SIMPLE WOODEN WHEEL LIFTS | Cheap & Easy vehicle support!
Vložit
- čas přidán 6. 09. 2024
- For more pictures and information on my projects, please check out my Facebook and Instagram pages!
FACEBOOK: / milkcrate82
INSTAGRAM: / milkcrate82
I needed some additional vehicle supports for an upcoming suspension project I have for the squarebody Chevy c10 project truck. These are simple wooden wheel supports made from fence posts. They should be able to support a good amount of weight as well as having a much larger footprint that simple jack stands.
I'm so looking forward to watching how you bag your truck.
lookin good milkcrate.
+guns1war Thank you sir!
I can see some ramps being made to allow a vehicle to drive up on them.
i guess it's quite randomly asking but does anyone know a good place to stream new tv shows online ?
@Salvatore Luis flixportal :P
@Marshall Angelo Thanks, signed up and it seems like a nice service =) I appreciate it!!
@Salvatore Luis you are welcome :D
Was that a bat or a very large moth that flew by at 2:10 ?
If you are going to do a suspension mod , won 't it be better to support it on the frame , thus your suspension is free to remove
Yes. But I have to work with the space that I have. My biggest concern is that my driveway is slightly sloped. I wanted something to support the truck that also had a large footprint that would not tip over. My plan is to work on one end of the truck at a time using these wheel lifts under one end, and traditional jack stands under the frame at the other end.
***** Oh , I see . Cool
You show building a 6 log high stand. But then, at the end, your truck is on a 4 log high stand. Did you change your mind and think it was too tall after all?
I agree...WTF? I also want to see him put it up on the 4 or 6 log stand.
+tardzan1968 I had to take some wood out because my floor jack would not lift the truck high enough. Turns out that a 4 log stack was high enough anyway.
what air suspension you are getting?
Accuair air management. Bolt on brackets for the front bags and a custom link setup for the rear.
do you know where I could find a k10 1977 truck bed?
Theres one up there 🖕
T shirt spanish...good
why not show the stands with the truck on them??
9:45
+jason3fc ... The stands you built in the video are 2 pieces of landscape timber taller than the picture of the truck at the beginning of the video...the picture at the start of the video, with 4 pieces of 3" timber would only lift the wheels less than 12" as the tires fit between the top 2 pieces...the pair that you built have more pieces of landscape timber on top increasing the height.. why the difference??
My floor jack would not lift the truck high enough to slide the taller stands under the tires. Had to take some wood out.
milkcrate82 ...time to build a raised stand for the jack so it will lift as high as u need...👍
milkcrate82
Life insurance paid up?
did you know there is someone named Stuart Parsons posting your videos
I do now!! THANK YOU for letting me know!
nice are you going to ls swap lol
Haha! Not yet... just air bags.
Ooooh cool that would be the 94th million LS swap. So original and amazing. I wouldn't put an LS bellybutton motor in any of my trucks if it was given to me free
...um please no