet. That's how I do it. The shielding creates an imbalance in the system which yields continuous rotation. Angling the armature magnets in relationships to the stator magnets also improve performance. I simply angle the shielded stator magnets. Cheers! 🍺
Hi James, thx for your comment. Will you tell us, that you’d built an perpetual motion motor which does run continuous without additional power?
Well presented video. Thanks for posting. You are absolutely correct. Magnet powered motors are impossible, and you clearly demonstrated. Good job.
awesome graphics and nice explanation.. i can see a lot of efforts put into it ... thank you.
Thx a lot for the praise and thx for watching 🙂
Okay I could see that the magnetic fields are interfering with one another in a combined space. However, I've been skilled as a vehicle,small engine tech for 30+ yrs. I use an antenna type magnet to pick up tools, metal objects ,etc. Now, the tip of that tool is disc type of magnet that I'd seen in 3.5 hard drives what that was particular type of magnetic material. The magnet is retained In a cylinder type . Open in one end. To pickup. The cylinderial part of that toll retains magnetic force. So, when I'm using tool. As a nut or bolt falls into equipment or engine compartment the extension part of the antenna magnet would not stick to surrounding walls. I am not sure what material is. But I believe this would work and create the resistance needed to prevent magnetic interference. Would be a good challenge to start turning these already in purchased gas engine some to these electric cars already made. Hope I'm right. Graphics are great.
I have to admit, I was convinced a motor of just magnets was possible for a while. In fact, it wasn't magnets that convinced me it wasn't possible, but gravity. I came up with a way to elevate immensely heavy blocks using relatively little power and figured that it could result in a gravity generator. I was so convinced of the idea that I actually looked into the math of how much energy went into my method of raising a block and how much would be returned by having it power generators as it lowered. Turns out I put more energy in than I got back.
I learned a very valuable lesson then, one relfected in ypur video. Gravity, like the magnetic field of a permanent magnet apply a force, but aren't energy, because they are constant. Energy is a change, they cannot change.
It is easy to fall into this trap. Many would call hydro electric dams gravity generators, because gravity forces the water to convert it's potential energy into kinetic energy to flow through the turbines. What people miss though, is the energy it took to create that potential energy. The part of the system that fought gravity's constant hold on the water. Hydro electric dams aren't gravity generators, but solar power generators. Sunlight, and the heat that causes the water to turn to vapor, which has a different interaction in the atmosphere with respects to gravity, is the true energy source.
In the same way, a motor playing on the force magnets apply requires a similar imbalance, change in state, or energy, to work. A motor of just pure magnets can never work alone because the forces pushing are always opposed by equal forces pulling. It is the plight or the magnets effect always being constant.
I've since learned to view magnets, not as applying some force on something, but as more of an invisible physical extension of the magnet. When you turn a handle to rotate something, there is the handle you are holding, the arm attached to the handle and the object being rotated, and then the object itself. In the case of magnets, the field between the magnet in your hand and the other magnet is simply like that arm. It seems amazing to us because we can't see or touch it. Still, it is just a handle between our magnet and the other. When our hand isn't moving, the magnets will reach equilibrium and stay as they are after that. If we move the magnet, the field, or arm, will have an affect on the other magnet, but when we stop moving, the other magnet will return to equilibrium and stop moving as well.
All the movement in the magnet is translated from the change in position of our arm, the energy we introduce into the system that imbalances the magnetic fields, or applies force to the arm.
Magnets will always require some outside change, or energy, to introduce imbalance in their fields, to make them move. All magnets ever do is seek equilibrium. Just like gravity. Change cannot come from a constant. Energy cannot come from something that never changes.
You are very skilled at modelling and demonstrating! Have you tried making a unipolar magnet? You can make one with a plastic sphere with holes in it. Orient the same type of N-S cylindrical magnets so one pole of the magnets points towards the center.
Hi Quantum, it is on my list to build in the real world, indeed. Thx for watching 🙂
A true unpolar magnet (ie magnetic monopole) does not exist.
@@geoffroberts1126 And if monopole magnets would exist, a magnet motor would also not work with monopole magnets.
No such thing as monopole magnet. It's a field.
@@heinzpgwhy not?
Ich habe mir auch deine anderen Videos angesehen. Die Magnetfeld-Clips könnte man verwenden, um daraus dreidimensionale Felddarstellungen zu machen. Damit hätten wir ein besseres räumliches Verständnis der Magnetfelder und können eine bessere Variante finden, die es eventuell erlaubt etwas über eine längere Zeit in Bewegung zu versetzen.
Hallo Tycobot,
ja, man könnte das dreidimensional versuchen, in meinem Video zum Vergleich von Magnetismus zu Gravitation mache ich dies gegen Ende des Videos.
Das Problem, das sich dann stellt ist, dass das sehr schnell sehr unübersichtlich und unverständlich wird. 2D ist hier leichter zu verstehen.
Du kannst den Untertitel in Deutsch einstellen. Hoffe das hilft. 🙂 thx for watching
Oh so beautifully explained. Now if only all the rest of the world finally believes and understands there is no such thing as free energy.
Hi Harry, glad you like it. Maybe there is free energy though. I don’t say that there is no way to get power out of space itself, but the actual method arranging some magnets it’s not able to do the job. If a system is able to run perpetual and fulfilling my gravity model, then we have made the next step. Thanks for watching.🙂
Great presentation. Thank you for your time and effort to make this video and share it with us. Greetings from Croatia.
Hi Mijalic, you’re welcome, thx for watching 👍🏻🙂
Thank you for content. It is amazing explanation and graphics.
Thank you for watching 🙂
Coole 3D Animation am Anfang... Welches Programm haste dafür benutzt ??
Ich habe für alles Blender verwendet. Thx for watching 🙂
Of course putting magnet like this is like putting loaded springs loaded against each others, no movement will occur until you have disruption of magnetic field. But magnet have power in it, a magnet motor will not be overunity, the power is in the magnet so it respect physics laws.
Thx for your realistic view on the things and for watching 🙂👍🏻
Destroys magic, makes magically looking video😂
Hi Jott, thx for your comment. I apologise for destroying dreams. 🥺 It’s the universe which makes the rules, I fear 😉. Thx for watching 🙂
Very interesting 🤔 concept 👍 well-done.
Thx for watching 🙂
yWild What is the distance between the magnets horizontally and vertically, and what is the angle of inclination of the magnets to each other diagonally in both the rotor and the stator??
Interesting. So, Muammer Yildiz Magnet Motor at Delft University was not working but, all could watching it could see that it was working. Were they hypnotized?
Hi Thaddeus, thanks for your comment. Yes it is a miracle how this video is made, but with the help of some friends it is possible to make any video with people watching. If there would be any additional evidence that Yildiz was able to build the perpetual motor, maybe I would think an other way. Thx for watching 🙂
@Thaddeus Bialic No one was hypnotized in Delft and I rate the Delft-video as genuine. There is no doubt that the Yildiz-motor ran, not only at the demonstration in Delft but also at several later demonstrations. But there remains the question: did it run by magnetic forces or did it run by a hidden accu pack and an e-motor? At Delft outer parts were dismantled but the core of the machine stayed hidden and would have offered room enough for such a cheat. Mr. Yildiz does not behave credible at all. Up to now he never agreed to a complete disassembly of a running machine. He claims to have a patent, but he hasn't. He filed one, but it doesn't mention a motor and it was also not granted. He has announced sales two times already, but nothing happened. He never submitted his motor for an examination by third party experts. He never gave detailed technical data as for instance the characteristic curve torque vs. rpm. The website of his company HMSB Inc shows no company details. I definitely rate him as scammer.
What software did you use to make this, it looks great
Just Blender, it’s free to use but initially hard to learn. If you go through the first 3 month continuous learning, it starts to make real fun. 🤪
Thx for watching.
@@yWild ever try onshape?
Not jet, but looks great. 🙂
Do you know the magnetmotor of Muammer Yildiz? He showed it running at the TU from Delft in the Netherlands in 2014. After the demonstration he dismantled the motor almost completely to show there were no hidden batteries.
Hi Henk, I know the videos, but I think, that if Yildiz machine would work as presented, it would have been the breakthrough in energy generators that anyone in the world would know right now. But it wasn’t and only some nerds know him. 😑🙂
It must be a well made fake.
Thx for watching. 🙂
@@yWild How about this one?
czcams.com/video/eBtxjyD01lo/video.html
Hi Henk, yes it is an big machine which seems to do something like self starting and the expenditure to build this must have been enormous. So it is imaginable that it must been worth the effort, but on the other side. There is no understandable principle described, how the magic was able to take place.
Most CZcamsr are CZcamsr for gathering clicks and earning money with them. If one found the solution for free energy, he wouldn’t probably make a video of it and give it away to everyone.
Yes, it was patented, but everyone can get a patent for everything new. Therefore It must not work.
Sorry, for this, but I was like you some time ago, hoping there is something hidden and the CZcamsrs reveal this fantastic new technology. Thx for your comment 🙂
@@yWild I agree with you about CZcams and getting click and likes. 99,99999% of the so called 'free energy videos' are BS 😁.
Maybe you'll find what you're looking for on the account of Rick Friedrich.
And this one seems to work.
czcams.com/video/HCRvySV0EW4/video.html
Супер спасибо большое за информацию 👍👍😀👍 интересная идея 👍👍😀👍👍👍👍👍👍👍👍👍👍 👍👍👍👍👍👍👍👍
Hi Roman, glad you like it. Thx for watching 🙂
For 15 years, I have been working with angular resonance and I am ready to do the electricity generation project together with investors who agree to make an official protocol. Everything will be done openly after the signatures are signed.
Hi Sinan, thank you for your comment. Actually you post always the same block text for an year or more. Is there any reason for doing that? 🤔
Great video, nice done the FX! A lot of work there!
Thank you for your kindness. Yes it’s a lot of work, but also a lot of fun 🤗.
@@yWild You should make a video on how you did the video! :) Very interesting!
Yes, partially I did it already, but there are too few people which are interested in, I fear. Instead I will make more videos, hoping the crowd enjoys 😉
@@yWild
☝️ Nice video 3d Design on real Earth 👍
I like this...
Ótimo trabalho 👏 sucesso aí irmão 🤜🤛
Glad you like it, thanks for watching 🙂
Amazing work and very informative
Glad you like it. Thx for watching 🙂
In my head… I feel like if you use the force of gravity in combination of angular momentum, the combination should be able to add juuuuust enough force to escape the pull from the previous magnet and repeat the process. MAYBE, this area is just such a fine line, that you have to get it juuuust right to do it. But I suppose that even then, if you were able to, the degradation of the magnetic charge would be enough to obstruct that fine line after a short while.. I don’t know, but again, it makes sense in my head. 🧐
Hi Cymatic, thanks for your comment. I tried it with the power of gravity, but it was no success. One reason was, that it was impossible to configure the magnets because the magnetic field was invisible. Then I thought about to make it visible, as you can see in my newer videos. Thx for watching 🙂
the stator magnets need to line up and they need to be the same distance apart as the rotor.
Self sabotage with limiting beliefs can stand in the way between you and your goals.
Hi Daniel, thx for your comment. If it is possible to create a perpetual imbalance just with an arrangement of magnets then someone would have invented it yet. Thx for watching 🙂
I just can’t wrap my head around why it can’t work. I believe and see that it won’t, but I just hace a impression when imagining the system that it should work. Am I just not so bright im physics?
Hi Mathus, thx for your comment. It is similar to me. Just every time when I see an, so called, working device with an new design, I think it is possible to work. But if I get a closer look and think of an magnetic field as an gravitational field, the illusion fades away. Thx for watching 🙂
Hello. Question to the author of the channel - Do you want to try to make a magnet with an atypical magnetic topology? If you are interested in the offer, then write.
Hi Ya, thx for your comment. What kind of atypical magnet do you think of? 🙂
@@yWild Hello. Thank you for answering. There is an idea to make a permanent magnet in the form of a torus. The magnetic lines of force in such a magnet will be at an angle to the torus (the body of the magnet). And the direction of the magnetic lines of force in such a magnet will be parallel and always directed only in one direction. Are you interested in my idea? I'm sorry for my English, I'm writing through a translator.
Turn it sideways. Horizontally. Also In the other video the magnet was a long bar. Try it the way it was done in that video.
Hi User, thanks for your comment. Even if we turn the system sideways, the result would be the same. 🙂 thanks for watching.
Excelente video, pero más exelente el tema que estas proponiendo. Quisiera poder crear un motor así. Gracias por exelente idea, seque existe ya. Bendiciones
Hi Wilson, I thank you for the praise. Even if it may be possible to build the machine in the real world, it would not work as desired. Thx for watching 🙂
Das Video dazu ist wirklich sehr gut gemacht.
Hi Blue, glad you like it. Thx for watching 😀
Nice animations👍👍
Dear Sir,
Out of curiosity, I watched the video that you uploaded to your account. However, I must emphasize that free energy does not exist according to the laws of thermodynamics recognized by science. All devices that would create energy out of nothing are not possible to implement. The use of neodymium magnets to generate electrical energy is also ineffective and does not bring any real benefits. Please do not be deceived by scammers who promise free energy. Instead, let us focus on developing technologies that are in line with the principles of science and allow for the efficient use of available energy resources.
Sincerely,
Hi Krzysztof, thx for your comment. Indeed I try to show why these machines are not able to work. Therefore I make the invisible magnetic field visible. Thx for watching 🙂
Yes there is no such thing as perpetual energy. Many people try to sell others on magnet motors. They say that the magnets attract to one another and continue to pull but if you know anything about magnets this is simply not the case. A magnet does not continue to pull another magnet since they attract or repel with equal force. That means that when you have this magnet and that magnet pulling or pushing they do so to the point that nothing happens. Electromagnets however can pull or repel to allow an object to hover over like such as those bullet trains and those big junkyard magnets that pick up cars. This however takes energy to do, and so is not perpetual. If you want to have something seemingly perpetual then you would need to find a way to get power from a quantum singularity... If you could figure out how to do that I would strongly advise against it lol.
Hi, thanks for your comment and your explanation. Thx for watching 🙂
@@yWild it wasn't exactly scientific. Also I noticed a huge amount of typos. It's one part my phone changing my words to incorrect words and one part my being lazy and not proof reading my post.
@@yWild I apologize for the ridiculous explanation. I hope I was not wrong it's just how it was explained to me.
Thanks for this video it gives me an idea for my project 👍
Hi Stuart, your welcome 🤗 but be aware of the detail that this machine it’s not really working. It’s just CGI. Are usually show in my videos. Why is this machines I’m not able to run. Thanks for watching.🙂
The only "free energy" that really exists is a solar pannel but even then it comes from an existing source of energy it just harnesses that source
It works. This how it works.
Hi Doogi, I’m sorry, it is just an simulation. Just to show the expectation at the beginning of the video. At the end you can see the real behaviour.
Thx for watching 🙂
Loving the graphics!!
Hi Dan, glad you like it. Thx for watching 🙂
I really like your animation can you please tell us how you do this
Hi Lumen, glad you like it 🤗. I do this videos with the help of blender, an awesome 3D Rendering Programm. Including motion tracking for the animations on the real world 🙂. Thx for watching
Free energy is easy and all around us. The powers that be don’t want you knowing that. They want your money = riches = power.
Hi RS, thx for your comment. Yes, energy is around 🙂, thx for watching.
Ty for your efforts in this educational video, I feel it only right to subscribe.
Thx a lot for your good words 🙂. I will do my best to entertain you in future also. Thx for watching 🙂
Great video and great explanation. Unfortunately you are not able to convince the “Glue Gun Inventor Masterminds”. They will always come up with something different (a magnet here, a magnet there, other diameter, different magnet position,…….bla bla bla) it never ends…..
Hi Holger, yes, this might be right, but I’ll try 😅.
Thx for watching 🙂
@@yWild bonjour 👋 sa fonctionne le TRUC...
@@yWild I’m fighting this “war” everyday about “Hydrogen, fuel of the future?” (No, it isn’t the fuel of the future, but it’s so hard to convince people…)
If no one had ever tried the "impossible" anyway, we would still be living in caves now....
That’s right. It’s okay to try out all possibilities. But it is not okay to do so, as if it would work but it does not. Most videos like these are just fake.
The reason is the invisibility of the magnetic field. And I try my best to make fake visible 😅
It doesn't work correctly because your not doing it right, don't down something just because you don't understand.
Hi Mark, thx for your comment. I understand the principle for sure and I understand why so many people believe in these devices. But if you think about them in terms of my gravity model, you may recognise that a permanent imbalance is not really actionable. Thx for watching 🙂
Great conception and best efforts therefore I would help you to know more about magnetic motor secrets...its a metalic shields around every magnet of the motor in order to keep only one direction of magnetic field. Example you may delete S or N .then there will no attractions anymore
Hi Adams, it is nearly impossible to block an magnetic field that way, because the field just uses the space left over to implement north and south poles in an unpredictable way.
I already tried blocking materials.
Thx for watching 😄
Why cant we use the rotation to generate electricity like a car charges alternator whilst the wheeks move
Because the wheel can't even spin on his own.
Bro, was there electric wires installed practically? Shouldn't we install wires and check volt if generated or not.
If it was unstoppable rotation by magnets, wasn't that mechanical energy generated?
Just an illusion 😄 thx for watching 🙂
@@yWild 🤭🤭🤭 really. Ok
😎👍🏻
Wow echt geiles Video muß man sagen gibt es auch Baupläne bzw. 3D Zeichnungen dazu die man Dow loaden kann?
Danke dir. Das Ganze ist nur eine Simulation und funktioniert nicht wirklich. Das genau möchte ich ja mit dem Video sagen 🤗. Ich kenne keine Bauanleitungen.
Thx for watching 🙂
I experiment with magnets too see my new video but
- no way! there is a point that calls: zero-point
It means:
that you Can't come over the magnets where your motor' run endless
... It stops
- v gate
- 3 gate
+- ++ - - and so on
I try all!
Maybe with gravity and a half flywheel ( not too heavy to flip over)
But it doesn't work,too
Maybe one day with all + a gear 1:3 Or so
Hope you find the magical blue print 😉. I fear, it’s impossible. If you see magnetic attraction as a gravitational thing, you will understand why.
Thx for watching🙂
Pa que tanta explicacion es similsr a un toroide espiral
Explanation is important for all the people who think it could work.
Thx for watching 🙂
Splendide for animation 3D
Thx a lot 🙂
Dejan de gastar dinero y tiempo en diseños que no funcionan ni pueden funcionar. Para hacer un motor magnético primero tienen que encontrar un material que permita hacer que el flujo magnético pase en un sentido y ni en el otro, esto es un DIODO MAGNETICO. Usen todo su dinero, tiempo e imaginación en investigar este tema, el que lo logre ganará mucho dinero, fama y resolverá el problema de la energía para la humanidad.
Super Video! Abo ist raus. Ich verfolge das Thema schon sehr lange. Ich bin auch der Meinung, dass es nur mit normalen Magneten nicht funktioniert. Was aber, wenn am Stator Elektromagneten verbaut sind? Im richtigen Moment ziehen diese an und am Scheitelpunkt schalten sie ab. Hier vermute ich eine positive Bilanz.
Hallo Berny, danke dir, ja, mit Zuführung von etwas Energie wirst du sicher das gewünschte Ergebnis haben. Mein Thema sind all die manipulierten Videos in welchen die Macher zeigen, dass eine Maschine möglich ist die nur aus sich selbst heraus Energie generiert.
Thx for watching 🙂
@@yWild Hallo yWild, danke für die schnelle Antwort! Untersuchst Du vielleicht auch Ansätze, die vielleicht funktionieren? ^^
Jupp, das tue ich. Ich habe 2 Videos in welchen ich neue Ideen stimuliere, z.B scorpio.
Hast du denn ein neues Konzept?
Bonjour yWild.... effectivement sa fonctionne le principe manque d'explication
La cinétique primordiale du fonctionnement.....
Thx for watching 🙂
Usuń jeden rząd magnesów z cylindra a drugi po przeciwnej stronie i zacznie prawdopodobnie działać. Na cylindrze muszą być przerwy. I sugeruję zrobić takie szczęki w okół cylindra z taką samą lub podobną liczbą magnesów.
Great idea. If I find some time I will proof it. Thx for watching 🙂
Das ist ein tolles Video und du erklärst es auch gut, leider verstehe ich nicht gut englisch. Ist es bitte möglich, dass du eine deutsche Tonspur hinzufügst? Mich interessiert dieses Thema auch schon seit längerem, aber leider ist immer alles in Sprachen, die ich nicht oder nicht gut kann. Danke :)
Leider kann man bei CZcams aktuell nicht mehrere Tonspuren verwenden, daher unterstütze ich primär englisch. Sorry but thx for watching 🙂
@@yWild… ich würde es gern kaufen ! Bitte um Antwort
Hi Uwe, es ist nur eine Simulation und ich versuche darzustellen, dass solch ein Gerät nicht funktionieren kann. Darum kann man so etwas zwar sicher irgendwo kaufen, aber es ist leider ohne Funktion 🙂. Thx for watching
Just because u dit not succeed does not means it is not possible.. xxx one love
Hi Rinuz, thx for your comment. I try to show people a different way of thinking about these devices. Working with invisible magnetic fields is complicated, but gravity is understandable to everyone immediately. Thx for watching 🙂
@@yWildnothing different about it.. titel is very common..trying to debunk is very common and easier than keep on trying until it works... lots of stuff out there..that does work ..seach and u will find.. keep on trying and u will succeed..
Hi Rinuz, thx for your comments. If there were any working perpetual motion motor, the inventor wouldn’t just make a CZcams Video about. Instead he would try to make money and after that science and Industrie would have started to bring the concept into the world. The oil industries couldn’t prevent this from happening. The idea is more than 50 years old and no one has actually an working device I know of. Think about it and think of my way to say what’s the reason of this. Think gravitational 🤭. Thx for watching 🙂
Not even one. Not a single one.
@@yWild that is your idea.. perception..there are people who look beyond money...fame status.. and care for the health of the people and the planet.... xxx one love
Where is your copper coil? Without the coil you're not catching the energy generated by the magnets. Hence the reason you're not getting any voltage or power output.
Hi Tj, thx for your comment. Yes, it’s just build to show the principle. Thx for watching 😉
Autorom szacunek oraz serdeczne podziękowania ślemy za świetny materiał edukacyjny oraz pracę bezwarunkowo rozdawaną polecamy temat waszej uwadze pojąć oraz rozpropagować świetny.
Thx for watching 👍🏻🙂
W Malezji uzyskali patent na to. Gdyby nie działało...
A patent unfortunately is not checked if the construction does really work, just proved if there is no other similar idea patented. 🙂
To pewnie idzie takie coś kupić zmasz jakieś namiary i czy masz takie cos
A respetado la posición de los imanes Sur norte sur del estator?
Hi Quince, without taking this into account, the principle wouldn’t make sense. The stator would act as one single magnet and nothing would happen. 🙂. Thx for your well thought question.
Biete besten Preis für diesen Motor, will ihn haben ,will ihn haben !
Hallo Peter, alles nur illusion. Den Motor gibt es nicht wirklich 😄. Thx for watching.
Congratulations !
Glad you like it, thanks a lot. 🙂
As it obviously works, why don‘t you mass produce it not by yourself?
You need to try a v gate
Hi Mike, thx for your comment. When it comes to other magnetic constellations, you may have a look at my other videos. Thx for watching 🙂
супер. а если намотать катушку будет вырабатывать небольшую электрическую энергию? или сопротивление затормозит?
Hi, glad you like it. Because I don’t build working machines, it’s all CGI, there will be not the ability to generate power. Exactly that’s the reason I do these videos. Thx for watching 🙂
@@yWild thanks for the reply sir
Ever seen the inside of a wind generator made from magnets so you're saying wind generators don't work
Hi Brand, thx for your comment. I apologise, I don’t know where I have said something like that. I am sure that wind generators are able to work. But I’m also sure, that perpetual motion magnet motors don’t. Thanks for watching. 🙂
Why does someone makes a video, which only prooves his inability in thinking for himself. He builts some things together and they won't work as they should. And thats the prove for all of the other magnetic based motors? Are you kidding me? There're many workimg magnetic motors, but no one is silly enough to tell everyone, because after that there comes a lot of trouble. It's only perpetual motion, if your machine works in a closed system. Therefore any machine, that can do work while getting energiy from the outside (like e.g. wind, electricity, fuel, sun, magnetic force) is NOT perpetual motion in the sense odf a perpetuum mobile, because it's an open system. And because of this, the law of conservation of energy isn't injured in any way. The law of conservation of energy is valid for closed systems only. Why aren't the most people able to think about things like leverage, force flux lines into new direction or temporary shielding them at the sweet spot, etc. It seems to be much more easier to make a mainstream global statement (wrong or not doesn't matter) without any meaningful arguments nor thoughts.
Hi John, thanks for your comment. Using the gravity model is able to prove a design which is probably not able to work. Thx for watching 🙂
Gut gemacht, weiter so
Hi Soldier, danke dir. Thx for watching 🙂
Anyone who took a high school physics class and passed the exam won't waste their time on something that is known to be impossible.
Hi Kurt, thanks for your comment. I’ve got an diploma in computer science, but was so curious that I tried some designs out to test by myself if there is an possibility to do what no one has done before 😄 thx for watching
also, this video is part tru and part not true. magnets themself wont create the electricity. but if you have a motor, those magnets can spin it and generate the electricity. ive personal done it and it orls flawlessly and is a proven fact. same concept as a wind turbine.
Hi Eye, thx for your comment. Yes, it is possible to generate electricity with an magnet motor if you use an external force to run it. Many people show machines that generate power without being continuously pushed to run. I try to reveal these as fake and that’s what my videos are about. Thx for watching 🙂
The magnets need shielding around
Hi Tolis, thank you for your comment.
Maybe, but my experiences with magnetic shielding show, that shielding just compress and bend the field without reducing its strength. on the other hand, almost nobody who shows free energy generators videos on CZcams uses shielding. Thx for watching 🙂
Bro, was there electric wires installed practically? Shouldn't we install wires and check volt if generated or not.
If it was unstoppable rotation by magnets, wasn't that mechanical energy generated?
Bro, was there electric wires installed practically? Shouldn't we install wires and check volt if generated or not.
If it was unstoppable rotation by magnets, wasn't that mechanical energy generated?
Iam from india
I have a doubt that it will work ar not please tell me truth
Hi Warlord, I’m sorry 🫣. Thx for watching 🙂
Hi,Just notice ye Channel,it's fantastic.
Glad it enjoys you. Thank you so much 🙂.
It works, it's just that you didn't discover solution yet.
Hi Thien, thanks for your comment. Yes, you may be right. But it’s also true that actually there is no working perpetual motion device around. If there would be one, someone tried to make money with it. 🙂 thanks for watching.
@@yWild Here is one of the free energy method. czcams.com/video/mQjKifNv0vA/video.html
Juicy 😄👍🏻
what if you add some mercury
Hi Hamza, thanks for your comment. Mercury is not the solution for everything, I fear 🤪. Thx for watching 🙂
Perpetuum mobile does not work. That is all.
Hi George, thanks for your comment. You are so right. That’s exactly why I do these videos 🙂. An perpetual imbalance is not part of our universe. Thx for watching 🙂
4:10 la gravedad no existe. Es densidas.
Hi German, thx for your comment. It’s an transformation from magnetic force to gravity force to show the invisible. Thx for watching 🙂
Hello can i buy this item
Hi, unfortunately you can’t buy it, because it’s just an CGI and my try to show why such machines are not able to work. Thx for watching 🙂
Mıknatıs motorları böyle çalışmaz. Hedef saptırıyorlar. Konuyu sulandırıyorlar. mıknatıs motorları gerçek. siz, iki mıknatıs arasına koyabileceğim, onların mıknatıslanma etkileşimini engelleyen , kompoze veya alaşım bir levha bulun . ben size gururla serbest enerji motorunu yapayım :) bu mıknatıs motorunuzda basit şekilde hız kontrollü olarak dizayn edeyim :) Aslında bunu yapabilirim. Bir sorun var. Benim can güvenliğimi , petrol endüstrisinden kim koruyabilir. Böyle bir buluş abartısız katrilyon dolar değerindedir. Ama bu değer sizin sonunuz olur.
Hi Ramiz, thanks for your comment. You may be right. So I would be glad to see an working design , which works fulfilling even my gravity model. An perpetual imbalance. Thx for watching 🙂
All you have proven here is that your faulty lazy design does not function! Nice Job!
Hi Jon, thanks for your comment. Maybe it’s faulty, but in the end might there no working design because our universe does not like these infinity things 😄. Thx for watching
6:53 here is unstable point. Its can not move.
The whole thing is a kind of unstable 😄, thx for watching 👍🏻🙂
@@yWild You can believe me, we have stable design for working motor and its not complicate design😉
Sounds great. I wish you luck, that it will work 🙂
Крутится она при помощи тех же эффектов что и собирается))))
Hi mR., thx for your comment. It spins because it’s an simulation. At the end of the video, you can see what really would happen. Thx for watching 🙂
IT does Not Work this way for Sure! 😅 Free Energy does Not mean free of own Research!
Hi Joscha, thanks for your comment. Yes research is important. I try to show in which direction research is hopeless and give an understandable explanation why it’s this way. So people can decide their direction on this base . Thx for watching 🙂
БЕСПЛАТНЫЙ СЫР БЫВАЕТ ТОЛЬКО В МЫШЕЛОВКЕ.
Hi, great! Thx for your funny comment. 😄 thx for watching
Unfortunately you not telling the people that this is a visual effect video without any physical proof. This will not work in reality. But respect to your CGI skills 🙂
Glad you like it. I just show physical machines which are shown in other guys videos. Then I’m showing the reason why they don’t be able work.
Thx for watching 🙂
how thw f did u make this video. dang that was dope.
Hi Eye, just playing around with an free Software called blender. Thx for watching.
@@yWild its absolutely amazing. wow
It's working Soo u see your self
Maybe you write in the videos Headline, "MY Magnet Motor do not work" ;) ich denke ich kann auch deutsch reden, du hast son typisch deutschen englischen Akzent :D
Mit dem Thema musst du dich schon ausführlicher beschäftigen, denn einfach magneten an paar Platzikteile kleben, das reicht leider nicht, das wichtigste ist ja ein ungleichgewicht bei Anziehung in die gewünschte Drehrichtung zur Gegenrichtung zu schaffen, was auch schon bei hohen Drehzahlen ohne jeglichen weiteren Bauten funktionieren würde, aber wie hoch diese sein müssen kann ich nicht sagen, um was es dabei geht, einfach mal das hier schauen:
czcams.com/video/mwlzqX9WAdo/video.html
Was Quantum Energy meinte ist auch eine Möglichkeit, einen Art Monopol zu erschaffen, der Lüling hat es gemacht, in dem er die Magneten im richtigen Moment räumlich entfernt hat, über eine Feder...
Hi Peter, danke für deinen Kommentar 🙂. Du hast Recht, es gibt die Überlegung mit sehr hohen Geschwindigkeiten zu arbeiten. Ich glaube ich werde ein Video dazu machen, in Übertragung auf meine Gravitations Methode. Ich fürchte, dass es weiterhin ein symmetrisches System bleibt, aber mal sehen,
Zu dem was Quantum sagte: Ja einige denken das magnetische Abschirmung eine Lösung sein könnte. Ich habe kürzlich ein Video dazu gemacht, was der Grund ist, warum das nicht funktioniert. Das abschirmende Material geht selbst in Wechselwirkung mit dem Magneten.
Und zu der Idee einen Magneten zu erschaffen, der nur einen Pol hat: Das wäre wie ein schwarzes Loch, die Magnetlinien breiten sich immer zwischen den Polen aus, ein Abschneiden ist kaum möglich. Nur biegen. Zudem stellt sich die Frage, was das bringen soll, denn der grundsätzlichen Lösung kommt man damit nicht näher. Thx for watching 🙂
@@yWild Schau dir am besten mal den hier an:
czcams.com/video/X6dj_0cVowY/video.html
Das entscheidende Abschirmungsexperiment ist bei 10:34
@@yWild Ah und ich kann mir vorstellen, dass man hier auch bei einer guten stabilen Bauweise, eventuell mehr Energie rausziehen könnte:
czcams.com/video/64DRfHfSng8/video.html
You ever think engineering all magnet motors may not be your gifting? You might want to stick to computer graffix.
Hi Weslingm, yes I will 🙂. Thx for watching.
wrong shape why doesnt work change it
Hi Jay, thx for your comment. I took the shape from a video where the CZcamsr showed it as if it works. I looked at it with the help of my gravity model and found the reason why it is not able to run perpetual. That’s my video is about 😀. Thx for watching 🙂
density, not gravity, if earth is flat
My fault 😉😄. Thx for watching.
Hallo könntest du bitte die Beschreibung in deutsch zusende?
Hi Jan, es tut mit leid, ich kann leider nicht alle Sprachen unterstützen, auch wenn mir deutsch am leichtesten fällt.
Wenn du eine Frage hast, dann kannst du sie gerne stellen.
Thank you for watching 🙂👍🏻
Ok...why does it not work?
Hi Burt, thx for your comment. If you like to know this issue, just watch my video. I try to explain why such an self sustaining machine is not able to work. 🙂
Asi mismo lo diseñe en mi cabeza helicoidal
Thx for watching 🙂
Nice animation. But you're right it doesn't work.
Thx Paul, glad you like it. Thx for watching 🙂
Why do people then pay for electricity and heat?😕
Because the generator shown doesn’t work as desired, it’s only CGI. The main reason to do the videos is to show, that most perpetual motion machines on CZcams are fake. Thx for watching 🙂
energy freedom where are you?😭
Somewhere over the rainbow 🌈 😎
somewhere in space 🛸👽
Who knows 👍🏻😉
Moteurs magnétique Perendev..... je connais.
Sorry, je ne parle de francaise 🥺. Thx for watching.
Pas 🤪
310 commentaires :: bonjour à tous ::: je voudrais savoir ou est basé cette personne et son nom... ? Grand merci de votre réponse a tous... Cortes jean 70000 ... un simples citoyens Français et pauvres gens... voici des années q je cherche a joindre ses personnes.... grand merci de vos réponses....
I’m so sorry. I don’t know what you want to say, but thx for watching 🙂
Ty neznáš jak funguje magnetické pole? Tohle může udělat jenom amatér.
Hi Milan, thanks for your comment. No magnetic field, just CGI. Thx for watching 🙂
i so video from the people who claim they made it work, they use magnatic at left and right to make it turn
Hi moon, thx for your comment. However they make it work, it’s just for the clicks for the video and not for producing energy. Thx for watching 🙂
HOAKS sepanjang MASA 😅
Hi Smd, thanks for your comment and thx for watching 🙂
Your doing it wrong. You have the right principle but the two objects need to be within one another. Tube within a tube. And run by a pcb that has coil capacitor but you would need to look i to that as many configurations for this. Good job for your hard work. But its not the end of the set up to get it working.
Hi Liann, thanks for your comment. Yes it’s not the final configuration which is able to do the job, but neither anyone has found it 😉. My next video Deals with the full tube.
Thx for watching
Secret to everything working effienctly is frequency:p instead of the magnets you can get free energy from coils they have there own natural capacitance :) google coil formula has many formulas for certain configurations. I have lots of information on this if your interested.
Hi Liann, if really a perpetual motion machine exists, the inventor might not show it on CZcams or share it with the world. That’s the best hint, that all the blueprints are just ideas without material worth. Thx for your comments 🙂
Poor design. There are working models, just gotta dig a little deeper.
Hi Maverick, thx for your comment. May be, but actually there is no cheap generator in everyone’s cellar empowering the house. These ideas exist for soo long, actually. I would be glad to see a working one. Thx for watching 🙂