1967 Ford Mustang Fastback - Widebody 570HP T56 Build Project
Vložit
- čas přidán 21. 05. 2018
- Please Subscribe to Our Channel
-----------------------------------------------------
1967 Ford Mustang Fastback - Widebody 580 HP T56 Build Project
Engine:
427″ (351W) built by Smeding Performance
580HP & 580TQ
Zoops “Posi-Trac” system
Holley fuel system
US Radiator cross flow
Magnaflow custom exhaust
K&N filter
Drivetrain:
Tremec T56 Magnum 6-speed transmission
McLeod RST dual disc
SFI scatter shield
Hydraulic T/O bearing
Currie Enterprises 9-inch rear end
31 spline axles
54″ width(A/F to A/F)
3.89 axle ratio
Tru-Track posi
Handling / Braking:
Wilwood 14-inch front brakes w/ 6-piston calipers
Wilwood 14-inch front brakes w/ 4-piston calipers
Michelin Pilot Sport tires, 295/30/18 front and 335/30/18 rear
Billet Specialties “LeMans” wheels, 18×10 front and 18×12 rear
Additional Suppliers:
Redline Synthetic lubricants
Inland powder coating
Lokar
Inland Empire Driveline
Kicker
JME Enterprises
Ididit
Borgeson
EMJ Metals
Autometer
Vintage Air
Ricks Stainless
MSD Ignition
Pomona Valley Customs (PVC)
Danny’s Paint Shop
Atlas Polishing
Builders: TCI Engineering
Check Their Web Page: totalcostinvolved.com/
Don't Forget to check Their CZcams Channel and Subscribe(They deserve more Subscribers): / tcimuscle
Build Source: www.moddedmustangs.com/forums/...
Second Source: mustangsdaily.com/blog/2013/11...
-----------------------------------------------------
This video purpose is to tell world about amazing car build project and to inspire ever growing car builder community around the world. So if you're inspired in building your own car and want to learn more about how to do it in best way, don't hesitate and read build source page so you can learn something new and if something is not clear you can always ask builder some questions about the build. - Auta a dopravní prostředky
Very cool car, my guess most people commenting on this fabulous build don't understand what a 67 piece of old junk car realy is [ worthless ] and this great build has surpassed all expectation, wish this car
was sitting in my front yard
To the select few that will actually watch these videos from start to finish, I thank you..... it shows the dedication needed to complete cars like this. Good luck in the future.
I watch every video from start to finish,that shows I have a true love for cars being built by the best.I build my own cars and yes they look great when I'm done but this is another level all together and I know I will get to this level of workmanship one day soon.I learn by watching.
sorry to be offtopic but does anybody know of a tool to log back into an Instagram account..?
I somehow lost the login password. I love any tricks you can give me
@Willie Jeremiah instablaster =)
@Eddie Remington i really appreciate your reply. I got to the site thru google and im in the hacking process atm.
Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.
@Eddie Remington it worked and I now got access to my account again. I am so happy:D
Thanks so much you really help me out :D
I'm an avid car lover and builder (only for myself) and love the cars you build and YES I do watch every single one of them all the way through,start to finish.I do gOOd work but not as nice as your builds.Keep 'em coming,I can't get enough.Thank You.
You guys are legit. The fabrication was above an beyond. The body an paint looks absolutely beautiful. All the custom touches truly show off your vision. Some body otta smack the guy who went sticker happy. Had I painted that i would be heart broken over those stickers. The metal finish work was on point so hopefully those are magnets.
Great color ! And great job in general on this project ! Carol would be proud !
Not the biggest fan of the wheels but the car is superb
Really like the way you went about building the front air dam.
I have no idea how 80 thumbs down can be right or real.These people need to have their heads examined.Their has to be something wrong with them.
rockymontana1 well it’s a really nice build but the fabrication seems really crude compared to a lot of the other restomod build on this channel.
If the fabrication is crude,I'll take crude all day long.I like clean and immaculate like I have before I even started doing cars.
i own a 67 like yours , i appriciate the work you have done , all the metal fab etc but from a mustang fan, point of view the way was look way better.
The mechanicals say it's a track car but the body says' it a show car. If it was mine it would never see a car show.
Мммммаааааа қотақ
absolutely beautiful machine..!!
Just found your channel recently! Love your designs and quality of work !👍👍🇨🇦
It's my dream car which can never be come true😢😢
Very good job! The car looks awesome!😀
Schweet car! Engineered well and I appreciate the attention to details. Many times 90% of the time to build is wrapped up in the details; stuff that no one actually can see and might be only a small per cent-age of the entire build.
Video editing sucked though. I know that editing is easy on big projects like this and the build process isn't necessarily linear, but too much jumping back and forth. Completed process is shown and then a few minutes later the steps which led up to the completed process are shown.
Loo olok
KM IKLN looololo ol pi IKLNi KM okoloool l oooo IKLN ok lllllll
Beautiful machine!
PARABÉNS PELO BELO TRABALHO.
That looks like a Dub city model you see at walmart. What a way to ruin the sexy lines of a 67 fast back.
It looked better when it was in white
great build guys..
🤩❤️🤩❤️nicely done awesome build...!!!
Very good.
excellent Mustang bro well collected the legendary car and like
FAZ VÍDEO DUBLADO EM PORTUGUÊS
Lmao at everyone in the comment section acting like this car was in any way shape or form built to please them
1967 ford mustang fastback
Classic looks but badass performance good-looking Mustang
i am a major mustang fan . the chassis and engine up grades look great .. but the body and interior changes simply suck . well done but personally i would not want the car .
great job on the build. nice attention to detail.
Gostei do carro
тачка отпад!
Muito bom esse canal adoro seus vídeos
Sweet! That’s Ed Moss’s car. He owns total cost involved. I have seen this car a few times.
Saddest thing I've ever seen.
From what cars I can pull the T56?
I have 69 mustang and thinking to do a 5.0 coyote engine swap with T56.
Muito legal
How about a 1992 ford thunderbird racecar?
👀👍👍👍
I respect the craftsmanship but personally think that it is a waste of a perfectly fine 67 Fastback. Why not use one that is basically rotted out and in need of all new sheet metal instead?
zachary watters ummm... Did you stop to think that there are people in the world who I don't know... Have a preference? Yeah, didn't think so stfu.
ALL CLASSICS SHOULD BE RESTORED BACK TO THE WAY THEY WERE!!!! THE WAY THEY CAME FROM THE MANUFACTURER!!!!! PERIOD!!!!!
Hello Guys , i Really Enjoy your Vids , i have a project i am working on Now which is switching my FWD To An RWD i have Renault 25 Model 1990 which was weird Cars made originally To Compete With BMW M5 And Mercedes Benz E Class Yet i was Made With FWD and a Straight Engine ...... In a Long Heavy Car?????!!!!!!! ..... any way i love the Car and Its Body work so i will Swap the Engine To an LS Engine With Rear Differentials Of BMW E60 any advise ??
How much its well worth it
То что сейчас модно выглядит, через 10-20 и более лет будет "Колхоз"
Hello sir
А сейчас пенопласт! одноразовое, тонкое пластмассовое,. Даже сидения жесткие.
Looked better stock don't mess with classics
Well done even though it’s a Ford .
Overkill.
Swwwweet!
only its silhouette is original..I guess that's a good thing
but too much bling makes it a ' snot-rod '
and thats not appealing , when only rich snots can afford technology , safety and comfort
I don't like the door handles. The rest looks good but it needs Chrome bumpers. !!
Just a flair kit the body is not wider
A slide show ain't no video. Nice car crappy "video".
The body kit and interior were poor choices. The craftsmanship was great though
I don't get it if they don't like the car for the way it was why do they have to change it they took they way the car looked make there on car don't mess up a great looking car sad
...you need a driver, call me
Wide body? More like flared fenders
The "flare kit" looks like an afterthought stolen from a 4 x 4 truck or a JC Whitney catalog. Please learn how make wheel flares or don't bother with them.
No body is making you watch. They're made well and they look good.
sorry dude , this 67 is way passed flare kits ... go take a nap you will feel better when you wake up
Hope you kept all the original parts?sorry boys I'm not loving it
These cars are classic,not because their old,because they never grow old,sure
Updated set of wheels,update suspension, update paint,interior, update motor, that's all things that can be reinstated later with original bits,
Don't chop it's head off,
Yes your good tradesman,yes yes and yes,
You can cut up GM, spear the good gear,
The classic car was noisy, unreliable, bad suspension. Any modification with modern parts is an improvement. I owned a 4 year old 1969 Mach 1 so I have first hand knowledge.
you ruined a perfect car....
ой мля не русские все!!!
Oh dear. How to ruin a classic. Each to their own, but not for me.
it is so easy to make a 67 mustang look cheap and a piece of junk ... sad to see all that work and such a great car not followed up with good styling . i guess that is why chip foose gets paid the big bucks.. this car team built a wonderful car ... but came very close to the line to make this car look like a piece of cheap crap... but didnt cross the line ... the car could have looked so much better
Again another build that's lost it's soul...
Oh my God another Mustang how boring